Procurement Value Engineer

BD (Becton, Dickinson And Company) San Diego , CA 92140

Posted 3 months ago

Job Description: Summary

The Procurement Value Engineer will be responsible for driving Value Analysis / Value Engineering (VAVE) efforts to identify, assess and capture product design or refreshes and manufacturing process efficiencies using a cost modelling tool. They will support / deploy VAVE efforts to identify and achieve significant cost reductions and performance improvement for the business.

Job Description


  • Provides technical support to Procurement, R & D and the various engineering stakeholders in project execution (35%)
  • Works with functional and stakeholder leadership to inform / set / deliver against yearly cost and performance improvement targets to achieve business goals(30%)
  • Consults with project management, product development, sourcing and operations colleagues to develop and maintain a pipeline of improvement opportunities (25%)
  • Successfully completes phase-gate reviews and other documentation as needed. Prepares and presents project status summaries at reviews. (10%)
  • May perform other duties as required


  • General office environment, computer use

  • Potential Long-distance or air travel as needed (to/from East coast USA, or to/from Europe).

  • Requires occational availability during non-standard business hours to collaborate with global team members via Skype or other remote collaboration platforms.

  • Must be available for extended, varied work hours based on business need

Scope of Responsibility:

  • Responsible for three primary locations: San Diego, CA; San Jose, CA; Tempe, AZ

  • Collaborates / influences to improve and design new products and/or new methods to produce existing products and services that improves the company's market position (can be through margin improvement, differentiation of offering, increased reliability, etc.).

  • Assesses processes and practices for improvement opportunities and supports continuous improvement initiatives to ensure high quality, compliance and gains in organizational efficiency

Sphere of Influence:

  • The Procurement Value Engineer will work on a wide range of global projects that are related to (but not limited to): product design optimization for value, changing material specifications, changing suppliers, validating new suppliers, changing supply chain purchasing points (i.e., insourcing, outsourcing, moving to or from distributors, etc.). Each of these projects will typically impact multiple sites and successful realization of the results is required in order to achieve the value requirements of the company.

Example of team(s) membership/leadership

  • Participates as a member of the Procurement Operations Team

  • Participates as a member of numerous product development, improvement and platform teams collaborating and influencing numerous engineering, operations, R&D and market stakeholders

  • Potential for extensive supplier contact; applicable professional bodies

Impact on Business Results

  • The Procurement Value Engineer is accountable for contributing engineering, manufacturing process, cost modelling expertise and project management acumen to the performance improvement of the company's products and services.

Impact on quality:

  • The projects led and supported by the Procurement Value Engineer will directly impact the quality of BD products.

Financial Impact:

  • The Procurement Value Engineer will support teams making substantial improvements to the gross margin of company products and services as well as improved quality and reliability that will reduce warranty and recall exposure. DTV capability will support innovation and revenue growth while optimizing margins.

  • The Procurement Value Engineer will support teams making substantial improvements to the gross margin of company products and services (impact of revenue and COGS).

Minimum Requirements:


  • Working knowledge of Value Analysis/Value Engineering principles and methodologies

  • Proficient in the design and manufacturing processes of mechanical and electromechanical products, mechanisms, assemblies

  • Strong engineering analysis skills particularly in the areas of statics and strength of materials

  • Strong engineering and manufacturing operations knowledge in 4 key areas: electromechanical, injection molding, electronics including PCBAs, metals including die casting and stamping

  • CAD design proficiency, preferably with SolidWorks or equivalent

  • Finite Element Analysis experience a plus

  • Project management skills including basic use of MS Project

  • Excellent interpersonal, oral presentation and written communication skills; professional presence and behavior

  • Expertise in project management, design for manufacturing and design for assembly

  • Demonstrated general understanding of computer-aided design (CAD) tools

  • Substantial hands-on experience producing high-value measurable results on complex projects

  • Broad expertise in engineering calculations and analysis, geometric dimensioning and tolerancing, and datum structure development

  • Research new resins, tooling standards, molding processes, automation techniques, measurement practices, and market trends in accordance with strategic initiatives

  • Implement cost savings strategies using methods such as resin conversion, cycle time reduction, increasing press utilization, extending preventative maintenance intervals, packaging optimization, colorant reduction, etc.

