Sorry, this job is no longer accepting applications. See below for more jobs that match what you’re looking for!

Laborer Helper 1

Expired Job

Chicago Bridge & Iron Company Plaquemine , LA 70764

Posted 2 months ago

Job Overview:

Prepares site for daily work, performs all housekeeping and duties necessary for daily activities.

Key Responsibilities/Accountabilities:

  • Operate jackhammers and drills to break up concrete or pavement.

  • Position, join, align and seal structural components, such as concrete wall sections and pipes.

  • Shovel cement and other materials into portable cement mixers: and mix, pour, and spread concrete.

  • Signal equipment operators to facilitate alignment, movement and adjustment of machinery, equipment, and materials.

  • Smooth and finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.

  • Tend to machines that pump concrete, grout, and sand.

  • Tend to pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials such as asphalt.

  • Lubricate, clean and repair machinery, equipment, and tools.

  • Operate, read, and maintain air monitoring and other sampling devices in confined and/or hazardous environments.

  • Assisting build and positioning forms for pouring concrete, and dismantle forms after use, using saws, hammers, nails, or bolts.

  • Clean and prepare construction sites to eliminate possible hazards, while following all waste handling guidelines.

  • Control traffic passing near, in, and around work zones.

  • Dig ditches or trenches, backfill excavations, and compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, and rakes.

  • Erect and disassemble scaffolding, shoring, braces, traffic barricades, ramps and other temporary structures.

  • Load, unload, and identify building materials, machinery, and tools, and distribute them to the appropriate locations, according to project plans and specifications.

  • Act as a watch when welding or metal cutting is performed by craft workers.

  • Expedites materials and equipment to work locations and sets up work sites.

  • Completes records, maintains tools and equipment, and performs various janitorial activities.

  • Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment.

  • Performs other duties as required.

Basic Qualifications:

  • 0-12 months of documented field experience in chosen craft discipline.

  • Able to perform some support tasks with close supervision/direction and support.

  • Must have the ability to read and interpret instructions and documentation.

  • The degree of job responsibilities and requirements may vary depending on months of experience.

Desired/Preferred Qualifications:

  • Read and interpret plans, instructions, and specifications to determine work activities.

  • Plan work and select proper tools.

  • Compare and see differences in the size, shape and form of lines, figures and objects.

  • Visualize objects in three dimensions from plans and drawings.

  • Make decisions based on measurable criteria.

  • Work at heights without fear.

  • Has knowledge of commonly used concepts, practices and procedures within the field.

  • Relies on instructions and pre-established guidelines to perform the functions of the job.

  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgement. Typically reports to a supervisor or manager.

Physical Requirements:

NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)

Standing

C

Walking

O

Sitting

O

Pushing
70 ft-lb

Pulling
70 ft-lb

Climbing

F

Balancing

F

Bending

Stooping

Kneeling

O

Crouching

F

Crawling

O

Reaching

C

Handling

C

Fingering

F

Feeling

Vision

Hearing

Lifting (lbs)

