Principal Systems Engineer (On-Site Or Hybrid)

BAE Systems Plc Sterling Heights , MI 48313

Posted 1 week ago

Job Description What's it like realizing your potential at an innovative company that takes on some of the world's most important challenges? Rewarding. As part of our Systems Engineering team, you'll join a diverse group of driven professionals who design the products and systems that support enhanced military capabilities, protect national security, and keep critical information and infrastructure secure. With us, you'll be able to make an impact while you hone your skills and grow in your career.

We are currently looking for an experienced Model-Based Systems Engineer to support our Combat Vehicle and Naval Guns International Product Lines and assume a lead role. This role can be on-site or hybrid on-site (50% or more on-site), and will be on a 9/80 schedule with every other Friday off. Preferred locations are Sterling Heights, MI; San Jose, CA; Minneapolis, MN; Phoenix, AZ; and York, PA.

As a Principal Systems Engineer, you will:

  • Lead or support systems engineering tasks such as requirements development and management, architecture development, interface development, formal decisions and trade studies, and system design development, specialty engineering integration, and verification and validation.

  • Lead and facilitate architecture development in Systems Modeling Language (SysML) model of assigned system, subsystems, and components.

  • Lead or support the product structure and the system architectural models from early vehicle concept through detailed design, integration, and test phases,

  • Support requirements decomposition analysis to help drive concept architectures and system characteristics. Support compliance assessments.

  • Lead development and maintenance of interface requirements and interface design information for assigned sub-system, system and components in SysML model.

  • Document concept design decisions and support generating System/Subsystem Design Descriptions (SSDDs) and capability assessments in SysML model.

  • Coordinate and facilitate formal decisions and trade studies to drive design and document results.

  • Develop and manage subsystem and component level performance specifications by managing requirements in a SysML model or requirements repository.

  • Create and maintain requirements traceability in the SysML model or requirements repository.

  • Develop and maintain requirements verification and compliance, and supporting artifacts.

  • Provide Systems Engineering input to support vehicle level Systems Engineering activities and program milestone reviews.

  • Support the execution and monitoring of cost, schedule, risk, and Contract Data Requirement List (CDRL) delivery.

  • Coordinate Systems Engineering (SE) activities within assigned team IPTs and Specialty Engineering POCs to help influence the design.

Here is a video to give you an idea about the work we do.Required Education, Experience, & Skills

  • Bachelor's degree in engineering or closely related field and 4+ year's relevant experience is required.

  • Experience in Model Based Systems Engineering (MBSE), including SysML methodology and tools like Cameo.

  • Systems engineering experience performing requirements analysis, derivation and allocation, and translating requirements to viable concepts design solutions within applicable constraints.

  • Experience developing architecture concepts and evaluating alternatives.

  • Ability to balance system design considering system usage concept of operations (CONOPS), performance, constraints, and logistics concerns

  • Ability to plan, conduct and document complex trade studies.

  • Ability to generate System/Subsystem Design Descriptions (SSDDs) and capability assessments per the program statement of work (SOW).

  • Excellent oral and written communication skills.

Preferred Education, Experience, & Skills

  • Bachelor's degree in Aerospace Engineering or Electrical Engineering with a Master's degree in Systems Engineering.

  • Experience with military vehicle systems.

  • Logical architecture experience, including development of use cases.

  • Familiarity with Department of Defense Architecture (DoDAF).

  • Experience with DOORS requirements management tool.

  • Have and maintain INCOSE Certified Systems Engineering Professional (CSEP) certification.

  • Leadership and mentoring of younger engineers.

About BAE Systems Platforms & Services The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repairjust to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too.We celebrate the array of skills, experiences, and perspectives our employees bring to the table. For us, differences are a source of strength. We're laser-focused on high performance, and we work hard every day to nurture an inclusive culture where all employees can innovate and thrive. Here, you will not only build your career, but you will also enjoy work-life balance, uncover new experiences, and collaborate with passionate colleagues.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Senior Systems Design Engineer

