Sorry, this job is no longer accepting applications. See below for more jobs that match what you’re looking for!

Material Engineer

Expired Job

Department Of Defense Fallbrook , CA 92028

Posted 3 months ago

  • Videos

  • Duties

HelpDuties Summary

The selectee for this position will serve as a Material Engineer for the DEPARTMENT OF THENAVY.

THIS IS AN EXPEDITED HIRING AUTHORITY ANNOUNCEMENT. The Duncan Hunter National Defense Authorization Act (NDAA) FY 2009 provides that the Secretary of Defense can designate acquisition positions as shortage positions and recruit and appoint highly qualified persons to these positions. This announcement is open to accept resumes from candidates interested in helping the Department of the Navy meet our mission requirements for the acquisition of systems, equipment and facilities.

This public notice announcement is for anticipated vacancies to be filled under the Expedited Hiring Authority (EHA) for acquisition positions located at Department of Navy installations identified in this public notice. Positions may be filled as permanent, term, or temporary with a full-time or part-time work schedule.

Pay will vary by geographic location. There may or may not be actual/projected vacancies at the time you submit your application. As such, Notices of Results (NORs) may or may not be sent to applicants who apply to this announcement. Please read this Public Notice in its entirety prior to submitting your application for consideration.

Vacancies filled from this announcement may be filled at any grade level listed and in equivalent pay systems (e.g., NH, NJ, NK, etc.). Selectees may be appointed to a position with promotion potential (e.g. selected at the GS-5 grade with potential to the GS-11). If selected below the full performance level, incumbent may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed.

Recruitment incentives may be authorized.

Information on Temporary and Term Appointments:

Temporary appointments may be extended up to 3 years at the discretion of management and in accordance with applicable regulations.

Temporary actions taken under this announcement may be made permanent without further competition.

Term appointments may be extended up to 6 years at the discretion of management and in accordance with applicable regulations. Additionally, selectees may be noncompetitively converted to permanent career-conditional or career appointments under specific conditions.

Temporary or term positions may be terminated at any time before the established not-to-exceed date.

Learn more about this agency

Responsibilities

Duties and responsibilities vary and increase according to grade level. Successful selectees will perform duties such as
0806 Material Engineering: This series covers positions managing, supervising, leading, and/or performing professional engineering and scientific work to: determine and advise on a material's essential composition, atomic and molecular configuration, and processing; relate the material's essential composition to its properties, end use, and performance in engineering, architecture, and scientific applications and programs; examine the interaction of materials in their processes and applications, taking into account the associated equipment, systems, components, and their fabrication, design, or use; develop, maintain, and apply materials and material solutions to meet certain mechanical, electrical, environmental, and chemical requirements; and/or test and evaluate substances for new applications.

Travel Required

Occasional travel - Travel requirements will vary. Travel from normal duty station to CONUS and OCONUS may be required and may include remote or isolated sites. Travel may be on military and commercial aircraft for extended periods of time.

Supervisory status

No

Who May ApplyThis job is open toUnited States Citizens

Questions? This job is open to 1 group.

  • Job family (Series)
    0806 Materials Engineering

Similar jobs

  • Engineers, Materials

  • Materials Engineers

  • Requirements

HelpRequirements Conditions of Employment

  • Must be a US Citizen.

  • Males must be registered or exempt from Selective Service. www.sss.gov

  • Must be determined suitable for federal employment.

  • Must participate in the direct deposit pay program.

  • May be required to successfully complete a probationary/trial period.

  • See Other Information and Requirements section for additional requirements.

All eligibility and qualifications requirements must be met by the referral cut-off date.

This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA) and requires additional education, training and experience. Positions may be in any DAWIA Career Field at Level I, II, or III. If you possess DAWIA Certification, please indicate your Certification Level and Career Field information in your resume.

Applicants not certified may still apply and be selected, but must achieve certification within 24 months of appointment. Certification requirements may be viewed at http://icatalog.dau.mil/onlinecatalog/CareerLvl.aspx.

