Lead Interdisciplinary

Department Of Defense Huntington , WV 25706

Posted 2 months ago

  • Duties

Help

Duties

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This position is in the USACE Inland Navigation Design Center (INDC) with multiple duty locations.

A highly desired engineer will hold a current Professional Engineering (PE) certification for this position.

Learn more about this agency

Responsibilities

  • Serve as a Technical Lead for USACE Mega Projects that include cost, time, national significance, unique and overlapping dependencies that required enhanced management controls.

  • Leads the INDC team in developing designs and project execution documents for USACE Mega Projects.

  • Directs and coordinates the workload of INDC technicians and lower graded engineers and/or A-E firms and consultants in the development of projects for USACE Mega Projects and sub-projects.

  • Consults and coordinates with internal and external agencies relative to the problems that occur throughout the course of the Mega Project, and renders opinions and recommendations as needed.

  • Compiles difficult special engineering reports and technical correspondence concerning overall INDC work and functions.

  • Communicates mission requirements, vision and values to successfully execute the mission objectives.

Travel Required

50% or less

  • You may be expected to travel 25% or more for this position.

Supervisory status

No

Promotion Potential

None

  • Job family (Series)

0810 Civil Engineering

0830 Mechanical Engineering

0850 Electrical Engineering

Similar jobs

  • Architectural Engineers

  • Civil Engineers

  • Electrical And Electronics Engineers

  • Electrical Engineers

  • Engineers, Architectural

  • Engineers, Civil

  • Requirements

Help

Requirements

Conditions of Employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.

  • Two year trial/probationary period may be required.

  • You will be required to provide proof of U.S. Citizenship.

  • This is an Army Acquisition, Logistics and Technology Workforce position.

  • Selectees must meet position requirements for certification at Level III in the Acquisition Career Field, Facilities Engineering within 24 months of entrance on duty.

  • Must possess a valid State motor vehicle operator's license for the class of vehicle being operated based on site specific, job related requirements, and must maintain this license.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Lead Interdisciplinary Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1.Professional registration or licensure

  • Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2.Written Test

  • Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3.Specified academic courses

  • Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4.Related curriculum

  • Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes performing civil works engineering on mega projects, or large navigation projects; and engineering management, such as design budget, scheduling, and deliverables; leading a team in the design and execution of projects; and managing and coordinating work with a variety of entities both internal and external to the district to include public interests. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Interdisciplinary Mechanical Engineer Or Civil Engineer (Geotechnical) Or Geologist

Department Of Defense

Posted 2 months ago

VIEW JOBS 10/9/2020 12:00:00 AM 2021-01-07T00:00 * Duties Help Duties Summary About the Position: This position is located in the Geotechnical and Water Resources Engineering Branch Dam and Levee Engineering Section, Huntington, WV If you do not meet one of the eligibility requirements under "Who May Apply", please apply against announcement SWGJ207743900154HW, which is open to all U.S. citizens. Learn more about this agency Responsibilities * You will lead field inspections and technical teams performing risk assessments on flood damage reduction projects. * You will be a Team Lead responsible for technical products, correspondence, recommendations, and reporting on assigned projects. * You will utilize critical thinking to develop risk informed recommendations for local sponsors. * You will facilitate the structural inspections of levees and appurtenant structures. * You will conduct site inspections, field reconnaissance, flood surveillance, and emergency response for both federally and locally operated and maintained levee systems. * You will consult and provide advice on technical issues for both management and local sponsors. * You will develop risk communication materials to promote and facilitate risk awareness and dialogue with local sponsors and stakeholders. Travel Required 50% or less - Business Travel up to 50 Percent Supervisory status No Promotion Potential None * Job family (Series) 0810 Civil Engineering 0830 Mechanical Engineering 1350 Geology Similar jobs * Architectural Engineers * Civil Engineers * Engineers, Architectural * Engineers, Civil * Engineers, Mechanical * Engineers, Structural * Requirements Help Requirements Conditions of Employment * Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation. Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. * Current Department of Army Civilian Employees * Current Permanent Department of Defense (DOD) Civilian Employee (non-Army) * Executive Order (E.O.) 12721 * Interagency Career Transition Assistance Plan * Land Management Workforce Flexibility Act * Military Spouses, under Executive Order (E.O.) 13473 * Non-Department of Defense (DoD) Transfer * Office of Personnel Management (OPM) Interchange Agreement Eligible * People with Disabilities, Schedule A * Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible * Reinstatement * Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Geologist: A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. OR B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education.(Note:Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.) In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes planning and developing inspection programs to include encompassing earth, rock, concrete reservoir dams, and other appurtenant structures. Study project characteristics such as instrumentation data, survey reports, manuals etc. to verify structural adequacy of civil/military structures. Site inspection visits for civil/military structures; complete a variety of reports such as a condition and evaluation reports. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Education You will be evaluated on the basis of your level of competency in the following areas: * Customer Service * Inspection Management * Problem Solving * Technical Competence Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11). To be referred, applicants must meet applicable time-in-grade and specialized experience requirements within 30 calendar days after the closing date of the announcement. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html Department Of Defense Huntington WV

Lead Interdisciplinary

Department Of Defense