General Dynamics

Posted 5 days ago

VIEW JOBS 11/24/2022 12:00:00 AM 2023-02-22T00:00 <p>Responsibilities for this Position</p><p>Requisition Number: 9929</p><p>Location: Sterling Heights Complex (LSHC)</p><p>Position Type: Full-Time Regular</p><p>Education Required: Bachelors Degree</p><p>Relocation Provided: No</p><p>Experience Required: More than 10 years</p><p>Department: APT Vetronics SW &amp; Lethality</p><ul><li>L9663 (Direct)</li></ul><p>Position Description:</p><p>General Dynamics Land Systems Offers:</p><ul><li><p>Robust Total Rewards program, including: competitive base pay, incentive pay that rewards individual and team performance, and comprehensive benefits.</p></li><li><p>401k Match (6%)</p></li><li><p>Tuition Assistance</p></li><li><p>9-80 Work Schedule (This position's standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off.)</p></li><li><p>On-going learning opportunities within a diverse, inclusive and rewarding work environment</p></li><li><p>Hybrid Work Location (position dependent)</p></li><li><p>Onsite Cafeteria, Remodeled with new equipment Fitness Center, and Outdoor fitness track</p></li></ul><p>General Dynamics is looking to hire a highly-motivated, best-in-class Hardware-in-the-Loop (HIL) System Design Engineer. This position will be responsible for the development, integration, and maintenance of HIL test systems, which shall include, but not be limited to, the following capabilities:</p><ul><li><p>Simulation of synthetic driving environments (e.g., terrain, weather, lighting, position, obstacles, etc.)</p></li><li><p>Real-time physics-based plant simulation</p></li><li><p>Signal conditioning and fault injection</p></li><li><p>Test automation executive</p></li><li><p>DAQ for CAN, Ethernet, 1553, RS-422, SSI, discrete analog, discrete digital, and other signal types</p></li><li><p>Support for various 3 rd -party tools</p></li></ul><p>Applicants should have the following skillset:</p><ul><li><p>Electrical / Electronic Engineering:</p></li><li><p>DIGITAL CIRCUIT DESIGN: Digital signal conditioning; encoders; counters; sinking I/O; sourcing I/O; impedance matching; A/D; D/A; digital filters (IIR, LP, HP, BP, ...); control logic; power; optical and galvanic isolation</p></li><li><p>ANALOG CIRCUIT DESIGN: Analog signal conditioning, analog filter design (LP, HP, BP, ...), filter response, Nyquist sampling theory, aliasing, mitigation, resolver circuits, LVDT circuits, thermocouple circuits</p></li><li><p>SERIAL INTERFACE DESIGN: RS232, RS422/485, CAN, MIL-Std-1553B, Ethernet, SSI, SPI, I2C, transceivers</p></li><li><p>FPGA DESIGN: Sensor emulation, digital filters, serial devices, high speed logic control</p></li><li><p>MICRO-CONTROLLERS: Design custom micro-controller applications</p></li><li><p>AC/DC POWER: AC And DC power circuits; circuit protection; 3VDC, 5VDC, 28VDC, 120VAC; 240VAC - knowledge of working with high voltage</p></li><li><p>SIGNAL ANAYSIS: Frequency and duty cycle generation and measurement; Fast Fourier Frequency analysis; noise analysis; filter types and filter performance</p></li><li><p>Cable / Harness Design:</p></li><li><p>CABLE DESIGN KNOWLEDGE / CALCULATIONS: Wire types, stranding, usage, insulation, frequency characteristics, sizing, current, voltage, power, thermal, propagation delays, physical strength, fill, weight</p></li><li><p>CABLE SHIELDING, GROUNDING, EMI DESIGN: Shielding, grounding, terminating, EMI</p></li><li><p>CABLE MIL CONNECTOR KNOWLEDGE: Military connector knowledge - receptacles, plugs, materials, contacts, keying, clocking</p></li><li><p>CABLE FABRICATION KNOWLEDGE: Soldering, crimping, strain reliefs, boots, boot adapters, shrink</p></li><li><p>CABLE SIGNAL ANAYSIS KNOWLEDGE: Signal analysis</p></li></ul><ul><li>R/L/C effects; noise analysis - filtering; length - propagation delays; trunk lengths; stub lengths</li></ul><ul><li><p>Electrical drawings:</p></li><li><p>ELECTRICAL SINGLE LINE: Design electrical single line diagrams</p></li><li><p>ELECTRICAL LAYOUT: Design electrical layout drawings</p></li><li><p>ELECTRICAL CABLE: Design electrical cable drawings</p></li><li><p>ELECTRICAL SCHEMATICS: Design electrical schematics</p></li><li><p>Networks:</p></li><li><p>ETHERNET NETWORKS: Switches; hubs; network topologies; analysis methods and tools</p></li><li><p>CAN BUS NETWORKS: CAN bus design; communication; analysis methods and tools</p></li><li><p>SERIAL NETWORKS: MIL-STD-1553B; RS232; RS422/485; SPI; I2C; SSI - analysis methods and tolls</p></li><li><p>VIDEO: RS170; SDI; HDMI; DVI; VGA - analysis methods and tools</p></li><li><p>TIME-SENSITIVE NETWORKING: Switches; time reservation; CUC / CNC; analysis methods and tools</p></li><li><p>Military Vehicle Knowledge:</p></li><li><p>MILITARY