Mfg. Maintenance Technician II - Solutions

Fresenius Medical Care Ogden , UT 84201

Posted 1 week ago


Repair and maintain machinery by preforming electrical and mechanical maintenance on equipment such as gear boxes, motors, pneumatic tools, valves, conveyor systems, robotics, utility systems, production machines and equipment by performing the following duties.


  • Under limited supervision, applies considerable complex knowledge to perform a broad range of tasks which include but are not limited to properly performing mechanical and electrical duties. Replace faulty mechanical, hydraulic, and pneumatic components of machines and equipment. Diagnose malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken wires and cables.

  • Properly weld stainless steel using existing welding technologies in the plant.

  • Repair or replace defective parts. Installs special function and structural parts in devices. Lubricates and cleans parts.

  • Set up and operate lathe, drill press, grinder, and other metal working tools to make and repair parts. Ability to weld when necessary.

  • Works on assignments that are moderately difficult, requiring judgment in resolving issues and/or in making recommendations.

  • Acts as a subject matter expert to repair electrical problems.

  • Install power supply wiring and conduit for newly installed machines and equipment such as rotors, conveyors, and programmable controllers meeting current NEC code.

  • Connect power supply wires to machines and equipment, and connects cables and wires between machines and equipment.

  • Ability to program frequency drives, controllers, etc. when required.

  • Effectively communicate with production and maintenance supervisors or designates to diagnose and correct equipment problems.

  • Observe mechanical devices in operation and understand their function and identify possible causes of trouble.

  • Dismantle devices to gain access to and remove defective parts.

  • Rebuild pneumatic - hydraulic devices.

  • Perform weekly preventative maintenance on state-of-art equipment.

  • Provide positive work environment that promotes safety and teamwork.

  • Contacts are frequently with individuals representing other departments, and/or representing outside organizations. Contacts involve obtaining or providing information or data on matters of moderate importance to the function of the department or which may be of a sensitive nature.

  • Normally receives no instruction on routine daily work, and general instructions on newly introduced assignments.

  • May provide assistance to junior level staff with more complex support tasks that require a higher level of understanding of functions, as directed by immediate supervisor.

  • May escalate issues to supervisor for resolution, as deemed necessary.

  • Maintain general housekeeping of working area and plant.

  • Follow all Fresenius Policies.

  • Regular attendance and maintaining a good attendance record is an essential function of the job.

  • Review and comply with the Code of Business Conduct and all applicable company policies and procedures, local, state and federal laws and regulations.

  • Assist with various projects as assigned by direct supervisor.

  • Other duties as assigned.

Additional responsibilities may include focus on one or more departments or locations. See applicable addendum for department or location specific functions.


  • The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands and fingers, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee must regularly lift and/or move 10 to 25 pounds, frequently lift and/or move up to 50 pounds.

  • While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock; and vibration. The noise level in the work environment is usually loud.

  • Position requires that employee be available to respond to call-ins on off-hours so that production machinery can be properly maintained on our continuous process operation.


  • High School Diploma required; Associate's Degree desirable


  • 2 4 years' related experience.

  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

  • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

  • Forklift Certification

EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity

See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Driver And Maintenance Technician (Ogden Utah)