Certain positions may be designated as Critical Acquisition Positions (CAPs). In addition to DAWIA certification requirements, individuals selected for CAP must also be a member of the Acquisition Corps, become a member, or obtain a position waiver at the time of selection and sign a three-year tenure agreement prior to assuming the position. If you are an Acquisition Corps member, please indicate your membership in your resume. Acquisition Corps requirements may be viewed at http://www.secnav.navy.mil/rda/workforce/Documents/dawiaoperatingguide21dec2011forwebsite1.pdf

Senior level positions may be designated as CAP with further designation as a Key Leadership Position (KLP). As a KLP, the selectee will be required to sign a Tenure Agreement which requests the selectee to remain in this position for a designated period of time, generally 3-4 years.

Must be able to obtain an interim and/or final (e.g., confidential/secret/top secret, etc.) security clearance prior to entrance on duty AND must be able to maintain the required level of clearance while employed in the subject position. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

Positions that are supervisory/ managerial require that first time supervisors/managers complete a one-year trial/probationary period if not previously completed in a competitive or other excepted service position. Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. The selectee will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Qualifications

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

BASIC EDUCATION

have a combination of college-level education, training, and/or technical exp that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying eng, and (2) a good understanding, both theoretical and practical, of the eng sciences and techniques and their applications to one of the branches of eng. The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure:

Current registration as an Eng Intern (EI), Eng in Training (EIT), or licensure as a Professional Eng (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration; or (II) Written Test: Evidence of having successfully passed the Fundamentals of Eng (FE) examination or any other written test required for professional registration by an eng licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses:

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in eng that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an eng program as described in paragraph A (above); or (IV) Related curriculum: Successful completion of a curriculum leading to a BA degree in an appropriate scientific field, e.g., eng technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional eng experience acquired under professional eng supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional eng competence, or several years of prior professional eng-type experience, e.g., in interdisciplinary positions.

BASIC EDUCATION QUALIFIES FOR THE GS-05

GS-07: Applicants must also possess at least one year of specialized experience at or equiv to the GS-05 grade level or pay band in the Federal service or equivalent experience in the private or public sector. OR

have successfully completed one full year of grad level education. have successfully completed a bachelor's degree with superior academic achievement. OR

have successfully completed an engineering bachelor's degree and have one year of appropriate experience as a technician equiv to the GS-05 grade level or higher. OR

have successfully completed a 5 year program of study of at least 160 semester hours leading to a bachelor's degree in engineering. OR

have a combination of experience and education as described above that equates to one year of exp. Percentage of the required education plus percentage of the required experience equal one hundred percent.

Specialized experience must demonstrate the following:

utilizing basic techniques, procedures, and methods; understanding and completing limited engineering designs and projects; carrying out, interpreting, and explaining basic computations and calculations; and reading, understanding, manipulating analyzing, interpreting, and conveying findings.

GS-09: Applicants must also possess at least one year of specialized experience at or equiv to the GS-07 grade level or pay band in the Federal service or equivalent exp in the private or public sector OR

have successfully completed two full years of progressively higher graduate level education leading to a master's degree. OR

have successfully completed a master's or equiv grad degree. OR

have successfully completed a bachelor's degree with superior academic achievement and I have one year of professional eng exp that required and was characterized by 1) professional knowledge of eng, 2) professional ability to apply such knowledge to eng problems, and 3) positive and continuing development of professional knowledge and ability. OR

have successfully completed a 5 year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and have one year of appropriate professional experience that required and was characterized by 1) professional knowledge of engineering, 2) professional ability to apply such knowledge to engineering problems, and 3) positive and continuing development of professional knowledge and ability. OR

have a combination of exp and education as described above that equates to one year of exp. Percentage of the required education plus percentage of the required experience equal one hundred percent.

Specialized experience must demonstrate the following: researching, interpreting, and carrying out eng assignments.

