Weld Engineer

Johnson Controls, Inc. Eunola , AL 36340

Posted 3 months ago

What you will do:

Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals by performing the following duties.

How you will do it:

Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures, discover new patterns of welding phenomena, or to correlate and substantiate hypotheses.

Prepares technical reports as result of research and development and preventive maintenance investigations.

Establishes welding procedures to guide production and welding personnel relating to specification restrictions, material processes, pre- and post-heating requirements which involve use of complex alloys, unusual fabrication methods, welding of critical joints, and complex post heating requirements.

Evaluates new developments in welding field for possible application to current welding problems or production processes.

Directs, trains, and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification.

Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information, or offer technical advice concerning welding matters.

Performs experimental welding to evaluate new equipment, techniques, and materials.

Other duties may be assigned.

What we look for:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Bachelor's degree (B.S.) in Mechanical Engineering or equivalent with four to ten years related experience and/or training; or equivalent combination of education and experience.

CERTIFICATES, LICENSES, REGISTRATIONS

American Welding Society (AWS) Certified Weld Inspector (CWI) or equivalent preferred.

Johnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries. Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat. We are committed to helping our customers win everywhere, every day and creating greater value for all of our stakeholders through our strategic focus on buildings.

Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Diesel Fleet Mechanic Technician I Apprentice

Sysco

Posted 1 week ago

VIEW JOBS 9/7/2019 12:00:00 AM 2019-12-06T00:00 Company: Sysco Gulf Coast Location: US-AL-Geneva Zip Code: 36340 Minimum Level of Education: Not Applicable Minimum Years of Experience: 0-1 Position Type: Non-Exempt Travel Percentage: 0 More information about this job: This position is located at 2001 W Magnolia Ave, Geneva, AL, 36340. OVERVIEW: We offer our associates the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why we’re at the heart of food and service. POSITION SUMMARY: To assist Fleet Technician II and Fleet Technician III in providing safe, reliable and cost efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to diagnosis and repair as required to prevent breakdowns on road, reduce vehicle down time and improve total fleet reliability. RESPONSIBILITIES: A. Learn to perform required inspections and preventive maintenance under the guidance of fleet technician II & III or fleet manager on vehicles and equipment to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet. 1. Learn to perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light duty vehicles and any other company owned equipment under the guidance of fleet technician II & III or fleet supervisor or manager in accordance with all federal, state and local legal and regulatory agencies. (Includes all state required inspections and frequencies). 2. Learn to perform quality preventive maintenance inspections per company methods under the guidance of fleet technician II & III, fleet supervisor or manager on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light duty vehicles and any other company owned equipment. 3. Learn to perform quality maintenance repairs under the guidance of fleet technician II & III or fleet supervisor or manager as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light duty vehicles and any company owned equipment. B. Learn to perform maintenance repairs on all vehicles under the guidance of fleet technician II & III or fleet supervisor or manager such as inspections, scheduled repairs, malfunctions and road-call repairs in a safe, efficient, timely and quality manner. 1. Address all Driver Vehicle Inspection Report write ups timely, efficiently and correctly the first time under the guidance of fleet technician II & III or fleet supervisor or manager. 2. Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems under the guidance of fleet technician II & III or fleet supervisor or manager. 3. Follow procedures including documenting all work performed on work order using complaint, cause, and correction format under the guidance of fleet technician II & III or fleet supervisor or manager. 4. Learn and develop efficiency in Sysco computer programs under the guidance of fleet technician II & III or fleet supervisor or manager Education and / or Experience: Medium/Heavy Duty truck technical training 2 year school (preferred) 1 to 3 years of fleet maintenance and repair preferred (No experience required) High school diploma or equivalent required Current and valid driver’s license (CDL Preferred) Professional Skills: Basic knowledge and skill of all vehicle systems and components Basic knowledge and skill in diagnosis and repair of electrical systems on all equipment Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG) Basic computer skills and knowledge Qualifications: Technicians must own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance inspections, repair and diagnostics. Apprentice will have performance reviews regularly to determine areas of improvement and areas that require additional training and development Annual Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) Brake Inspector Certification Knowledge, Skills and Abilities (Preferred, Not Required) ASE certifications – Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required) 609 HVAC Certification (Preferred, Not Required) Working knowledge of computer based diagnostic software for OEM’s and component manufacturers Apprentice will be required to complete Sysco SIU training modules for safety and other required courses. Physical Demands: While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle or feel, reach with hands and arms, talk and hear. The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl. The employee is occasionally required to sit and must frequently lift and/or move up to 100lbs. The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools and other shop equipment. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Working Conditions: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of the job. While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces. The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call. The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.). The associate is occasionally exposed to high, precarious places and confined spaces. The associate is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job description in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the employee in this job. The employeewill be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This job description supersedes prior job descriptions. When duties and responsibilities change and develop the job description will be reviewed and subject to changes of business necessity. Applicants must be currently authorized to work in the United States. Sysco Gulf Coast is proud to be an Equal Opportunity and Affirmative Action employer, and considers qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates. Nearest Major Market: Dothan Sysco Eunola AL

Weld Engineer

Johnson Controls, Inc.