Holland Company

Posted 1 week ago

VIEW JOBS 11/2/2018 12:00:00 AM 2019-01-31T00:00 Holland LP provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, citizen status, religion, ancestry, national origin, age, disability, sex, marital status, military status, pregnancy, sexual orientation or any other basis prohibited by applicable federal, state or local employment laws or regulations in every location in which the company has facilities. JOB SUMMARY: To drive the MOD Mobile Welder to and from the work site locations to the Maintenance shop location in a rotating routine. Assess the unit’s condition prior to leaving the work location and complete a functional hand off upon the unit returning to the work location. Assist with performing various tasks from pre- testing, disassembly, servicing and repairing, reassembling and final testing of a MOD Mobile Welder and its’ auxiliary pieces of equipment (flash butt welder, puller, grinders) to meet the objectives of the Annual Preventative Maintenance program. Work to improve overall productivity, quality and reliability of the operating equipment and the program. ESSENTIAL FUNCTIONS: Duties include, but are not limited to: * Working in full compliance and procedures of the Holland Company Safety program to ensure a safe working environment. * Appling safety & 5-S discipline, practices and enforcement of Holland Company safety policies. * Understanding and following all Holland and MOD Division Operating Policies and Guidelines. * Driving units to and from the work locations to the maintenance shop per assigned schedule. * Assessing a unit’s conditions prior to leaving a work location. * Completion of an acceptance process upon returning the unit to a work location * Operating the Mobile Welder, Flash Butt welding machine and puller to make an assessment of the equipment. * Periodically assisting with disassembly, servicing and reassembly of machinery components back to functional operating condition meeting existing standards. * Using a variety of hand and power tools to service the MOD mobile welder and auxiliary pieces of equipment. * Assisting with utilizing various rail cutting saws and grinders to assist with completing the final testing process. * Utilizing Holland’s NCR (nonconformance reporting), OFI (Opportunity for Improvement) and Quality Control Processes to maintain the Quality and Continuous Improvement objectives. * Conforming to Holland Housekeeping policies. * Assisting other department personnel in completing any objective or tasks with proper guidance from key personnel. PHYSICAL REQUIREMENTS: * Ability to lift up to 50lbs with reasonable accommodations. * Ability to climb in and out of mobile operating equipment. * Ability to work while standing, walking, bending, stooping, twisting and sitting for extended periods are required to perform basic job functions. * Ability to work 40 plus hours. ENVIRONMENTAL CONDITIONS: * Exposure on a regular basis to mostly indoor and sometimes out door weather conditions. * Shop environment-dry conditions, heated shop, non-air-conditioned, concrete floor. * Wearing and use of all PPE and any additional safety related gear to perform job functions. * Focused environment that supports safety and housekeeping practices. QUALIFICATIONS: * Must have High School diploma or equivalent. * Minimum 1-year experience working with performing maintenance, repairs or assembling various heavy industrial hydraulic and mechanical operated equipment. * Must possess and maintain (including mandated random D & A testing) a valid Class A Commercial Driver’s License & Medical Certification with air brake endorsement. * Must possess a valid drivers license and meet the Holland Vehicle Fleet Policy. * Travel up to 100% includes ground & possibly air travel. * Experience in use of basic hand and power tools including rail cutting saws and grinders. * Have skills related to repairing of broken bolts and damaged threaded holes (use of drills, extractors and thread tapping). * Have general fastener and hardware knowledge. * Employee should be quality conscious, self-motivated with strong work ethic and positive attitude. * Have good oral and written communication skills. * Have good math skills. * Have Basic computer skills. * Achieve and maintain Forklift driver certificate. * Pass a mandatory pre-employment drug screen, MOD physical requirement testing and E-Railsafe background check. * Must be able to pass and maintain all required safety and background check required by Holland and their Customers (E-RAILSAFE, RWP, Contractor Orientations, etc.). Disclaimer This job description is not intended to be an exhaustive list of all responsibilities, skills, duties, requirements, or working conditions associated with the job. Management reserves the right to revise this job description at any time to add or remove tasks as circumstances change, (e.g. emergencies, changes in personnel, workload, rush jobs or technical developments). About the Company… Holland L.P. is a $275mm organization headquartered in Crete, IL. We have over 1,200 employees who provide a variety of contract services within the railroad industry in North America. We strive to set industry standards for both our service expertise and our equipment in fulfilling our mission outlined in our slogan, A Rail Solutions Partnership Unlike Any Other. In addition, Holland designs and manufactures equipment and products for utilization by our railroad customers, both domestically and internationally. Our leadership decisions are guided by our core values, which are: Respect, Family, Partnership, Improvement and Integrity. Previous Applicants: Email: Password: If you do not remember your password click here . Back to Search Results New Search Company Information/Careers | Maintenance of Way | Mechanical | Global Equipment Sales | Holland Library CALL 708-672-2300 © Copyright 2016 Holland LP Privacy Policy | Terms & Conditions About Us Careers Safety Press Releases Events Community Relations Holland Library Curran Group Holland Company Ogden UT

Mfg. Maintenance Technician II - Solutions

Fresenius Medical Care