Ordnance Equipment Mechanic

Department Of Defense Fort Sill , OK 73503

Posted 3 days ago

  • Duties

Help Duties Summary

This is an Air Reserve Technician (ART) Enlisted position.

This is a Drug testing position

Air Reserve Technicians are part of the regular civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain active membership in an Air Force Reserve unit so long as they occupy Air Reserve Technician positions. As members of reserve units, ARTs receive on average one weekend of military training per month. In addition, they are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members are subject to immediate call to active duty in mobilization to meet a national emergency.

Retired military are usually ineligible for membership in the Air Force Reserve. Retired military personnel who have active Air Force Reserve assignments may apply provided they show assignment (position and unit) on their application.

This is a standing register used to fill position at AFRC locations as vacancies occur. Some positions may have promotion potential to a higher grade than the grade being filled. Multiple vacancies may be filled from this announcement. The beginning and ending salaries may vary depending on location of position.

The cut-off date for these positions is the 25th of each month. Therefore, if we receive your application by midnight on the 25th of the month, you are eligible to go on the register the following month.

Some positions covered may or may not be obligated. Therefore, the selectee may be displaced by reassignment or reduction in force procedures at a later time should the previous incumbent exercise his/her reemployment rights.

The Government's most important asset is its people.

Learn more about this agency

Responsibilities

The primary purpose of this position is to serve as Air Reserve Technician (ART) ordnance mechanic and to perform both on and off ordnance equipment maintenance, and to train reservists in the accomplishment of tasks set forth herein. Incumbent of this position will provide assistance in the following duties:

  • Install, modify, overhaul, troubleshoot and repair a complete missile and ordnance system including support and test equipment consisting of numerous complex integrated components.

  • Set up and operate software controlled automatic test equipment (ATE) to test and troubleshoot complex electronic component of missiles and ordnance systems.

  • Receive, store, handle and transport ammunition, rocket, unguided and guided weapons and countermeasures, demolition material, and other types of conventional ordnance.

  • Comply with all federal, DOD, USAF, state, and local regulations concerning hazardous material and waste including all explosive items.

  • Perform and certify munitions, missiles, armament and support equipment serviceability inspection duties.

Travel Required

Occasional travel - You may be expected to travel for this position.

Supervisory status

No

Who May Apply This job is open to Applicants must be United States Citizens and be eligible and willing to join the USAF Reserve. For questions concerning military eligibility, please contact the Air Force Reserve Qualifications Center at 1-800-257-1212.

Questions? This job is open to 2 groups.

  • Job family (Series)
    6641 Ordnance Equipment Mechanic

  • Requirements

Help Requirements Conditions of Employment

  • Must be a United States Citizen

  • Incentives/ Special Wage Rates may or may not apply

  • Disclosure of Political Appointments

  • Preferred Military AFSC: 2W0X1

  • Permanent Change of Station (PCS) may or may not be paid

  • Must meet and maintain Air Force Reserve requirements

CONDITIONS OF EMPLOYMENT:

Position may or will require incumbent to: (1) Fly in military and/or commercial aircraft in the performance of temporary duty (TDY) assignments. (2) Incumbent is required to meet and maintain Air Force Reserve requirements. Incumbent's regular assignments are primarily ART duties: however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities. (3) Position may require a background security investigation to determine suitability for employment and/or a security clearance.

ADDITIONAL CONDITIONS OF EMPLOYMENT:

The work requires frequent standing, bending, stooping, climbing, stretching, and working in tiring and uncomfortable positions and in hard to reach places. The work requires lifting, pushing, pulling, and carrying various sizes and shapes of components and parts weighing up 50 pounds and occasionally up to 100 pounds.

Qualifications

Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of the job elements necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

A specific length of experience is not required. However, you must have had experience (military or civilian, paid or unpaid) of sufficient scope and quality to be able to perform the duties of the specific position for which you are applying. You must show that you have the experience as identified in the Job Elements listed below as they relate to the position for which you are applying. Since your rating will be based upon the information you supply in your application (resume), you should be as detailed as possible and use the following Job Elements as guide to assist you in identifying your relevant work experience.

ELEMENT A: Ability to do the work of Ordnance Equipment Mechanic --ELEMENT B: Ability to Instruct--ELEMENT C:-- Ability to Interpret instructions and specifications including blueprint reading--ELEMENT D: Knowledge of Equipment Assembly, Installation, Repair--ELEMENT E: Knowledge of Technical Practices

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.You will receive credit for all qualifying experience, including volunteer experience.

Education


Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Aircraft Ordnance Systems M...

