Long Products Rolling Mill Vacation Coverage Operator

North American Stainless Ghent , KY 41045

Posted 2 weeks ago

Perform a number of duties in the continuous mill that provide the mill the best opportunity to operate at an efficient level. Be able to perform the exit operator's duties at an adequate level during the absence of any of the continuous mill operators.

DUTIES

ESSENTIAL JOB FUNCTIONS:

SAFETY: provide a strong influence by self example that safety first is truly our behavior.

Have the ability to perform all of the exit operator duties

Operate fork lift while parking material properly.

Participate in preventive and breakdown maintenance, working closely with maintenance personnel in correcting equipment malfunctions, troubleshooting problems and maximizing equipment output.

Assist in pass and roll changes, product dimension changes, perform checks to mill equipment and guides during delays, assist in cobble removal.

Maintain adequate housekeeping in all work areas.

QUALIFICATIONS

MINIMUM EDUCATION, SKILLS AND EXPERIENCE:

Minimum High School degree or Equivalent (GED).

Working knowledge of all functions of the rolling mill equipment at this level and below in responsibilities.

Communication skills adequate to work closely and effetely with crew mates, shift leader, and group leader.

PHYSICAL ABILITIES REQUIRED:

Mobility in plant requires sitting, standing/walking

While performing the duties of this Job, the employee is regularly required to sit.

The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms.

The employee must occasionally lift and/or move up to 50 pounds.

Visual ability with or without correction.

Communication abilities.

Ability to work a rotating shift (rotating from days to nights on a weekly or bi-weekly schedule).

HEALTH AND SAFETY
1.Work in compliance with the Occupational Health and Safety Act and regulations.
2.Follow Company safety rules.
3.Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately.
4.Use or wear the equipment, protective devices or clothing that is required to be used or worn:

Safety shoes

Safety glasses

Hearing protection

Hard hat

Long sleeve shirts

Proper gloves for task at hand
5.Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy.
6.Must follow all Lock out Tag out (LOTO) guidelines for designated machines.
7.Maintain a clean and safe work area.

WORK ENVIRONMENT:
1.Work in compliance with the Occupational Health and Safety Act and regulations.
2.Clean, well ventilated and safe work areas.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Cold Rolling Floater

North American Stainless

Posted 5 days ago

VIEW JOBS 4/14/2019 12:00:00 AM 2019-07-13T00:00 GENERAL JOB DESCRIPTION: The ZM/CR Floating Operator is respnsible for all of the operating functions listed blow for the Zmill, SKP2, mill and the Grind and Polish lines. Operations of these mills and lines must be understood in total, with the focus of utilizing the equipment to meet all the quality and and productive goals as outlined in our quality system. All functions of these units are to be carried out as described in the work instructions for that unit. ZMILL ESSENTIAL JOB FUNCTIONS: * Check the coil to be ran for proper identification which corresponds to the program. * Load coils onto either the payoff reel or tension reel * Feed the coil through the mill to the opposite tension reel * to know how and whn to insert the work roll into the kill per the rolling schedule * do periodic gauge referencing durning the rolling process * Inspect both the top and bottom face of the strip for rolling defects. Change any rolls, hose wipers, ect. to insure the quality of teh strip * Insert paper into the coil during the last pass * Remove interleaving paper or plastic as required * Remove coil from the tension reel, band and indentify per the work instuction * Operate the crane when working at ZM3, ZM4, and ZM5 SKIN PASS 2 ESSENTIAL JOB FUNCTIONS: * Coordinate movement with the crane operator for coil and roll movement * Communication roll necessities with the roll grinding department * Change rolls in the mill box * Grease the mill unit as specified in the Work Instruction * Perform daily checks as specified on appropriate checklist * Utilize all diagnostics as necessary * Utilize paper interleaving as per work instruction * Perform maintenance work as assigned * Maintain proper housekeeping throughout the entire work area SKIN PASS 2 SUPPLEMENTAL JOB FUNCTIONS: * Coordinate coil and roll movement with the crane operators * Change the rolls in the mill box as necessary * Grease the mill as indicated in the work instruction * Perform daily checks as appropriate checklist indicates * Mix batch rolling emulsion soultion * Perform maintence work as assigned * Maintain proper housekeeping throughout the entire work area GP LINE ESSENTIAL JOB FUNCTIONS: * Check the coil to be ran for teh proper identification which corresponds to the program * Check AS-400 foro scheduled coils proper payoff direction and communicate that to the crane operator * Load coils onto teh payoff reel, remove the bands and feed tehb coil to the welder * Remove any damage off the head or tail of the coil * Weld the head of teh new coil to the tail of the existing coil * Monitor the strip while running for proper centering, quality and damage. Notifying the exit operator if there are any abnormalities * Catch interleaving paper breaks and restart the paper * Operate the crane when working at GP2 GP LINE SUPPLEMENTAL JOB FUNCTIONS: * Change out rolls as needed * Monitor and dump swarf system as necessary * Coordinate coil and roll movements with the crane operators * Fill the water softner brine tank per work instruction * Maintain proper housekeeping throughout the entire work area * Perform maintenance task as assigned * Follow all prescribed safety rules MINIMUM EDUCATION, SKILLS AND EXPERIENCE: * High school degree or equivalent (GED) PHYSICAL ABILITIES REQUIRED: * Stand (stantionary) 15%, stand/walk 35%, walking 10%, sitting 40% * Strength and Agility: Lifting up to 100 lbs, carrying 70 lbs over a distance of 10 feet, pushing and pulling 100 lbs, occasional climbing, bending, twisting, kneeling, turning, stooping, crouching, balancing and crawling * Dexterity: Grasping (firm/strong) and reaching * Mobility in plant * Visual ability with or without correction * Ability to work rotating shifts ( rotating from days to nights on a weekly or biweekly schedual) * communication abilities HEALTH AND SAFETY * Work in compliance with the Occupational Health and Safety Act and regulations. * Follow Company safety rules. * Report the absence of or defect in any protective equipment or clothing to the Supervisor or Manager immediately. * Use or wear the equipment, protective devices or clothing that is required to be used or work * Safety shoes * Safety glasses * Hearing protection * Report to the Safety Coordinator, Group Lead or Supervisor any contravention of the Occupational Health and Safety Act and Regulations or Company policy * Must follow all Lock out Tag out (LOTO) guidelines for designated machines. * Maintain a clean and safe work area. WORK ENVIRONMENT: * Maintain clean, organized, well ventilated and safe work areas * Handle, store and dispose of hazardous materials in compliance with enviromental regukations and company policy North American Stainless Ghent KY

Long Products Rolling Mill Vacation Coverage Operator

North American Stainless