VEHICLE POWER: Power (common) - knowledge of military vehicle power systems and how to integrate and test</p></li><li><p>MILITARY VEHICLE MOBILITY: Mobility - knowledge of military vehicle power systems and how to integrate and test</p></li><li><p>MILITARY VEHICLE SURVIVABILITY: Survivability - knowledge of military vehicle power systems and how to integrate and test</p></li><li><p>MILITARY VEHICLE LETHALITY: Lethality - knowledge of military vehicle power systems and how to integrate and test</p></li><li><p>Misc.:</p></li><li><p>Be able to multi-task on simultaneous development projects, ensuring adherence to budget, schedule, and mission scope</p></li><li><p>Have exceptional customer service and communication skills, and be helpful and calm under pressure</p></li><li><p>Have a proactive attitude and enjoy working in a fast-paced environment where the toolset is continuously evolving</p></li></ul><p>Applicant should have familiarity with the following tools:</p><ul><li>SPICE, MATLAB/SIMULINK</li><li>SPICE, MATLAB/SIMULINK, EXCEL</li><li>SPICE, EXCEL</li><li>NI LABVIEW, NI VERISTAND, XILINX VIVADO</li><li>SPICE, EXCEL</li><li>SPICE, EXCEL</li><li>SPICE, EXCEL</li><li>EXCEL, MATLAB/SIMULINK, SPICE</li><li>VISIO, MENTOR, OTHER</li><li>WIRESHARK</li><li>VECTOR CANOE, LABVIEW</li><li>PROTOCOL MONITORS &amp; CONVERTORS - MOXA</li></ul><p>Position Requirements:</p><ul><li><p>BS in Electrical Engineering required with a minor in Computer Science or Computer Engineering (preferred)</p></li><li><p>Proven 10+ record of participation in full life cycle software design for military, civil avionics systems, or automotive systems</p></li><li><p>Experience with embedded electronics architecture in military, automotive, or avionics applications</p></li><li><p>Experience testing embedded software</p></li><li><p>Experience developing test applications in NI Veristand, Vector CANoe, Simulink, NI TestStand, or equivalent technology</p></li><li><p>Experience using Wireshark</p></li><li><p>Experience with reading and understanding electrical schematics</p></li><li><p>Working knowledge of HIL, signal conditioning, simulation, and data acquisition</p></li><li><p>Familiarity with standards such as PCAP, PTP, and PRP</p></li><li><p>Working knowledge of industry safety standards and regulations including, but not limited to, MIL-STD-882E, ISO 26262, FACE</p></li><li><p>Experience in military practices for Safety Design and Assessment per MIL-STD-882E</p></li><li><p>Design knowledge of embedded operating systems including RTOS and partitioned OS environments</p></li><li><p>Experience in high bandwidth data buses and network technology (e.g. AFDX, PCI Express, Ethernet, TSN)</p></li><li><p>Model base design methods (e.g. UML)</p></li><li><p>Strong written and verbal communication skills</p></li><li><p>US Citizenship required</p></li></ul><p>General Dynamics is a successful Fortune 100, global aerospace and defense company, with over 90,000 employees world-wide. General Dynamics Land Systems, a business unit of General Dynamics, has a strong foundation of delivering core engineering and manufacturing capabilities to our clients for military vehicles. Our team is focused on continuous process and productivity improvements that reduce product costs, while increasing troop safety and effectiveness. Land Systems continues to work with the US Armed Forces and its Allies to ensure these vehicles remain survivable, relevant, flexible, affordable and capable of addressing a dynamic threat environment. General Dynamics Lands Systems provides a competitive compensation package, site specific flexible work schedules, 401(k) with Company Match; Bonus Eligibility, Employee Development Opportunities, Tuition Reimbursement, On-site Amenities, and comprehensive Medical/Dental/Vision Insurance. At GDLS, we strive to be champions who drive diversity, equity and inclusion. We are committed to our values and beliefs to provide a safe space, which empowers our team members to bring their full, authentic selves to work. We welcome all diverse backgrounds and experiences, as we see the value in creating a dynamic environment of diverse culture preference. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. General Dynamics Land Systems is committed to working with and providing accommodations to individuals with a disability. Candidates who require a reasonable accommodation due to disability for any part of the application or hiring process may contact benefits@gdls.com for assistance. Determination of requests for reasonable accommodation are made on a case-by-case basis.</p><br> General Dynamics Sterling Heights MI

Principal Systems Engineer (On-Site Or Hybrid)

BAE Systems Plc