Department Of Defense

Posted 3 days ago

VIEW JOBS 7/17/2018 12:00:00 AM 2018-10-15T00:00 * Duties Help Duties Summary This is an Air Reserve Technician (ART) Enlisted position. Air Reserve Technicians are part of the regular civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain active membership in an Air Force Reserve unit so long as they occupy Air Reserve Technician positions. As members of reserve units, ARTs receive on average one weekend of military training per month. In addition, they are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members are subject to immediate call to active duty in mobilization to meet a national emergency. This is a standing register used to fill position at AFRC locations as vacancies occur. Some positions may have promotion potential to a higher grade than the grade being filled. Multiple vacancies may be filled from this announcement. The beginning and ending salaries may vary depending on location of position. The first cut-off for this announcement is two (2) weeks from the opening date of this announcement. After the first cut off, the cut-off will be the 25th of each month. The cut-off date for these positions is the 25th of each month. Therefore, if we receive your application by midnight on the 25th of the month, you are eligible to go on the register the following month. Some positions covered may or may not be obligated. Therefore, the selectee may be displaced by reassignment or reduction in force procedures at a later time should the previous incumbent exercise his/her reemployment rights. Retired military are usually ineligible for membership in the Air Force Reserve. Retired military personnel who have active Air Force Reserve assignments may apply provided they show assignment (position and unit) on their application. The Government's most important asset is its people. Learn more about this agency Responsibilities * Troubleshoot integrated weapons systems, electronic, and electro-mechanical components, assemblies and test equipment to determine nature of malfunctions and corrective actions required * Perform maintenance, repair, inspection, fabrication and modification of integrated weapons systems electronic and electromechanical components and their subassemblies * Perform alignment and calibration of integrated weapons systems components, subassemblies, and associated test equipment * Remove/install integrated weapons systems electronic components, and subassemblies into aircraft, alternate mission equipment, and associated test equipment Travel Required Occasional travel - Incumbent may be required to fly in a military and/or commercial aircraft to perform temporary/permanent duty assignments. Supervisory status No Promotion Potential 11 Who May Apply This job is open to… United States Citizens Questions? This job is open to 1 group. * Job family (Series) 6652 Aircraft Ordnance Systems Mechanic * Requirements Help Requirements Conditions of Employment * Must be a United States Citizen. * Permanent Change of Station (PCS) cost may or may not be paid. * Incentives and Special Pay rates may or may not be offered. * Disclosure of Political Appointments * Preferred Military AFSC: 2W1X1 * Must meet and maintain Air Force Reserve military requirements. ADDITIONAL CONDITIONS OF EMPLOYMENT: Position may or will require incumbent to: (1) Incumbent is required to meet and maintain Air Force Reserve requirements. Incumbent's regular assignments are primarily ART duties: however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities. (2) Position may require a background security investigation to determine suitability for employment and/or a security clearance. (3) May be subject to shift work and uncommon tours of duty. (4) Perform expediter/dispatcher duties. (5) This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. (6) Operate crane, truck, tractor, or motor vehicle. (7) Stand, bend, and stoop for extended periods of time. (8) Work outside in inclement weather. (9) Be exposed to toxic fumes, fuel, high pressure air and fluids, electrical shock or burns caused by electrical or RF energy. Dangers also include engine noise, blast, ingestion, and fast actuating metal surfaces such as landing gears, speed brakes, and flaps. (10) Transport, assemble, load, arm, or safe any assigned munitions, explosive device, or assembly up to and including class 1 explosives. (11) Be subject to the hazards related to the removal or disassembly of explosive devices or subassemblies from explosive laden aircraft. (12) This is a drug testing designated position (TDP). The employee is subject to random drug testing. (13) Lift over 80 pounds. (14) Some positions under this announcement may be controlled positions covered by the Personal Reliability Program (PRP). Qualifications A specific length of experience or training is not required. However, you must have had experience and/or training (military or civilian, paid or unpaid) of sufficient scope and quality to be able to perform the duties of the specific position for which you are applying. You must show that you have the experience as identified in the Job Elements listed below as they relate to the position for which you are applying. Since your rating will be based upon the information you supply in your application (resume), you should be as detailed as possible and use the following Job Elements as a guide to assist you in identifying your relevant work experience. (ELEMENT A) --Ability to Do the Work of an Aircraft Ordnance Systems Mechanic Without More Than Normal Supervision. What work can you do by yourself without the help of a boss or supervisor? Give examples of the kinds of instructions your supervisor gives when you start a task. Tell about experience you have had that shows you can work on the basis of your own judgment. (ELEMENT B) --Ability to Use and Maintain Equipment--List the hand tools, power tools, specialized tools, and related support equipment that you have used and give brief examples of the work performed with each. (ELEMENT C) --Knowledge of Equipment Assembly, Installation, Repair, Etc.--List the kinds of equipment you have had to assemble; make; install; test; or repair. Give examples of the work you performed on the equipment such as assemble; disassemble; install; test; maintain; repair; troubleshoot; calibrate; modify; and design.(ELEMENT F) --Technical Practices--Give examples of your work experience that required inventing new methods to do tasks that could not be done in regular ways. State trade theory or technical principles you are familiar with which must be understood to perform the duties of the position for which you are applying. Give examples of work you have performed which required knowledge and experience in new and up-to-date trade practices. Also, give examples of your work, which required precise timing, accurate dimensions, or precise fit. (ELEMENT I) --Use of Test Equipment or Measuring Instruments--List the measuring instruments and/or test equipment that you have used and briefly describe for what purpose you used each. (ELEMENT J) --Troubleshooting--Give examples of your experience troubleshooting equipment. Show the extent to which you had to understand the entire system to isolate the problem. Tell extent of danger to equipment if incorrectly handled while troubleshooting. Give examples of the more difficult troubleshooting you have done. (ELEMENT K) --Ability to Interpret Instructions, Specifications (including Blueprints), Etc.--What kind of instructions, specification or directives have you had to interpret? Be sure to describe experience in interpreting new instructions or specifications concerning changes in operational procedures. How frequent were changes? On what jobs did you have to interpret manufacturers' guides, catalogues, technical manuals, drawings, blueprints, charts or maps? Give examples of the more difficult instructions, etc. you had to interpret. Education N/A Department Of Defense Fort Sill OK

Ordnance Equipment Mechanic

Department Of Defense