  • Maintain and continuously improve tooling standards. This includes testing and analysis of new steel types and coatings/treatments to extend mold component life or preventative maintenance intervals

  • Track and report long-term tooling asset studies for customers using programs such as Tool Life Management

  • Investigate potential tooling issues to identify and confirm root cause, and to implement corrective action

  • Provide additional support for external mold repairs

  • Complete measurement studies and data analysis to aid in the qualification of new or existing molds

  • Investigate potential tooling issues to identify and confirm root cause, and to implement corrective action

  • Capable of successfully managing projects and working with teams across geographies

  • Recognized as technical or subject matter expert in value engineering and analysis, DTV methodologies

  • Seeks, analyzes and proposes opportunities for improvement (cost, cycle time, quality, etc.) that are complex. Analyzes feasibility and participates in or leads development, execution, or monitoring of implementation plans

  • Able to challenge the status quo and champion new initiatives

  • Acts as a catalyst for change, engages others, and manages implementation effectively

  • Able to build consensus, support colleagues, set a tone of collaboration within teams, resolve issues among associates

  • Able to develop, articulate and act upon a strategic vision

  • Serves as a model to others through their high level of credibility, strong work ethic, and recognized ability to complete high quality deliverables in a timely manner

  • Easily adapts to change and performs well under pressure

  • Strong organizational planning, and understanding of portfolio management concepts

  • Ability to work well in a fast-paced collaborative team environment within a rapidly evolving business environment

  • Penchant for an environment rich in constant change and conflicting requirements

  • Highly creative, comfortable with ambiguity, interested in big challenges

  • Outcomes and data focused. Ability to leverage data to define key outcomes and navigate varying opinions to gain support for the most compelling approach and narrative.

  • High capacity to collaborate across matrixed teams, as well as the ability to exert influence

  • Expertise in relationship building, from peers to senior management; great customer service style

  • Comfortable operating on both strategic and tactical levels

  • Able to lead and influence others in support of company objectives

  • Collaborates with stakeholders for cross-group buy-in and implementation alignment and to create an integrated plan and view for the greatest impact

  • Leads cross-group integration efforts to align group stakeholders around collaborative implementation and success metrics

  • Strong evidence of influencing thought leaders to propel a platform or initiative forward

  • Understands and can lead comprehensive change management methodologies


  • Demonstrated skill and experience in problem solving (root cause analysis)

  • Excellent cross-functional collaboration skills, particularly with distributed teams

  • Skilled at solving multi-dimensional problems with both quantitative and qualitative variables

  • Strong presentation skills and the ability to speak articulately across all levels of the company

  • Exceptional writing and communications skills. You will have accountability for the story and ensure all spokespeople are aligning to and amplifying the core messages.

  • Excellent problem solving, decision making and cross functional team building skills

  • Highly efficient with MS Office applications

  • Preferred proficiency with MS-Project


  • Bachelor's degree in Mechanical, Electrical Engineering or related field with 3+ years of experience in a product development and manufacturing organization, preferably in a mechanical design engineering role; or an equivalent combination of education and experience

  • 3+ years of experience in a product development and manufacturing organization

  • 3+ years of experience in mechanical product design and continuous improvement

  • Experience with cost reduction projects

  • Finite Element Analysis experience preferred

  • Ability to travel up to 25% (prodominantly domestic with potential for some international travel to Europe)

  • Must have current passport or ability to obtain a passport. Must be able to travel to/from the US.

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status.

Primary Work Location

USA CA - San Diego Bldg A&B

Additional Locations

Work Shift

icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Procurement Anst II

BAE Systems

Posted Yesterday

VIEW JOBS 1/22/2020 12:00:00 AM 2020-04-21T00:00 BAE Systems is seeking a well-versed Experienced Buyer to support Production and Depot Repair operations for our Automated Test Systems Products which is part of our C4ISR Systems Business Areas located in San Diego, California. This position will reside in San Diego, CA. The ideal candidate will have significant experience sourcing a variety of components, including electronics such as microcircuits and semiconductors as well as custom build to print parts in a rapidly changing, quick turn environment. This position requires a high level of interaction with Program Office, engineering teams and operations while following required Procurement Policies and Procedures. This role is part of a team of Procurement Analysts who do the planning and buying of various commodities to support the production of Avionic Test Equipment, the candidate will be responsible for procuring their assigned commodities as well as helping the rest of the team as time permits. The candidate is expected to be able to work independently as well as with others to exercise business judgment to execute a comprehensive purchasing strategy resulting in superior cost, quality, and availability performance. BAE Systems San Diego CA

Procurement Value Engineer

BD (Becton, Dickinson And Company)