Carrying (lbs)
0-10
0-10
10-25
10-25
25-50
50
25-50
50


See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Laborer Helper 2

Chicago Bridge & Iron Company

Posted 2 days ago

VIEW JOBS 11/18/2018 12:00:00 AM 2019-02-16T00:00 Job Overview: Prepares site for daily work, performs all housekeeping and duties necessary for daily activities. Key Responsibilities/Accountabilities: * Operate jackhammers and drills to break up concrete or pavement. * Position, join, align and seal structural components, such as concrete wall sections and pipes. * Shovel cement and other materials into portable cement mixers: and mix, pour, and spread concrete. * Signal equipment operators to facilitate alignment, movement and adjustment of machinery, equipment, and materials. * Smooth and finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools. * Tend to machines that pump concrete, grout, and sand. * Tend to pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials such as asphalt. * Lubricate, clean and repair machinery, equipment, and tools. * Operate, read, and maintain air monitoring and other sampling devices in confined and/or hazardous environments. * Assisting build and positioning forms for pouring concrete, and dismantle forms after use, using saws, hammers, nails, or bolts. * Clean and prepare construction sites to eliminate possible hazards, while following all waste handling guidelines. * Control traffic passing near, in, and around work zones. * Dig ditches or trenches, backfill excavations, and compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, and rakes. * Erect and disassemble scaffolding, shoring, braces, traffic barricades, ramps and other temporary structures. * Load, unload, and identify building materials, machinery, and tools, and distribute them to the appropriate locations, according to project plans and specifications. * Act as a watch when welding or metal cutting is performed by craft workers. * Expedites materials and equipment to work locations and sets up work sites. * Completes records, maintains tools and equipment, and performs various janitorial activities. * Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. * Performs other duties as required. Basic Qualifications: * 12-18 months of documented field experience in chosen craft discipline. * Able to perform some support tasks with close supervision/direction and support. * Must have the ability to read and interpret instructions and documentation. * The degree of job responsibilities and requirements may vary depending on months of experience. Desired/Preferred Qualifications: * Read and interpret plans, instructions, and specifications to determine work activities. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. * Has knowledge of commonly used concepts, practices and procedures within the field. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Works under immediate supervision. Primary job functions do not typically require exercising independent judgement. Typically reports to a supervisor or manager. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking O Sitting O Pushing 70 ft-lb Pulling 70 ft-lb Climbing F Balancing F Bending Stooping Kneeling O Crouching F Crawling O Reaching C Handling C Fingering F Feeling Vision Hearing Lifting (lbs) Carrying (lbs) 0-10 0-10 10-25 10-25 25-50 50 25-50 50 Job Overview: Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. The role of a Foreman is to assist the General Foreman in providing leadership, direction and supervision of craft workers; to provide coordination in order that crafts work in a safe and productive manner. They evaluate, monitor and report on work progression, whilst ensuring that all works are conducted in compliance and in line with man-hour budget. This person is to have a full working knowledge of their craft sector, to be aware of industry/legislative changes, safety protocols, relevant certifications (for personnel or equipment). Key Responsibilities/Accountabilities: * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated * Selects, loads, and hauls job material to work site * Prepares layout of form or fixture to be fabricated using lines or grades * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes * Verifies accuracy of structure with transit, plumb bob, square and level * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars * Nails cleats (braces) across boards to construct concrete-supporting forms * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls * Erects frame work for structures and lays sub-flooring * Cuts and assembles timbers to build trestles and cofferdams * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways * Constructs forms, chutes, and aligns form panels for pouring concrete and grout * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts * Performs minor maintenance or cleaning activities with tools and equipment * Ability to tie rebar * Operation of electric and pneumatic tools * May rig materials * May mix cement or epoxy grouts using concrete mixing machine or hoe * Signals the concrete deliverer to position truck to facilitate pouring * May build or reinforce forms or bracing prior to pours * Loads, transports and unloads tools, equipment and supplies * Spreads concrete to specified depth and workable consistency, using a float to bring water to surface and produce soft topping * Levels, smooths and shapes surfaces of freshly poured concrete, using straight edge and float or power screed * Finishes concrete surfaces using power trowel or wets and rubs concrete with abrasive stone to specified finish * Remove rough or defective spots from concrete surfaces, power grinder or chisel and hammer and patches holes with fresh concrete or epoxy compound * Spray cement mortar or concrete to cover exposed earth, masonry, and steel surfaces and forcing grout into drilled holes or spaces between foundations. * Molds expansion joints and edges using edging tools, jointers and straight edge * May direct sub-grade work and setting of forms * Assists in lifting, positioning and securing of materials and work pieces * Perform minor maintenance and cleaning activities with tools and equipment * Responsible for observing and complying with all