SCA Electronics Technician Maintenance II - Avcatt - Ft Drum, NY

General Dynamics Information Technology Fort Drum , NY 13602

Posted 2 months ago

  • Essential Job Functions:

  • Must be able to learn and verify proper functioning of U.S. Army AH64A/D, UH60L, CH47D and OH58D helicopter subsystems and should have a basic understanding of flight aircraft characteristics.

  • Performs flight modules reconfigurations and operational checks prior to scheduled training periods.

  • Supports maintenance and training operations during weekends and shifting hours when required.

  • Dead lifts and repositions reconfigurable aircraft consoles weighing up to 86 lbs. from and to below flight cabin floors.

  • Retrieves aircraft instrumentation panel overlays weighing up to 46 lbs. from above the head and secure the same to mounting frames at below the waist heights.

  • Conducts helmet mounted video display system fittings for basic flight students, allied officers, and VIP's.

  • Interacts with users during training to resolve problems and re-establish the affected module to operational status without delay.

  • Responds to maintenance calls, monitors pilot generated logbook entries, initiates corrective actions, replacement parts requisitions, and related records updates.

  • Conducts and documents general trailer preventive maintenance checks & services.

  • Implements and provides feedback on engineering software and hardware updates.

  • Conducts limited simulator test flights supporting maintenance checks, engineering upgrades, and tests as directed by the Battle Master Controller.

  • Diagnoses, troubleshoots, and repairs electromechanical, video, audio, and network systems using publications and wiring diagrams supplied by military, contractor engineering, and commercial off the shelf equipment manufacturers.

  • Must be able to safely handle rack mounted computers weighing up to 44 lbs. and universal power supplies weighing up to 57 lbs.

  • Crawls through limited access spaces as part of periodic inspections, services, maintenance, and engineering changes.

  • Must be able to safely handle flight controls assemblies weighing approximately 100 pounds dead lift weight. Performs MIL STD 2000 soldering as required.

  • Employs use of complex electronic equipment such as, digital multi-meter, fiber optic test equipment, temperature probes, ultrasonic beacons test equipment, computer based troubleshooting systems, power meters, CAT5 and CAT6 network cabling testing.

  • Maintains and repairs as needed high voltage cabling in the 300 amps range.

  • Troubleshoots and replace analog to digital to analog networked circuit module arrays.

  • Maintains logistics records, LAN based central work order system, and reports as directed by the site manager.

  • Ships and receives parts following strict US Government property accountability procedures.

  • Performs basic inspections, preventive services on four environmental control units, and determines if on call subcontractor maintenance is required.

  • At the discretion of the site manager, additional duties may include support responsibilities not directly associated with primary duties. Must be ready to travel with the AVCATT suite if relocated.

  • Applies technical knowledge of electronics principles in determining equipment malfunctions.

  • Applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode.

Basic Qualifications:

  • Associate's Degree in Electronic Technology (or equivalent) from an accredited college or university and three years minimum work experience in a related discipline or three years related military training or a combination of education and experience.

  • Three years of increasingly complex and progressive experience in computer systems / network or training device maintenance.

  • Two years' experience with Microsoft office software operation and use.

  • Must possess good written composition and verbal communication skills, ability to express facts and rationale.

  • Must currently possess at a minimum an Interim security clearance and be able to obtain/maintain an active/valid US security clearance.

  • Must be able to stoop, bend, lift and carry up to 50 lbs.

  • Must be able to climb stairs on a daily basis.

Work Environment:

  • Varies depending on site

  • Must be able to travel to various locations.

For more than 50 years, General Dynamics Information Technology has served as a trusted provider of information technology, systems engineering, training, and professional services to customers across federal, state, and local governments, and in the commercial sector. Over 40,000 GDIT professionals deliver enterprise solutions, manage mission-critical IT programs, and provide mission support services worldwide. GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Post date: October 26, 2018

Location

  • Thoroughfare (i.e. Street address):

Fort Drum , NY

United States

Location

  • Thoroughfare (i.e. Street address):

SCA Electronics Technician Maintenance II - AVCATT - Ft Drum, NY

CSRA

October 26, 2018

  • Essential Job Functions:

  • Must be able to learn and verify proper functioning of U.S. Army AH64A/D, UH60L, CH47D and OH58D helicopter subsystems and should have a basic understanding of flight aircraft characteristics.

  • Performs flight modules reconfigurations and operational checks prior to scheduled training periods.

  • Supports maintenance and training operations during weekends and shifting hours when required.

  • Dead lifts and repositions reconfigurable aircraft consoles weighing up to 86 lbs. from and to below flight cabin floors.

  • Retrieves aircraft instrumentation panel overlays weighing up to 46 lbs. from above the head and secure the same to mounting frames at below the waist heights.

  • Conducts helmet mounted video display system fittings for basic flight students, allied officers, and VIP's.

  • Interacts with users during training to resolve problems and re-establish the affected module to operational status without delay.

