Mechanical Engineer

Qualcomm San Diego , CA 92140

Posted 6 months ago

Job Detail

Job Id E1973271 Job Title Mechanical Engineer Post Date 06/25/2019 Company Qualcomm Technologies, Inc.

Job Area Engineering

  • Hardware

Location California

  • San Diego

Job Overview Probe HW design and analysis PWB form, fit, keep outs, test points, and applicable loading or stress issues.

Performing mechanical simulations of various probehead enclosure and stiffener designs to estimate deflection due to ATE and probe loads.

Optimization of the mechanical design and material selection to develop robust probecards for high volume wafer level testing. Conduct and coordinate mechanical tests on PWBs assemblies for material properties and mechanical behavior validation.

Define DOEs and test plans and work with operations team and applications lab.

Detect/ troubleshoot deflection and stress risks and provide solutions to support high volume testing. Support development and qualification of new ATE platforms and fine pitch probe designs.

Must work closely with cross functional teams and approved suppliers. " id="hdnJobOverview" />The QCT Product & Test group has an opening for a mechanical design position with an emphasis on bench boards and characterization fixturing along as well as ATE loadboard/probecards.

The focus will be on mechanical design and integrity of probehead and probe socket design constraints, tolerance and deflection analysis, troubleshooting alignment issues, and supplier drawing approval for the PTE probe test environment. Responsibilities include the following: Probe HW design and analysis PWB form, fit, keep outs, test points, and applicable loading or stress issues.

Performing mechanical simulations of various probehead enclosure and stiffener designs to estimate deflection due to ATE and probe loads.

Optimization of the mechanical design and material selection to develop robust probecards for high volume wafer level testing. Conduct and coordinate mechanical tests on PWBs assemblies for material properties and mechanical behavior validation.

Define DOEs and test plans and work with operations team and applications lab.

Detect/ troubleshoot deflection and stress risks and provide solutions to support high volume testing. Support development and qualification of new ATE platforms and fine pitch probe designs.

Must work closely with cross functional teams and approved suppliers. All Qualcomm employees are expected to actively support diversity on their teams, and in the Company. Minimum Qualifications BS Mechanical Engineering with 2+ years experience.

Preferred Qualifications The candidate should have 2-4 years of overall experience in mechanical design using Solid Modeling.

Experience with automated test equipment will be preferred. Knowledge of Automated Test Equipment for wafer level packages.

Working knowledge of Creo (Pro Engineer) or equivalent CAD tool and FEA software (Ansys/Creo-Simulate/ Solidworks etc). Should have hands-on experience in mechanical and material testing.

Ability to perform tolerance analysis and have a working knowledge of ASME Y14.5 GD&T tolerances. Ability to perform deflection analysis for PWBs and provide designs of probecard assemblies to meet the requirements of the project.

Candidate shall be self-motivated, energetic, schedule driven, and work on multiple projects.

Possess strong written and verbal communication skills. Proficient use of Microsoft Power Point and other Office software." id="hdnPreferredQualifications" />The candidate should have 2-4 years of overall experience in mechanical design using Solid Modeling.

Experience with automated test equipment will be preferred. Knowledge of Automated Test Equipment for wafer level packages.

Working knowledge of Creo (Pro Engineer) or equivalent CAD tool and FEA software (Ansys/Creo-Simulate/ Solidworks etc). Should have hands-on experience in mechanical and material testing.

Ability to perform tolerance analysis and have a working knowledge of ASME Y14.5 GD&T tolerances. Ability to perform deflection analysis for PWBs and provide designs of probecard assemblies to meet the requirements of the project.

Candidate shall be self-motivated, energetic, schedule driven, and work on multiple projects.

Possess strong written and verbal communication skills. Proficient use of Microsoft Power Point and other Office software. Education Requirements BS Mechanical Engineering with 2+ years experience Keywords Pro Engineer, Probecard, ATE, 93K, UFLEX



icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Mechanical Engineer

Department Of The Navy

Posted 3 weeks ago

VIEW JOBS 11/17/2019 12:00:00 AM 2020-02-15T00:00 * Duties Help Duties Summary The selectee for this position will serve as a Mechanical Engineer in the Public Works Department (PWD) of NAVAL FACILITIES ENG COMMAND ATLANTIC. Learn more about this agency Responsibilities This is a full-time, temporary assignment Not To Exceed (NTE) 1 year. This assignment may be extended up to 2 years at the discretion of management and in accordance with applicable regulation. This position may be filled as a Temporary Promotion or Temporary Reassignment. This position is a 100% TDY position at Camp Lemonnier, Djibouti, Africa * Evaluate technical aspects of development and design work accomplished by the design division and provide to contractors. * Coordinate technical project management efforts (e.g., design, system development, evaluations, certifications) with contractors to make corrective adjustments for program success. * Negotiate design modifications with representatives to verify agreements satisfy the interests of facilities programs and projects. * Negotiate design modifications with representatives to verify agreements satisfy the interests of facilities programs and projects. Travel Required 76% or greater - This position is a 100% TDY position at Camp Lemonnier, Djibouti, Africa. Supervisory status No Promotion Potential 13 * Job family (Series) 0830 Mechanical Engineering * Requirements Help Requirements Conditions of Employment * Must be a US Citizen. * Must be determined suitable for federal employment. * Must participate in the direct deposit pay program. * New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/. * Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement. Qualifications In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience. SELECTIVE PLACEMENT FACTOR (Basic Qualifications): This position requires current registration as a Professional Engineer (PE) in any state, District of Columbia, Puerto Rico or Guam. If you meet this requirement it is highly recommended that you provide a copy of your current registration with your application. In addition to the Basic Qualifications for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Directs the day-to-day development of large projects and managing project schedules; 2) Coordinates the activities of professional architects, engineers, and planners involved with each project; 3) Performs design review of construction drawings and specifications for mechanical systems such as plumbing, heating, ventilating, air conditioning, utilities, fuel, controls, and steam distribution. Note: This information must be FULLY supported in your resume to be considered for the position. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Department Of The Navy San Diego CA

Mechanical Engineer

Qualcomm