Nfb-Instrumentation Technician I/Ii/Iii

Grifols Inc. Clayton , NC 27527

Posted 8 months ago

Grifols is a global healthcare company whose mission is to improve the health and well-being of people. Our three divisions Bioscience, Diagnostic and Hospitaldevelop, produce and market our innovative products and services to medical professionals in more than 100 countries.

We are committed to fostering an environment that creates continuous learning opportunities and encourages professional development and growth. As a company devoted to improving the health and well-being of people, we are looking for talented professionals worldwide. Make a difference and join us in this challenging and rewarding enterprise.

NFB Instrumentation Technician I/II/III:

Technician will support the NFB project as it is in the construction phase. These responsibilities include:

CMMS Asset/Location entry

Calibration development

Job Plan development

LOTO development

Materials Clearance certification documentation

Instrumentation, Electrical, Controls, & Communication Spare Parts identification, CMMS entry, acquisition & stocking

Performing Instrumentation Check-out & Initial Calibrations

Commissioning, Start-up & Validation Support

This position will transition into the support of the NFB facility once it becomes operational.

Technician will provide a high level of Troubleshooting, Repair, & Calibration of the following:

  • Electrical Supply and Distribution (Up to 480VAC)

  • Variable Frequency Drives (VFD's)

  • Servo Drives & Motors

  • Control Systems, Including

  • Programmable Logic Controllers (PLC's) Hardware & Software

  • Various Human Machine Interfaces (HMI's)

  • Various Microprocessors

  • Distributed Control Systems (DCS) Including ABB, Delta V, Andover, Continuum

Process Instrumentation on various types of Process Equipment & Control Components to include:

  • Electronic

  • Pneumatic

  • Hydraulic

  • Temperature

  • Pressure

  • Level

  • Flow

  • Weight/Weighing Systems

  • Various Analytical Devices; i.e. pH, Conductivity, UV, TOC

  • NIST Standards

Requirements:

Instrumentation Tech I: Requires an Associate of Applied Science degree in Instrumentation or Relevant technical field and/or applicable industry accepted training/education (i.e. military, OEM, etc.) supported by licenses plus a minimum of 2 years applicable experience.

Instrumentation Tech II: Requires an Associate of Applied Science degree in Instrumentation or Relevant technical field and/or applicable industry accepted training/education (i.e. military, OEM, etc.) supported by licenses plus a minimum of 4 years applicable experience.

Instrumentation Tech III: Requires an Associate of Applied Science degree in Instrumentation or Relevant technical field and/or applicable industry accepted training/education (i.e. military, OEM, etc.) supported by licenses plus a minimum of 6 years applicable experience.

The ability to read and interpret electrical schematics, control loop schematics, and P&ID drawings is required. Must be capable of creating detailed procedures for calibration in accordance with site and cGMP standards. This position requires that the candidate is proficient in the use of personal computers and is experienced with Windows applications. The position requires the ability to work independently with minimal supervision, and the ability to plan / prioritize workload based on process critical equipment requirements. Candidate must maintain close communications with peers, supervision, and Technical Operations.

Overtime may be required on short notice as Technical Operations demand.

Salary Grade: N9 / N10 / N11

Hours: Day shift project support which WILL turn into 12 hour rotating Shift upon project completion.

Work is performed in a manufacturing environment with rotating shifts. Exposure to biological fluids with potential exposure to infectious organisms. Exposure to chemicals, electrical manufacturing equipment, hand tools and moving machinery. Operates forklifts, tractors and power equipment. Exposure to high levels of noise and to dust/gas/fumes/steam. Exposure to extreme cold below 32* and on occasion, exposure to extreme heat above 100*. Exposure to vibration or oscillating movements of the extremities or the whole body. Occasional entry into confined spaces, requiring kneeling, crawling, climbing and squatting. Works at heights on scaffolding and/or on ladders. Walks on uneven ground. Personal protective equipment required such as; protective eyewear, chemical suits, safety shoes and/or rubber footwear, gloves, hearing protection and a respirator. Heavy lifting and carrying of 45lbs. for up to 6-8 hours per day, with a maximum lift of 75lbs. Work is performed standing, walking, bending and twisting waist for 4-6 hours per day. Repetitive foot movements. Occasionally reaches above and below shoulder height. Occasionally bends and twists neck. Repetitive hand movements with simple grasping of one hand with the ability to make fast, simple, repeated movements of the fingers, hands, and wrists. Ability to make precise coordinated movements, of the fingers to grasp and manipulate objects. Hearing acuity essential. Color perception/discrimination, depth perception and far vision correctable in one eye to 20/30 and to 20/100 in the other eye. Able to communicate information and ideas so others will understand; with the ability to listen to and understand information and ideas presented through spoken and written words and sentences. Performs a wide range of complex tasks. Adheres to a work schedule to meet production standards.