GS-11: Applicants must also possess at least one year of specialized experience at or equiv to the GS-09 grade level or pay band in the Federal service or equivalent experience in the private or public sector OR

have successfully completed three full years of progressively higher level graduate ed leading to a Ph.D. or equivalent degree. OR

have a combination of experience and education as described above that equates to one year of experience. Percentage of the required education plus my percentage of the required exp equal one hundred percent.

Specialized experience must demonstrate the following: 1) researching, interpreting, and carrying out engineering assignments; AND 2) providing technical input on the planning, design, construction, testing, or maintenance of projects.

GS-12: Applicants must also possess at least one year of specialized experience at or equiv to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector.

Specialized experience is defined as experience that is typically in or related to the work of the position to be filled and has equipped you with the particular knowledge, skills, and abilities, to perform successfully the duties of the position. Specialized experience must demonstrate the following: 1) researching, interpreting, and carrying out engineering assignments; 2) providing technical input on the planning, design, construction, testing, or maintenance of projects; AND 3) collecting and analyzing engineering data to solve problems, develop reports, and provide

GS-13: Applicants must also possess at least one year of specialized experience at or equiv to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector.

Specialized experience must demonstrate the following: 1) researching, interpreting, and carrying out engineering assignments; 2) providing technical input on the planning, design, construction, testing, or maintenance of projects; 3) collecting and analyzing engineering data to solve problems, develop reports, and provide recommendations; AND 4) prepare, present, and evaluate plans, designs, reports, and correspondence.

Additional qualification information can be found from the following Office of Personnel Management website:

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Warrant authority above the small purchase threshold may be required.

Education

If you are using education to meet all or part of the qualification requirements, you must submit a copy of your transcripts or an itemized list of college courses which includes equivalent information from the transcript (course title, semester/quarter hours, and grade/degree earned) in your resume. See OPM's General Policies for information on crediting education.

Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying for further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Applications will be accepted from students who expect to complete qualifying education within 9 months from the date of application. However, agencies are required to verify that the education has been completed successfully before any applicant can be appointed (report to work); therefore, your selection or start date may be impacted by proof and completion of all position requirements.



See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
World Language Spanish Teacher 60 Assignment

