Machine Solder Operator - 1St

TTM Technologies, Inc. Stafford Springs , CT 06076

Posted 2 months ago

SCOPE:

This position is responsible to operate Wave Solder, Wenesco and Selective solder equipment; sets up and operates semi-automatic machines used in the production of pcb assemblies. Responsible for the overall operation of large-scale manufacturing machine solder equipmnet including actions such as feeding materials for processing, adjusting settings, performing minor repairs, and pulling finished product from the line. Must be able to handle a fast paced environment with a high volume workload.

DUTIES & RESPONSIBILITIES: (include but are not limited to)

  • Solder electronic components to the highest industry standards (IPC-A-610 Class III, J-STD-001 Class III).

  • Prepares boards for solder operations. Cleans boards and masks designated areas.

  • Visually check work in process for solder defects and makes adjustments as required.

  • Clean printed circuit boards and equipment as necessary.

  • Comprehend and follow instructions, read and understand blueprints.

  • Communicate regularly to supervisor/managers.

  • Work effectively and responsibly with others.

  • Maintain cleanliness of the work area.

  • Collects solder dross in proper labeled containers and transports to hazardous waste area.

  • Accomplish all job related paperwork in the most accurate and ethical manner.

  • Attends meetings, communicates regularly with managers and supervisors, attends special training, maintains a clean, safe work environment and communicates to supervisors safety hazards and issues.

  • Follow all Company Safety and ESD Program requirements. Responsible to report all accidents, near misses, unsafe acts and unsafe conditions. Perform duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow directions identified in the Job Safety Analysis (JSA), PPE Assessment, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts.

  • Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Resident; b) recognition of Foreign Person visitors by badge differentiation.

  • Properly handle and dispose all waste, including hazardous wastes that are generated in daily operations as directed by the EHS department

  • All other assigned duties as required within the production organization.

EDUCATION & EXPERIENCE:

  • High School Diploma or equivalent plus 1 year machine soldering experience in equivalent industry.

  • Good English skills, able to read, write and speak clearly.

  • Ability to understand printed circuit board assembly including reading assembly drawings, Bill of Materials and written work instructions.

  • Must know how electronic components are oriented and distinguish the part numbers.

  • Understand the rules and requirements for proper handling of electronic components: Electrostatic Static Discharge (ESD).

  • The candidate needs to be familiar with Institute for Printed Circuit (IPC) standards for correct soldering and rework methods, including soldering fine pitch surface mount technology (SMT) and through hole components.

  • Ability to work up to 10 hours a day, 5 days a week and is flexible to work up to 10 hours a day, 5 days a week and weekends if necessary.

  • Good reading vision: ability to sit/stand for up to 10 hours.

  • Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required annually.

  • Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident.

  • Regular attendance is an essential function of this job.

Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level.

Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
CNC Turret Press Operator 1St Shift

TTM Technologies, Inc.

Posted 5 days ago

VIEW JOBS 3/24/2020 12:00:00 AM 2020-06-22T00:00 Scope: This position is responsible to operate the CNC Turret Punch and CNC Brake Presses and support the production team, including New Product Introduction. Plan, layout and perform fabricating and assembly operations on sheet metal products, operate machinery, punch, press or saw metal products to meet business demands. Produce a variety of parts to meet the dimensional specifications of the mechanical engineered drawings. Must be able to handle a fast-paced environmental with a high volume workload. Duties and Responsibilities: * Set-up and Operate a turret punch press and Brake Press. Prima Finn or Amada experience required (or like type of turret) * Understands program format, works from operational data defining and coding tooling and machine arrangements. * Arranges, mounts and secures tooling in turret. * Calls up program in machine control and correlates machine position with program * Manually cycles machine through operational sequence to check work holder positions, tooling, clearances and speeds. * Adjust machine from console to correct deviations from program specifications. * Ensures strict tolerance requirements are maintained in the manufacture of parts. * Recognizes, reports and works closely with programming personnel to correct errors. * Recommend tooling applications and operations sequence to assist in developing practical programming for new and unusual punching requirements. * Diagnose minor repairs * Perform first piece inspection. Segregates and reports defects produced. * Promotes and supports the maintenance of a safe, accident-free and healthy work environment * Supports and maintains machine maintenance procedures * Maintains tools library and recommends sharpening and maintenance of tools and guides. * Perform all other duties as assigned in other departments to meet business demands. * Follows all company Safety and ESD Program requirements. * Communicates regularly to supervisors/managers, suggests procedural changes, maintains a clean, safe work environment and communicates to supervisors/managers safety hazards and issues. * Properly handle and dispose all waste, including hazardous wastes that are generated in daily operations as directed by the EHS department. * Responsible to report all accidents, near misses, unsafe acts and unsafe conditions. Perform job duties utilizing the required and appropriate personal protective equipment (PPE).Full participation in safety training and the ability to understand and follow directions identified in the Job Safety Analysis (JSA)PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts. Essential Knowledge and Skills: * Good computer skills; experience with CADD program desired. * Previous experience in leadership role desired. * Good English communication skills, verbal and written. * Proven measurement and mathematical fraction/decimal conversion skills. Good math skills, including geometry and trigonometry. * Demonstrated experience working with varying degrees of precision and control in work. * Ability to read engineering drawings. * Solid working knowledge of sheet metal and welding techniques. * Skill in fabrication, installation and repair of sheet metal and related products or equipment. * Knowledge of tooling and tool maintenance. * Ability to list up to 50 pounds regularly. Ability to sit and/or stand for long periods of time, up to 9 hours a day. * Ability to train other operators to safely operate equipment and/or manufacturing systems. * Ability to follow written and verbal instructions; multitask and prioritize effectively. * Reliable, trustworthy, flexible. * Ability to work with limited supervision while meeting all product quality requirements. * Regular attendance is an essential job function for this position. * Ability to work extra hours beyond regular work schedule and is flexible to work weekends when necessary. * Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident. Education and Experience: * High school diploma or GED is required. Trade school or technical school preferred. * 2+ years experience as a set-up operator; operating and programming Amada/Prima-Finn/Haco or similar CNC Turret Punches and/or Brake Presses required. Export Statement: * Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level. TTM Technologies, Inc. Stafford Springs CT

Machine Solder Operator - 1St

TTM Technologies, Inc.