Senior Electrical Hardware Design Engineer

Vetegrity Hanover , MD 21076

Posted Yesterday

Senior Electrical Hardware Design Engineer
An active TS/SCI with a polygraph clearance is required to be considered for this position.
Position Overview:
  • Responsible and accountable for the electrical design technical planning, scheduling, cost analysis, risk analysis and successful execution of small to medium programs or major electrical subsystems of a larger program containing substantial electrical content
  • Leads or makes substantial contribution to electrical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. timing, power, etc.), interface analysis and definition for the design, integration and verification of electrical components, equipment and systems for major programs and projects containing substantial, complex electrical content
  • Plans and leads electrical engineering root cause analysis for complex electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
  • Substantial contribution to the generation and maintenance of electrical work products (i.e. plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers
  • Develops and presents electrical requirements, concepts, designs, decisions and results to internal management, other organizations, team mates and external customers
  • Provides substantial contributions to technical subcontract management that may include Statement of Work (SOW) development, proposal evaluation, source selection, technical oversight, and subcontractor work product evaluation and acceptance
  • Leads design reviews of electrical components, equipment and systems
  • Evaluates vendor capability to support product development
  • Applies a strong understanding of the organizations defined electrical processes throughout the lifecycle of the program or project
  • Participation in the improvement of the organizations electrical processes
  • Supports the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
  • Leads the research and analysis of data, such as a customer design proposal, specifications, and manuals to determine feasibility of design or application
  • Selects components and equipment based on analysis of specifications and reliability
  • Leads small technical proposals and contributes to proposals and may serve as a proposal cost or technical volume lead
  • May function in a project leadership role or supervise lower level employees
  • Exercises considerable latitude in determining technical objectives of assignments
  • Works on diverse range of complex problems requiring ingenuity and creativity without specific direction
  • Guides the successful completion of programs and projects
  • Generally has regular contact with project leads, Program Managers and Senior Managers including external customers
  • Derive requirements, design, build, and test cutting edge devices containing both electrical and optical hardware
  • Troubleshooting and design updates of existing hardware

Minimum Qualifications:
  • Bachelors Degree in Electrical Engineering or a related technical discipline from an accredited College or University
  • 8 years of relevant work experience
  • Strong use and understanding of electrical engineering concepts, principles, processes, and theories
  • Frequently contributes to the development of new theories and methods
  • Aware of business objective and Engineerings role in achieving that objective
  • Strong proficiency in Microsoft Office applications
  • Strong written and verbal communications skills
  • Highly skilled in communicating issues, impacts, and corrective actions
  • Ability to recognize and clearly report information relevant to sound electrical engineering design
  • Manages bill of materials (BOMs), costs and schedules
  • Demonstrated ability to track scope growth
  • Grasps and applies new information quickly
  • Strong ability to handle more complex problems
  • Shows initiative on assignments, exercises strong independent judgment
  • Expert knowledge of lab practices and test of electrical and optical hardware
  • Experience in FPGA design, development, and testing (using Verilog, VHDL or similar)
  • Experience designing digital & analog control circuits for optoelectronic devices including lasers, photodetectors, and modulators.
  • PREFERRED -- Control circuit experience with optical amplifiers, optical splitters, optical attenuators and optical filters
  • Experience in schematic capture and leading a PWB/PCB design through layout, fab and assembly
  • Experience with interface control standards and methods (RS-232, Ethernet, TCP/IP, UDP)
  • Experience specifying and designing RTOS embedded controller PWB/PCBs
  • Experience working on proposals for relevant electrical engineering content
  • PREFERRED -- Embedded software development using real-time operating systems (VxWorks, etc.)
  • PREFERRED -- Knowledge of telecommunications hardware and test equipment

Company Overview:

Vetegrity is an employee-focused small business, founded in 2008. We are dedicated to supporting the missions of the Intelligence Community and the Department of Defense. Vetegrity is a Service Disabled, Veteran-Owned Small Business.
We offer competitive compensation and benefits to include:
  • Medical/Dental/Vision
  • Generous Paid Time Off (PTO) + Federal Holidays
  • 401k with Employer Match
  • Profit Sharing
  • Tuition Reimbursement
  • Flex Spending Account
  • Life Insurance, Long & Short-Term Disability
  • Supplemental Insurance
  • Employee Referral Program
  • Performance Incentives
  • On-The-Spot Rewards
Other company sponsored perks include after-hours events, logo apparel, holiday parties, and more!
If youre interested in learning more about this opportunity and/or Vetegrity, send your resume tocareers@vetegrity.com today!
icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
MidLevel Electrical / Photonics Hardware Design Engineer

