Sorry, this job is no longer accepting applications. See below for more jobs that match what you’re looking for!

Supervisory Geneneral Engineer

Expired Job

Department Of Defense Kings Bay , GA 31547

Posted 2 months ago

  • Videos

  • Duties

HelpDuties Summary

You will serve as a Supervisory General Engineer in the Engineering & Planning Department (TRF Code 400) of Trident Refit Facility (TRIREFFAC).

Learn more about this agency

Responsibilities

  • You will serve as the Engineering and Planning Department Deputy Department Head responsible for the engineering support of U.S. Naval submarines.

  • You will be responsible for providing direction and supervision for work performed in subordinate units.

  • You will provide expert professional engineering advice, consultation and guidance in the broad range of engineering support functions provided by the Engineering Department.

  • You will identify, evaluate, and resolve waterfront technical problems through the collection, evaluation, analysis, and dissemination of submarine hull, mechanical, and electrical systems engineering data.

  • You will provide a Local Technical Authority (LTA) approval and/or recommendation on Departures that are prepared by TRIREFFAC, or are submitted by the Fleet, to address non-conformances on systems and/or processes.

Travel Required

Not required

Supervisory status

Yes

Promotion Potential
14

  • Job family (Series)
    0801 General Engineering

  • Requirements

HelpRequirements Conditions of Employment

  • Must be a US Citizen.

  • Must be determined suitable for federal employment.

  • Must participate in the direct deposit pay program.

  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.

  • Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.

  • You will be required to successfully complete a pre-appointment physical examination.

  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following:

  • Experience utilizing the principles and techniques of engineering management in order to investigate unresolved technical issues onboard submarines;

  • Experience interpreting and/or applying specifications, standards and regulations pertaining to design, maintenance, safety or operation of assigned equipment/systems;

  • Experience carrying out effective communication on programmatic waterfront/HM&E systems engineering matters;

  • Experience presenting findings and recommendations in formal engineering reports suitable for internal and external distribution;

  • Experience with the fields of engineering (e.g. naval architecture, marine and mechanical engineering, electrical and electronics engineering, materials engineering, and chemical engineering/chemistry) that pertain to complex submarine maintenance and design in order to analyze problems from an overall system viewpoint.

Additional qualification information can be found from the following Office of Personnel Management website:

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.


See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Safety Engineer II Federal Contracting Group

Mortenson

Posted Yesterday

VIEW JOBS 11/18/2018 12:00:00 AM 2019-02-16T00:00 Overview Mortenson's success is not a matter of luck; it's a result of our ingenuity, expertise, and exceptional people coupled with our unparalleled focus on customer service. Our foundation and culture are based upon our values of trust, safety, teamwork, responsibility, service and stewardship. We are inspired by a compelling purpose to build structures and facilities for the advancement of modern society and a mission to create an exceptional customer experience. Mortenson has built a reputation for being a leader in our industry and in the communities in which we live and work. It all starts with our extraordinary people and collaborative teams. Mortenson has been voted a "best place to work" over 40 times since 2002… …What are you waiting for? The Big Picture: Are you passionate about safety in construction? Are you looking for a position where you can influence behavior and drive positive change? Do you love working with people and inspiring them to do what is right? As a Safety Engineer at Mortenson, you will interact with a variety of people to implement Mortenson's Zero Injury program. You will work at a project site and ensure a safe work environment for team members, subcontractors, and visitors. If you thrive in an ever-changing environment, are flexible, inventive, dedicated and efficient, you'll love working here! ResponsibilitiesWhat will you be doing? In this role, organization, flexibility, extraordinary customer focus and strong communication are critical in performing duties which include, but are not limited to: * Assist project management team in developing and executing site specific safety program and activities * Attend, coordinate, and conduct safety orientation and training programs at the project level * Document and track all safety violations, unsafe conditions, etc. * Conduct work area safety audits * Conduct project's leading and trailing indicator data/document collection and trend analyses * Conduct or assist with major incident analysis * Record, monitor, and analyze Safety, Injury and Hazard statistics * Coordinate OSHA reporting and posting requirements * Review Safety Submittals and attend preconstruction and preparatory meetings with subcontractors * Monitor and review trade partner work plans and activities for safety concerns * Assist with onsite injury management and case management * Monitor Return to Work and Modified duty assignments * Assist with the organization and implementation of project safety celebrations and recognition/reward programs * Participate in and contribute to project planning and hazard analysis Provide resource of safety related information * Evaluate and offer solutions for industrial hygiene concerns * Maintain operational knowledge of construction safety, OSHA, ANSI, and other applicable standards, regulations, laws, and procedures * Serve as resource for safety issues or concerns for all project team members * Attend and/or chair safety meetings Other duties as assigned * Collaborate with client safety personnel, union representatives, insurance risk engineers etc. * Accompany safety, health, insurance and OSHA personnel on work-site tours * Ensure maintenance and inspection of safety equipment and protective wear * Maintain project site Personal Protective Equipment (PPE) and assist the Project Manager with the management of the safety budget allocated for project QualificationsHow do you succeed? * Previous related internship preferred * Detail orientation sufficient to organize and lead multiple project tasks * Ability to work in Microsoft Office and pertinent safety related software programs * Shown positive and professional attitude, and excellent customer service skills * Ability to interpret and communicate Mortenson policies to team members and outside parties * Partnership, initiative, communication, problem-solving, and leadership skills * Effective public speaking and presentation skills * Current driver's license * Due to the nature of the work performed within these facilities, U.S. citizenship is required Education: * Bachelor's degree in safety, occupational health or related field Mortenson is an EOE/Affirmative Action/M/F/Veteran/Disabled employer. Mortenson Kings Bay GA

Supervisory Geneneral Engineer

Expired Job

Department Of Defense