  • Responds to maintenance calls, monitors pilot generated logbook entries, initiates corrective actions, replacement parts requisitions, and related records updates.

  • Conducts and documents general trailer preventive maintenance checks & services.

  • Implements and provides feedback on engineering software and hardware updates.

  • Conducts limited simulator test flights supporting maintenance checks, engineering upgrades, and tests as directed by the Battle Master Controller.

  • Diagnoses, troubleshoots, and repairs electromechanical, video, audio, and network systems using publications and wiring diagrams supplied by military, contractor engineering, and commercial off the shelf equipment manufacturers.

  • Must be able to safely handle rack mounted computers weighing up to 44 lbs. and universal power supplies weighing up to 57 lbs.

  • Crawls through limited access spaces as part of periodic inspections, services, maintenance, and engineering changes.

  • Must be able to safely handle flight controls assemblies weighing approximately 100 pounds dead lift weight. Performs MIL STD 2000 soldering as required.

  • Employs use of complex electronic equipment such as, digital multi-meter, fiber optic test equipment, temperature probes, ultrasonic beacons test equipment, computer based troubleshooting systems, power meters, CAT5 and CAT6 network cabling testing.

  • Maintains and repairs as needed high voltage cabling in the 300 amps range.

  • Troubleshoots and replace analog to digital to analog networked circuit module arrays.

  • Maintains logistics records, LAN based central work order system, and reports as directed by the site manager.

  • Ships and receives parts following strict US Government property accountability procedures.

  • Performs basic inspections, preventive services on four environmental control units, and determines if on call subcontractor maintenance is required.

  • At the discretion of the site manager, additional duties may include support responsibilities not directly associated with primary duties. Must be ready to travel with the AVCATT suite if relocated.

  • Applies technical knowledge of electronics principles in determining equipment malfunctions.

  • Applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode.

Basic Qualifications:

  • Associate's Degree in Electronic Technology (or equivalent) from an accredited college or university and three years minimum work experience in a related discipline or three years related military training or a combination of education and experience.

  • Three years of increasingly complex and progressive experience in computer systems / network or training device maintenance.

  • Two years' experience with Microsoft office software operation and use.

  • Must possess good written composition and verbal communication skills, ability to express facts and rationale.

  • Must currently possess at a minimum an Interim security clearance and be able to obtain/maintain an active/valid US security clearance.

  • Must be able to stoop, bend, lift and carry up to 50 lbs.

  • Must be able to climb stairs on a daily basis.

Work Environment:

  • Varies depending on site

  • Must be able to travel to various locations.

Fort Drum , NY

United States


See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
SCA Electronics Technician Maintenance II Avcatt Ft Drum NY

Csra Inc.