General Dynamics Mission Systems

Posted 2 months ago

VIEW JOBS 5/8/2019 12:00:00 AM 2019-08-06T00:00 Basic Qualifications Bachelor's degree in Electrical Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 5 years of relevant experience; or Master's degree plus a minimum of 3 years of relevant experience. CLEARANCE REQUIREMENTS: A current TS/SCI with Polygraph is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. PREFERRED DEGREE TYPES AND EXPERIENCE: * BS in Electrical or Computer Engineering from an accredited major university and eight years of relevant design experience * MS in Electrical or Computer Engineering from an accredited major university and six years of relevant design experience Responsibilities for this Position General Dynamics Mission Systems has an immediate opening for a Mid-level Electrical/Photonics Hardware Design Engineer. This position provides an opportunity to further advance the cutting-edge technology that supports some of our nation's core defense/intelligence services and systems. General Dynamics Mission Systems employees work closely with esteemed customers to develop solutions that allow them to carry out high-stakes national security missions. This position is part of a ~50 person team and will be the primary hardware design engineer at the location. The candidate will need to be able to work independently with minimal oversight. Typical program duties and desired skills include: * Derive requirements, design, build, and test devices containing both electrical and optical hardware * Troubleshooting and design updates of existing hardware * Embedded software development using real-time operating systems (VxWorks, etc.) * FPGA design, development, and testing (using VHDL or similar) * Experience with fiber-optic devices including amplifiers, splitters, attenuators and photo-receivers/transmitters * Experience with interface control standards and methods (TCP/IP, UDP) * Expert knowledge of lab practices, assembly, and test of electrical and optical hardware * PREFERRED -- knowledge of telecommunications hardware and test equipment REPRESENTATIVE DUTIES AND TASKS: * Responsible and accountable for the electrical technical planning, scheduling, cost analysis, risk analysis and successful execution of small to medium programs or major electrical subsystems of a larger program containing substantial electrical content * Substantial contribution to electrical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. timing, power, etc.), interface analysis and definition for the design, integration and verification of electrical components, equipment and systems for major programs and projects containing substantial, complex electrical content * Leads the requirements and functional allocation to electrical units, modules and components * Plans and leads electrical engineering root cause analysis for complex electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues * Substantial contribution to the generation and maintenance of electrical work products (i.e. plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers * Develops and presents electrical requirements, concepts, designs, decisions and results to internal management, other organizations, team mates and external customers * Provides substantial contributions to technical subcontract management that may include SOW development, proposal evaluation, source selection, technical oversight, and subcontractor work product evaluation and acceptance * Leads electrical reviews of electrical components, equipment and systems * Evaluates vendor capability to support product development * Applies a strong understanding of the organizationally defined electrical processes throughout the lifecycle of the program or project * Participation in the improvement of the electrical organizational processes * Supports the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle * Leads the research and analysis of data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application * Selects components and equipment based on analysis of specifications and reliability * Leads small technical proposals and contributes to proposals * May serve as a proposal cost or technical volume manager * May supervise lower level employees * Exercises considerable latitude in determining technical objectives of assignments * Guides the successful completion of programs and projects * Generally works with multiple work groups, including with senior levels of l work groups * Generally works on diverse range of complex problems requiring ingenuity and creativity without appreciable direction * Generally has regular contact with project leaders and Program Managers and Senior Managers including external customers * May function in a project leadership role * Erroneous decisions or recommendations may result in failure to achieve organization objectives KNOWLEDGE SKILLS AND ABILITIES: * Strong use and understanding of electrical engineering concepts, principles, and theories * Frequently contributes to the development of new theories and methods * Strong understanding of electrical engineering processes * Aware of business objective and Engineering role in achieving * Strong proficiency in Microsoft Office applications * Strong written and verbal communications skills * Ability to think creatively * Ability to multi-task * Highly skilled in communicating issues, impacts, and corrective actions * Ability to recognize and clearly report information relevant to sound electrical engineering design * Understands and applies basic project leadership principles including SPI/CPI, Earned Value, Cost Account Management (CAM), and Statistical Process Controls * Demonstrated ability to track scope growth * Grasps and applies new information quickly * Strong ability to handle more complex problems * Shows initiative on assignments, exercises strong independent judgment Company Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 13,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high performance team! General Dynamics is an Equal Opportunity/Affirmative Action Employer that is committed to hiring a diverse and talented workforce. EOE/Disability/Veteran General Dynamics Mission Systems Hanover MD

Senior Electrical Hardware Design Engineer

Vetegrity