EEO Minorities/Females/Disability/Veterans

Location: NORTH AMERICA : USA : NC-Clayton:USNC0002 - Clayton

Learn more about Grifols


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
IgivC Technician I/Ii/Iii 12Hour Rotating

Grifols Inc.

Posted Yesterday

VIEW JOBS 10/17/2019 12:00:00 AM 2020-01-15T00:00 For more than 75 years, Grifols has worked to improve the health and well-being of people around the world. We are a global healthcare company that produces essential plasma-derived medicines for patients and provides hospitals and healthcare professionals with the tools, information and services they need to deliver expert medical care. SHIFT: 12-hour rotating The IGIV-C Technician is responsible for the isolation of IgG by processing plasma intermediate paste and performing fundamental tasks within a GMP environment by cleaning and maintaining the workplace, cleaning, assembling and disassembling operating equipment per applicable procedures, assisting with process control manipulations and maintaining records/logs in accordance with current standard procedures. TECH I: Primary Responsibilities: * Performs general housekeeping in compliance with the high standards required of a pharmaceutical operation. * Assists in the preparation of all solutions required for the process area and dispenses necessary cleaning/sanitization reagents to clean and sanitize production areas and equipment. * Demonstrates the care and safety necessary to properly safeguard facilities, equipment, product and co-workers. * Assembles and disassembles production equipment. * Operates production equipment (i.e. filters, vessels, skids, columns, etc.). * Operates fork truck in a safe and efficient manner. * Operates CIP circuits. * Monitors and controls processes utilizing the DCS. * Performs real time documentation during production run and maintains accurate records/logs. * Performs integrity tests on Sterile Filters. Additional responsibilities: Buffer Prep Activities: Prepare filter aid for dispensing to zone 1, prepare and install filters, set up transfer panels and filters, assist in unloading of bulk chemical delivery tankers utilizing the DCS; initiate chemical loop circulation, monitor the state of solutions. Zone 1 Activities: Receive and stage II+III paste, calibrate tank pH probes, prepare equipment and harvest filter cake. Zone 2 Sterile Processing Activities: Prepare and test sterile filters, oscillate and sample sterile bulks, assist in the preparation of initial sterile bulks, deliver bulks and sterilize the bulk tank to sterile filter connection. Zone 2 Purification Processing Activities: Assist in the regenerate, testing and packing of columns, assist in cleaning and testing U/F systems, utilize DCS and Unicorn control systems, assist in formulation of sterile bulks, calibrate tank pH and conductivity probes, prepares and installs filters for use, sample and test process solutions. Knowledge, skills & abilities: Basic math skills, basic computer skills, mechanical aptitude, detail oriented, ability to work in a team environment and exercise good judgment. Education requirements: High school diploma or equivalent required. Candidate must possess a high school diploma or equivalent plus Bioworks Certificate or a high school diploma plus 1 year production manufacturing experience in a regulated industry (i.e. FDA, USDA, NRC) within the past 5 years or a 2 or 4 year college degree. TECH II: Primary responsibilities: * Performs all duties described at IGIV-C Technician level. * Performs GMP and Safety Audits of Process area. * Prepares and operates production equipment to standards (i.e. filters, column, bulk tanks, etc.) . * Troubleshoots and identifies problems with production processes and equipment. Additional responsibilities: Buffer Prep: Prepare all buffer solutions and prepare and install filters, set up transfer panels for transfer to staging tanks, unolad bulk chemical delivery tankers utilizing the DCS, sample and perform tests to determine acceptability of prepared solutions, initiate chemical loop circulation and monitor solutions. Zone 1: Stage and add II & III paste and calibrate tank pH probes. Zone 2 Sterile Processing: Prepare initial sterile bulks, oscillate, sample and sterilize bulks. Column Processing: Assist in loading, performing evaluation testing and packing IGIV-C chromotography column. UF/DF Processing: Clean and perform evaluation testing of system, monitor and control chromotography and UF/DF process, assist in initial sterile bulk formulation, sample and test solutions, calibrate tank pH and conductivity probes, prepare and install filters and install UF cassette in UF skid. Knowledge, skills & abilities: Basic math skills, basic computer skills, mechanical aptitude, detail oriented, ability to work in a team environment