Fallbrook Union High School District

Posted 2 weeks ago

VIEW JOBS 11/30/2018 12:00:00 AM 2019-02-28T00:00 WORLD LANGUAGE, SPANISH TEACHER, 60% ASSIGNMENT Employer: Fallbrook Union High School District Date Posted: 11/29/2018 Contact: Jean Proctor 760-723-6332 6493 Number Openings: (At time of posting) 1 Length of Work Year: 183 days per school year Employment Type: Part Time Application Deadline: 12/13/2018 11:55 PM Pacific Salary: Based on Years of Experience and # of Units Above the Bachelors Date Posted: 11/29/2018 Application Deadline: 12/13/2018 11:55 PM Pacific Employment Type: Part Time Length of Work Year: 183 days per school year Salary: Based on Years of Experience and # of Units Above the Bachelors Number Openings: (At time of posting) 1 Contact: Jean Proctor Email: jproctor@fuhsd.net Phone: 760-723-6332 6493 Job Description / Essential Elements: Print FALLBROOK UNION HIGH SCHOOL DISTRICTJOB DESCRIPTION: CERTIFICATED TEACHERPlease note that specific programs and subject areas will require varied duties, responsibilities, qualifications, physical abilities, and other certifications than those listed. This description is offered strictly as a generic guideline to the basic duties of a classroom teacher.PRIMARY FUNCTION: Teaches one or more classes of designated subject to students in grades 9-12 and assists in other school programs as assigned.MAJOR DUTIES & RESPONSIBILITIES: Teaches content and skills in designated subject to secondary students, utilizing the course of study adopted by the Board of Education. Instruct students in citizenship, basic communication skills, and other general elements of the course of study common to all teachers, as specified in state law and administrative regulations and procedures of the school district. Adapts designated subject material and methods to develop relevant sequential assignments that guide and challenge students. Develops lesson plans and supplementary materials compatible with the basic instructional philosophy. Encourages students to think independently and to express original ideas. Provides individual and small group instruction where necessary in order to adapt the curriculum to the needs of each student. Evaluates each student's progress in designated subject and prepares progress reports. Establishes and maintains standards of student behavior needed to provide an organized, productive classroom environment. Maintains professional competence through participation in in-service educational activities provided by the district and/or self-selected professional growth activities. Performs basic attendance, accounting, business services, and requisitions as required. Strives toward the accomplishment of District adopted goals and objectives.OTHER DUTIES & RESPONSIBILITIES: Identifies student needs, and cooperates with other professional staff members in assessing and helping students solve health, attitude, and learning problems. Communicates with parents and school counselors on the individual student's progress. Participates in curriculum and other developmental programs within the school of assignment and/or on a district level. Shares in the sponsorship of student activities and participates in faculty committees on a voluntary basis.SUPERVISION EXERCISED OR RECEIVED: Supervises, plans, and coordinates the work of aides, classified personnel, assistants, and other paraprofessionals. Receives supervision pursuant to the evaluation proceedings.MINIMUM QUALIFICATIONS: Credential: Single Subject in area of specialization.Education: Bachelor's degree with major or minor in designated subject, including all courses needed to meet credential requirements. Must pass the California Basic Educational Skills Test (CBEST).Experience: Completion of teacher's preparation program and student teaching.Personal Qualifications: Ability to meet state standards of physical and mental health.PHYSICAL ABILITIES: Visual ability to read handwritten or typed documents, and the display screen of various office equipment and machines. Able to conduct verbal conversation. Able to hear normal range verbal conversation (approximately 60 decibels). Able to sit, stand, stoop, kneel, bend and walk. Able to sit for sustained periods of time. Able to climb slopes, stairs, steps, ramps and ladders. Able to lift up to 30 pounds frequently, and 30 pounds occasionally. Able to carry up to 30 pounds frequently, and 30 pounds occasionally. Able to push and pull objects weighing up to 30 pounds. Able to exhibit full range of motion for shoulder external rotation and internal rotation. Able to exhibit full range of motion for shoulder abduction and adduction. Able to exhibit full range of motion for elbow flexion and extension. Able to exhibit full range of motion for shoulder extension and flexion. Able to exhibit full range of motion for back lateral flexion. Able to exhibit full range of motion for hip flexion and extension. Able to exhibit full range of motion for knee flexion. Able to demonstrate manual dexterity necessary to operate a computer and other classroom equipment in a safe and efficient manner. (Note: will vary based on particular duties of position, example Physical Education, Home Economics, Shop classes, etc.) Requirements for Applying 1. Letter of Introduction2. Resume3. 3 Letters of Recommendation5. Credential & Certificates All required material is to be attached to the Ed-Join application. No hard copies, emailed copies or faxed copies will be accepted. Requirements for Applying 1. Letter of Introduction2. Resume3. 3 Letters of Recommendation5. Credential & Certificates All required material is to be attached to the Ed-Join application. No hard copies, emailed copies or faxed copies will be accepted. Candidates are being sought with a current California Single Subject World Language, Spanish credential. EL Authorization required.Salary determined by years of experience and postgraduate units. Credit given for ten years' experience. Any years beyond ten are credited on a 2:1 ratio.The Fallbrook Union High School District prohibits unlawful discrimination against and/or harassment of district employees and job applicants on the basis of actual or perceived race, color, national origin, ancestry, religious creed, age, marital status, pregnancy, physical or mental disability, medical condition, veteran status, gender, sex or sexual orientation at any district site and/or activity. ANY OFFER OF EMPLOYMENT IS SUBJECT TO A CRIMINAL HISTORY CHECK AND DRUG SCREEN SUBJECT WILL BE BARRED FROM EMPLOYMENT IF HE/SHE HAS A PRIOR CONVICTION FOR A SERIOUS OR VIOLENT FELONY OR A POSITIVE DRUG SCREEN. APPLY(CURRENT EMPLOYEES ONLY) APPLY Back To Search Results Page Fallbrook Union High School District Fallbrook CA

Material Engineer

Expired Job

Department Of Defense