Posted 2 months ago

VIEW JOBS 10/27/2018 12:00:00 AM 2019-01-25T00:00 Primary Location Fort Drum , NY United States Job Requisition RQ28443 Category SCA Apply Legacy CSRA employee login * Essential Job Functions: * Must be able to learn and verify proper functioning of U.S. Army AH64A/D, UH60L, CH47D and OH58D helicopter subsystems and should have a basic understanding of flight aircraft characteristics. * Performs flight modules reconfigurations and operational checks prior to scheduled training periods. * Supports maintenance and training operations during weekends and shifting hours when required. * Dead lifts and repositions reconfigurable aircraft consoles weighing up to 86 lbs. from and to below flight cabin floors. * Retrieves aircraft instrumentation panel overlays weighing up to 46 lbs. from above the head and secure the same to mounting frames at below the waist heights. * Conducts helmet mounted video display system fittings for basic flight students, allied officers, and VIP's. * Interacts with users during training to resolve problems and re-establish the affected module to operational status without delay. * Responds to maintenance calls, monitors pilot generated logbook entries, initiates corrective actions, replacement parts requisitions, and related records updates. * Conducts and documents general trailer preventive maintenance checks & services. * Implements and provides feedback on engineering software and hardware updates. * Conducts limited simulator test flights supporting maintenance checks, engineering upgrades, and tests as directed by the Battle Master Controller. * Diagnoses, troubleshoots, and repairs electromechanical, video, audio, and network systems using publications and wiring diagrams supplied by military, contractor engineering, and commercial off the shelf equipment manufacturers. * Must be able to safely handle rack mounted computers weighing up to 44 lbs. and universal power supplies weighing up to 57 lbs. * Crawls through limited access spaces as part of periodic inspections, services, maintenance, and engineering changes. * Must be able to safely handle flight controls assemblies weighing approximately 100 pounds dead lift weight. Performs MIL STD 2000 soldering as required. * Employs use of complex electronic equipment such as, digital multi-meter, fiber optic test equipment, temperature probes, ultrasonic beacons test equipment, computer based troubleshooting systems, power meters, CAT5 and CAT6 network cabling testing. * Maintains and repairs as needed high voltage cabling in the 300 amps range. * Troubleshoots and replace analog to digital to analog networked circuit module arrays. * Maintains logistics records, LAN based central work order system, and reports as directed by the site manager. * Ships and receives parts following strict US Government property accountability procedures. * Performs basic inspections, preventive services on four environmental control units, and determines if on call subcontractor maintenance is required. * At the discretion of the site manager, additional duties may include support responsibilities not directly associated with primary duties. Must be ready to travel with the AVCATT suite if relocated. * Applies technical knowledge of electronics principles in determining equipment malfunctions. * Applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode. Basic Qualifications: * Associate's Degree in Electronic Technology (or equivalent) from an accredited college or university and three years minimum work experience in a related discipline or three years related military training or a combination of education and experience. * Three years of increasingly complex and progressive experience in computer systems / network or training device maintenance. * Two years' experience with Microsoft office software operation and use. * Must possess good written composition and verbal communication skills, ability to express facts and rationale. * Must currently possess at a minimum an Interim security clearance and be able to obtain/maintain an active/valid US security clearance. * Must be able to stoop, bend, lift and carry up to 50 lbs. * Must be able to climb stairs on a daily basis. Work Environment: * Varies depending on site * Must be able to travel to various locations. For more than 50 years, General Dynamics Information Technology has served as a trusted provider of information technology, systems engineering, training, and professional services to customers across federal, state, and local governments, and in the commercial sector. Over 40,000 GDIT professionals deliver enterprise solutions, manage mission-critical IT programs, and provide mission support services worldwide. GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class. Post date: October 26, 2018 Location - Thoroughfare (i.e. Street address): Fort Drum , NY United States Location - Thoroughfare (i.e. Street address): SCA Electronics Technician Maintenance II - AVCATT - Ft Drum, NY CSRA October 26, 2018 * Essential Job Functions: * Must be able to learn and verify proper functioning of U.S. Army AH64A/D, UH60L, CH47D and OH58D helicopter subsystems and should have a basic understanding of flight aircraft characteristics. * Performs flight modules reconfigurations and operational checks prior to scheduled training periods. * Supports maintenance and training operations during weekends and shifting hours when required. * Dead lifts and repositions reconfigurable aircraft consoles weighing up to 86 lbs. from and to below flight cabin floors. * Retrieves aircraft instrumentation panel overlays weighing up to 46 lbs. from above the head and secure the same to mounting frames at below the waist heights. * Conducts helmet mounted video display system fittings for basic flight students, allied officers, and VIP's. * Interacts with users during training to resolve problems and re-establish the affected module to operational status without delay. * Responds to maintenance calls, monitors pilot generated logbook entries, initiates corrective actions, replacement parts requisitions, and related records updates. * Conducts and documents general trailer preventive maintenance checks & services. * Implements and provides feedback on engineering software and hardware updates. * Conducts limited simulator test flights supporting maintenance checks, engineering upgrades, and tests as directed by the Battle Master Controller. * Diagnoses, troubleshoots, and repairs electromechanical, video, audio, and network systems using publications and wiring diagrams supplied by military, contractor engineering, and commercial off the shelf equipment manufacturers. * Must be able to safely handle rack mounted computers weighing up to 44 lbs. and universal power supplies weighing up to 57 lbs. * Crawls through limited access spaces as part of periodic inspections, services, maintenance, and engineering changes. * Must be able to safely handle flight controls assemblies weighing approximately 100 pounds dead lift weight. Performs MIL STD 2000 soldering as required. * Employs use of complex electronic equipment such as, digital multi-meter, fiber optic test equipment, temperature probes, ultrasonic beacons test equipment, computer based troubleshooting systems, power meters, CAT5 and CAT6 network cabling testing. * Maintains and repairs as needed high voltage cabling in the 300 amps range. * Troubleshoots and replace analog to digital to analog networked circuit module arrays. * Maintains logistics records, LAN based central work order system, and reports as directed by the site manager. * Ships and receives parts following strict US Government property accountability procedures. * Performs basic inspections, preventive services on four environmental control units, and determines if on call subcontractor maintenance is required. * At the discretion of the site manager, additional duties may include support responsibilities not directly associated with primary duties. Must be ready to travel with the AVCATT suite if relocated. * Applies technical knowledge of electronics principles in determining equipment malfunctions. * Applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode. Basic Qualifications: * Associate's Degree in Electronic Technology (or equivalent) from an accredited college or university and three years minimum work experience in a related discipline or three years related military training or a combination of education and experience. * Three years of increasingly complex and progressive experience in computer systems / network or training device maintenance. * Two years' experience with Microsoft office software operation and use. * Must possess good written composition and verbal communication skills, ability to express facts and rationale. * Must currently possess at a minimum an Interim security clearance and be able to obtain/maintain an active/valid US security clearance. * Must be able to stoop, bend, lift and carry up to 50 lbs. * Must be able to climb stairs on a daily basis. Work Environment: * Varies depending on site * Must be able to travel to various locations. Fort Drum , NY United States * Csra Inc. Fort Drum NY

SCA Electronics Technician Maintenance II - Avcatt - Ft Drum, NY

General Dynamics Information Technology