and exercise good judgment. Education requirements: Typically requires a minimum of 12 months as a Technician in his/her respective department before receiving consideration for advancement to IGIV-C Tech II. Employee must receive a minimum of a meets expectations overall rating on his/her most recent performance review. Employee must have demonstrated competence to perform independently in at least one of the Process Areas listed above and also be proficient in at least 2 of the Process Areas listed above prior to being considered for advancement to IGIV-C Technician II. TECH III: Primary responsibilities: * Performs all duties as described at IGIV-C Technician II level. * Demonstrates the competence to perform process operations with minimal supervision. * Demonstrate a thorough knowledge, understanding, and application of GMP, GLP, safety and housekeeping requirements. * Assists in maintaining communication and cooperating with other teams to aid in constructive approaches toward departmental problems and/or process or equipment changes. * Assists supervisors in establishing, implementing, and maintaining procedures for personnel safety, product integrity, security, and GMP/GLP. * Assists supervisors in the development, improvement, and revision of written procedures (BPR's and SOP's) * Assists in the training of less experienced personnel.; Assist in the write and update Job Safety Analysis (JSA); Successfully complete knowledge assessments; Other duties as assigned by the supervisor. * Troubleshoots and identifies problems with the production process and equipment operation. * Provides feedback for process improvements related to procedures. Additional responsibilities: Buffer Prep: Monitor buffer usage in process areas and plan buffer makeup as processing defines. Zone 1: Monitor processing for the Zone 1 operations for consistency. Zone 2 Sterile Processing: Independently set up, prepare and operate Zone 2 equipment (includes initial sterile bulk, sterile filter initial and sterile filling bulks). Column Processing: Independently load and pack the chromatography columns and perform HETP. UF/DF Processing: Monitor and control the chromatography process utilizing the DCS control systems, monitor and control the UF/DF process utilizing the DCS and formulation of initial sterile bulks Knowledge, skills & abilities: Math skills, computer skills, mechanical aptitude, detail oriented, ability to work in a team environment and independently and exercise good judgment Experience requirements: Typically requires a minimum of 12 months as a Technician II in his/her respective department before receiving consideration for advancement to IGIV-C Tech II. Employee must receive a minimum of a meets expectations overall rating on his/her most recent performance review. Employee must have demonstrated competence to perform independently in at least two of the Process Areas listed above and also be proficient in at least 3 of the Process Areas listed above prior to being considered for advancement to IGIV-C Technician I. Work is performed in a manufacturing environment with rotating shifts. Exposure to biological fluids with potential exposure to infectious organisms. Exposure to chemicals, electrical manufacturing equipment and moving machinery. Exposure to high levels of noise and to dust/gas/fumes/steam. Exposure to extreme cold below 32*. Occasional entry into confined spaces, requiring kneeling, crawling, climbing and squatting. Works at heights on scaffolding and/or on ladders. Personal protective equipment required such as; protective eyewear, chemical suits, safety shoes and/or rubber footwear, gloves, hearing protection and a respirator. Work is performed standing, walking and bending neck for 6-8 hours per day. Frequently sits for 4-6 hours per day. Frequent movement of both hands with the ability to make fast, simple, movements of the fingers, hands, and wrists. Ability to make precise coordinated movements of the fingers to grasp and manipulate objects. Occasionally bends and twists neck and waist. Light lifting of 15lbs for 2-4 hours per day with a maximum lift of 50lbs. Hearing acuity essential. Color perception/discrimination, and far vision correctable in one eye to 20/30 and to 20/100 in the other eye. Able to communicate information and ideas so others will understand; with the ability to listen to and understand information and ideas presented through spoken and written words and sentences. Frequently performs routine tasks by following a set of written or oral instructions/procedures. EEO/Minorities/Females/Disability/Veterans Employee Referral Bonus Eligible CLK78 Location: NORTH AMERICA : USA : NC-Clayton:USNC0002 - Clayton Learn more about Grifols Grifols Inc. Clayton NC

Nfb-Instrumentation Technician I/Ii/Iii

Grifols Inc.