safety and project rules. * Performs other duties as required * Plan and coordinate labor requirements. * Evaluating performance against schedule. * Closing out Punch list items as allocated. * Advising General Foreman of any issues, impacts, risks or potential costs (financial or time). * Maintaining and updating short range look ahead. * Maintain and monitor company and project specific HSE plans, ensuring awareness and compliance is asserted. * Monitors and reports on cost and man-hour budgets. Basic Qualifications: * NCCER or equivalent certification with relevant experience. * Minimum of 12 months documented field experience at Journeyman 3 level in chosen craft discipline. * Must have the ability to read and interpret instructions and documentation. * Experience in maintaining short range look ahead plans. * Experience in monitoring cost and man-hour budgets. Desired/Preferred Qualifications: * Work within precise standards of accuracy * Rate information using standards which can be measured or checked * Compare and see differences in the size, shape and form of lines, figures and objects * Observe flat drawings or diagrams and understand how they would look as solid objects * Apply basic mathematical skills * Follow oral and written directions * Work at heights without fear. * Basic understanding of IT systems, including: Email, MS Office (Excel), etc. * Communication skills, both verbal and written. * Experience in adhering to, monitoring and implementing project HSE policies. * Must supply own tools appropriate for basic tasks. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking O Sitting O Pushing 80 ft-lb Pulling 80 ft-lb Climbing F Balancing O Bending Stooping F Kneeling O Crouching F Crawling F Reaching C Handling C Fingering O Feeling Vision Hearing Lifting (lbs) Carrying (lbs) 0-10 0-10 10-25 10-25 25-50 35 lb 25-50 35 lb Job Overview: Positions and secures steel bars in concrete forms to reinforce concrete. The role of a Lead Foreman is to assist the General Foreman in providing leadership, direction and supervision of craft workers; to provide coordination in order that crafts work in a safe and productive manner. They evaluate, monitor and report on work progression, whilst ensuring that all works are conducted in compliance and in line with man-hour budget. This person is to have a full working knowledge of their craft sector, to be aware of industry/legislative changes, safety protocols, relevant certifications (for personnel or equipment). Key Responsibilities/Accountabilities: * Determines number, size, shape and locations of reinforcing rods from blueprints, sketches or oral instructions. * Positions and secures steel bars in concrete forms to reinforce concrete. * Selects and places rod in forms; spacing and fastening them together using wire and pliers. * Cuts bars to required lengths, using hacksaw, bar cutters or acetylene torch. * Bend steel rods with hand tools or rod bending machine. * Reinforces concrete with wire mesh. * May reinforce concrete with wire mesh. May weld reinforcing bar together, using arc-welding equipment. * Insures that all reinforcing material is in its proper position, so it receives its intended structural load. * Loads, transports, unloads material, tools, equipment and supplies. * May assist in lifting, positioning and securing of material and work pieces during installation. * May perform minor maintenance or cleaning activities of tools and equipment. * Responsible for observing and complying with all safety and project rules. * Performs other duties as required * Plan and coordinate labor requirements. * Evaluating performance against schedule. * Closing out Punch list items as allocated. * Advising General Foreman of any issues, impacts, risks or potential costs (financial or time). * Maintaining and updating short range look ahead. * Maintain and monitor company and project specific HSE plans, ensuring awareness and compliance is asserted. * Monitors and reports on cost and man-hour budgets. Basic Qualifications: * NCCER or equivalent certification with relevant experience. * Minimum of 12 months documented field experience at Journeyman 3 level in chosen craft discipline. * Must have the ability to read and interpret instructions and documentation. * Experience in maintaining short range look ahead plans. * Experience in monitoring cost and man-hour budgets. Desired/Preferred Qualifications: * Work within precise limits or standards of accuracy. * Rate information us' standards which can be measured or checked. * Compare and see differences 'in the size, shape and forms of lines, figures and object. * Look at blueprints, drawings or pictures and understand how they would look as solid objects with height, width or depth. * Apply basic mathematical skills. * Follow oral and written directions. * Basic understanding of IT systems, including: Email, MS Office (Excel), etc. * Communication skills, both verbal and written. * Experience in adhering to, monitoring and implementing project HSE policies. * Must supply own tools appropriate for basic tasks. Company Overview: McDermott is a premier, fully integrated provider of technology, engineering and construction solutions to the energy industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and technology solutions—from the wellhead to the storage tank—to transport and transform oil and gas into the products the world needs today. Other Details: If applicable to the project, etc. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking O Sitting O Pushing 80 ft-lb Pulling 80 ft-lb Climbing F Balancing F Bending Stooping F Kneeling O Crouching F Crawling F Reaching F Handling C Fingering O Feeling Vision Hearing Lifting (lbs) Carrying (lbs) 0-10 0-10 10-25 10-25 25-50 40 lb. 25-50 40 lb. Company Overview: McDermott is a premier, fully integrated provider of technology, engineering and construction solutions to the energy industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and technology solutions—from the wellhead to the storage tank—to transport and transform oil and gas into the products the world needs today. Chicago Bridge & Iron Company Plaquemine LA

Laborer Helper 1

Expired Job

Chicago Bridge & Iron Company