Manufacturing Engineer

Edac Technologies Cheshire , CT 06408

Posted 2 months ago

Manufacturing Engineer - Exempt

Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.

This challenging positon is a great opportunity for the right candidate to become a part of a dedicated team of aerospace manufacturing professionals. This position will be responsible for performing general engineering tasks that optimize processing capabilities of the facility through process development and verification. The Manufacturing Engineer will analyze process flow, developing performance enhancements and monitoring production results.

Location: Based out of Newington, CT

Reports to: Engineering Manager

Salary Grade:

Essential Duties & Responsibilities

Reasonable accommodations may be made to enable individuals with disabilities to perform.

Create and / or improve on systems that optimize the efficiency of material flow throughout the facility.

Develop the most efficient and cost effective manufacturing process, and sequence of production operations from blueprints, quality documents, and purchase orders.

Coordinate production processes by creating operation sheets and providing all manufacturing related information.

Create material process requisitions with technical data requirements for special manufacturing processes.

Develop most effective solutions to production and quality problems that are related to material, production processes and tools.

Manage product and process engineering related activities during the development stage from raw material to finished product

Research and develop process sheets with proper work instructions for the operators, inspectors and shipping.

Will act as a liaison for the shop process development, integrating with management, shop personnel, purchasing, production control, vendors and customers to make the job as productive as possible.

Implement all Engineering Changes from the Customer to the process sheets, programs, etc.

Interact with various internal functions to provide manufacturing engineering support for production.

Participate in Root Cause Analysis and implementation of Corrective Actions.

Initiate and lead optimization projects to improve quality outcomes, reduce production costs, and shorten cycle time.

Build trust and confidence with customers to resolve engineering, manufacturing, and quality issues.

Must be able to read, write, understand, and speak English at a functional level.

Various other duties as assigned by Supervisor.

Participate in training as required

5-10% Domestic Travel required

Physical Demands:

Work usually performed in a combination of office and plant setting.

Some lifting, moving instrumentation, performing tests in various areas of the facility required

Must be able to lift, push, or pull at least 50 lbs.

Regularly required to sit, stand, reach, bend, and move about our facility


Bachelor's Degree in Mechanical Engineering or similar.

Must have the ability to work with CAD Systems such as Solidworks, NX 7.5 and above, Microsoft Office to generate work instructions / process sheets.

Desire for practical and tangible 'hands-on' work in a manufacturing environment.

Knowledge/experience in the machining of nickel and titanium based alloys preferred (i.e. milling, turning, broaching, and special processes)

Demonstrated record or desire of same for the self-directed management of multiple tasks in a high-tempo manufacturing environment.

An determined commitment to overcome challenges in order to resolve issues and accomplish both company and personal objectives.

Must possess excellent skills in blueprint reading and interpretation, have the ability to understand customer requirements and specifications.

AAP Statement

Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action.

We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

  • Subject to change with or without notice*

1st Shift

icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Manufacturing Engineer

Raytheon Technologies Corp

Posted 4 months ago

VIEW JOBS 7/7/2021 12:00:00 AM 2021-10-05T00:00 Job ID 01455744 Most Recent Date Posted 07/06/2021 City Cheshire State Connecticut Country United States Date Posted: 2021-06-07-07:00 Country: United States of America Location: HCT07: S&IS (AIS) - Cheshire Goodrich Corporation, Cheshire, CT, 06410 USA This position will be responsible for the process engineering support of production electromechanical and gyroscopic products. The position includes monitoring and maintaining production yields by troubleshooting, evaluating, and resolving technical complex issues affecting process, tooling, materials, or equipment. You will also assist in designing and developing manufacturing processes for products in full rate production and for transitioning new products from design and development to full rate production. Primary Responsibilities: * Analyzes and modifies product designs in collaboration with Design Engineering to assure manufacturability. * Develops design, selection, specification, and optimization of the required equipment, fixtures, tooling, gaging, * processes, and operations. Determines other technical matters required to make a given product according to the * desired volume, timetable, cost, quality level, and other specifications. Includes the monitoring of established * processes via data collection for statistical analysis purposes as well as the use of various continuous improvement * enablers. May evaluate manufacturing capability and provide technical support at the supply base. * Designs and develops manufacturing processes for products, taking into consideration problems inherent in the * transfer of technology from research to manufacturing. Such design and development may include new or * revised processes. Develops procedures for the economical mass production in cooperation with pilot-plant and * production departments. Conducts tests and measurements throughout stages of production to determine * control over applicable variables; and services, troubleshoots and solves production process problems with * processes or equipment already in operation. Reviews field support requirements and recommends tools and test * equipment. Determines maintenance and repair materials required for deployment. May make recommendations * concerning acquisition and use of new technological equipment and materials. Basic Qualifications: * Bachelor's degree and 2 years of prior relevant experience OR * In absence of a degree, 6 years of relevant experience is required * Engineering/Other Technical Positions: Bachelor's degree (typically in Science, Technology, Engineering or Mathematics (STEM)) and a minimum of 2 years of prior relevant experience unless prohibited by local laws/regulations * Must be a U.S. Person/Permanent Resident "Green Card" holder Preferred Qualifications: * Previous manufacturing industry experience preferred Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Do you want to be a part of something bigger? A team whose impact stretches across the world, and even beyond? At Collins Aerospace, our Mission Systems team helps civilian, military and government customers complete their most complex missions - whatever and wherever they may be. Our customers depend on us for intelligent and secure communications, missionized systems for specialized aircraft and spacecraft and collaborative space solutions. By joining our team, you'll have your own critical part to play in ensuring our customer succeeds today while anticipating their needs for tomorrow. Are you up for the challenge? Join our mission today. We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! Collins Aerospace Diversity & Inclusion Statement: Diversity drives innovation: inclusion drives success. We believe a multitude of approaches and ideas enable us to deliver the best results for our workforce, workplace, and customers. We are committed to fostering a culture where all employees can share their passions and ideas so we can tackle the toughest challenges in our industry and pave new paths to limitless possibility. WE ARE REDEFINING AEROSPACE. Some of our competitive benefits package includes: * Medical, dental, and vision insurance * Three weeks of vacation for newly hired employees * Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option * Tuition reimbursement * Life insurance and disability coverage * Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal * Ovia Health, fertility and family planning * Employee Assistance Plan, including up to 5 free counseling sessions * Redbrick - Incentives for a Healthy You * Autism Benefit * Doctor on Demand, virtual doctor visits * Adoption Assistance * Best Doctors, second opinion program * And more! Nothing matters more to Collins Aerospace than our strong ethical and safety commitments. As such, all U.S. positions require a background check, which may include a drug screen. Note: * Background check and drug screen required (every external new hire in the U.S.) * Drug Screen only performed on re-hires who have been gone for more than 1 year At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Privacy Policy and Terms: Click on this link to read the Policy and Terms Raytheon Technologies Corp Cheshire CT

Manufacturing Engineer

Edac Technologies