Tandem Wiinch Truck Operator

Archrock Midland , TX 79701

Posted 7 months ago

Overview: After Company certification, operates yard equipment including forklifts, tandem trucks, and other heavy haul equipment to move materials.

Essential Duties:

  • Safely operates facility equipment similar to and including: forklifts, man-lift, winch truck, and semi-truck with lift capacity in excess of 50,000 lbs

  • Safely loads and unloads freight and moves materials to and from the shop and yard using proper equipment and procedures

  • Visually inspects equipment for completion and/or damage and reports issues to manager

  • Performs daily check on equipment and may perform preventative maintenance on assigned equipment

  • Organizes and cleans yard or other areas as required

  • Assists with equipment preparation prior to shipping

Skills and Abilities:

Ability to:

  • Perform all essential duties

  • Safely operate facility equipment

  • Read, write and speak English and /or fully understand daily work instructions (work orders, manuals, etc.)

  • Complete and submit company required documentation in an accurate and timely fashion

Knowledge:

  • Knowledge of Tandem Winch Truck Operation and Forklifts up to 38,000 lbs

  • Knowledge of equipment being operated and being moved

  • Knowledge of safe material handling processes and relevant HSE procedures and regulations

  • Knowledge of inventory and material control processes

Minimum Education and Certification:

  • High school diploma or equivalent preferred

  • Commercial Driver's License (CDL - Class A) and safe driving record

Minimum Experience:

  • Typically at least three years' experience with Tandem Winch Truck Operation and Forklifts up to 38,000 lbs

Leadership:

  • May serve as a resource to others with less experience

Physical Demands: (Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions)

  • Must be fit for duty for the job tasks being performed

  • Must meet the medical requirements necessary to wear PPE required by role

  • Constantly required to display good manual dexterity and to reach with hands and arms

  • Frequently required to talk and hear

  • Frequently required to sit while driving material handling equipment, and to stand and walk with good balance

  • Regularly required to lift, move and carry up to 50 pounds and to push and pull up to 110 pounds

  • Occasionally required to stoop, twist, kneel, and squat

  • Occasionally required to climb, stairs and slanted ladders and carry up to 40 pounds with one hand

  • Vision abilities include close vision, distance vision, color vision, and the ability to adjust focus

icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Mechanic Truck (Midland TX)

Enterprise Products Company

Posted 4 days ago

VIEW JOBS 10/15/2019 12:00:00 AM 2020-01-13T00:00 Make the most of your talents in a fast-paced environment driven by people who strive for achievement. Enjoy corporate strength, stability, and a rewarding career at a growing industry-leading and diverse operating company with a track record for success. Tap into the professional possibilities of Enterprise Products Company. The Truck Mechanic will perform mechanical functions and duties of inspecting, checking, trouble-shooting, repairing, and replacing all mechanical equipment in order to maintain high levels of safe and productive equipment performance. Responsibilities include, but are not limited to: * Complete all records of work performed and comply with Federal, State, and company rules and regulations. * Must be on time, cleanly dressed and available for work at scheduled work shifts or on call periods. * Must supply and maintain defective-free hand tools to perform duties. * Test drive vehicles that have been repaired to ensure all repairs were properly performed. * Inspect and work with brakes as stipulated in Section 396.25 of The Federal Motor Carrier Safety Regulations (FMCSR). * Perform vehicle inspections that meet the qualifications & requirements stipulated in Section 396.19 of the FMCSR. * Perform regulatory required inspections. * Use diagnostic equipment, welding and cutting machines, tire mounting, replacement, and repairing equipment. * Work on all equipment at the terminal level, such as, steam rack equipment, shop equipment, and company cars and pickups. * Maintain all equipment to the highest quality, in a timely manner, while keeping cost at a minimum. * Participate and successfully complete training programs, process safety management reviews, and safety meetings required to comply with state and federal regulations. * Review procedures as necessary to ensure compliance of all company and industry standards to meet all regulatory agency requirements. * Ability to optimize work to effect a minimal amount of overtime. * Perform and assist in scheduling of repairs when the Shop Foreman is unavailable. * Perform remedial and preventative maintenance and maintain facility appearance and safety through good housekeeping practices inside and outside of the facilities. * Participate in available cross training to effectively develop skills in areas specific to other mechanics. * Must use and wear all PPE when required. * Train and guide others to learn duties of Mechanic. The successful candidate will meet the following qualifications: * A minimum of a high school diploma or G.E.D. equivalent is preferred. * Technical certification or equivalent training in a mechanical environment or energy related field is preferred. * A minimum of 3 years mechanic experience in a related field is required. * A valid driver's license with acceptable driving record is required. * Must supply and maintain defective free hand tools to perform duties. * The ability to test drive vehicles that have been repaired to ensure all repairs were properly performed is required. * Ability to read and understand, analyze and interpret documents, equipment repair manuals, reports and federal, state and local codes and regulations. * The ability to perform basic mathematical calculations, such as, percentages, ratios and proportions to practical solutions is required. * Basic computer skills such as: opening, creating and updating content in MS Word documents and Excel spreadsheets is required. * The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business like and professional manner is required. * Takes initiative and is proactive in addressing issues. Quickly and efficiently completes tasks. * The ability to demonstrate conscientiousness, dependability and commitment to the role, team and company. * The ability to work in a fast paced environment with less definition, policy, and bureaucracy. * Works indoors and outdoors in and around industrial and electrical equipment. * Works in temperature extremes due to weather conditions and operating equipment. * Must be able to regularly bend, stoop, move from ground level to higher levels, raise/lift from ground level and lift up to 50 lbs., manually transport a load up to 75 lbs., apply up to 100 foot pounds of torque. * Must wear special safety equipment while working and must be able to lift and put on emergency breathing apparatus and/or protective equipment. * The ability to take call-outs and work overtime is required. * Must live or relocate to within 1 hour of reporting location. Enterprise Products Company Midland TX

Tandem Wiinch Truck Operator

Archrock