Interdisciplinary Community Planner/ General Eng/ Architect/ Civil Eng/ Industrial Eng

Department Of The Navy Fort Walton Beach , FL 32549

Posted 2 days ago

  • Duties

Help

Duties

Summary

The selectee for this position will be located in Camp Lemonnier, Djibouti, Africa of . This position is 100% TDY to Camp Lemonnier.NAVAL FACILITIES ENG COMMAND ATLANTIC.

Learn more about this agency

Responsibilities

  • Evaluate engineering and architectural items (e.g., designs, drawings, specifications, supporting documents) to determine effectiveness in meeting requirements of shore establishment projects.

  • Coordinate construction operations between a contractor and an organization or client to verify project completion within established timeframes.

  • Develop solutions to resolve project conflicts and disagreements revolving around scope, criteria, regulatory requirements, technical architect-engineer problems, and areas of responsibility.

  • Discuss architectural and engineering project information with customers to assess their needs.

  • Incumbent participates and/or leads planning teams to develop long, mid, and short range land use/infrastructure planning.

  • Processes space management requests and site approval processes for the Installation.

  • Serves as a facilities planning criteria expert for the Dept of the Navy, providing criteria guidance to users throughout the Navy, Marine Corps in interpreting and applying UFC-2-000-05N criteria to facilities planning actions and Basic Facility Requirement generation.

  • Must be able to explain and defend specific planning criteria to users and to other technical experts and auditors and serve as a technical expert in facilities planning criteria.

  • Responsible for providing the client with clear and concise policy and guidance for the orderly and cost effective development of shore facilities.

  • Develops and reviews MILCON and special project documents, which requires knowledge of the MILCON and Special Project processes and detailed cost estimating.

Travel Required
76% or greater

  • This position is 100% TDY to Camp Lemonnier, Djibouti, Africa. You will be expected to travel up to 76% of the time.

Supervisory status

No

Promotion Potential
13

  • Job family (Series)
    0020 Community Planning
    0801 General Engineering
    0808 Architecture
    0810 Civil Engineering
    0896 Industrial Engineering

  • Requirements

Help

Requirements

Conditions of Employment

  • Must be a US Citizen.

  • Must be determined suitable for federal employment.

  • Must participate in the direct deposit pay program.

  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.

  • Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Providing planning recommendations for construction, demolition, energy, maintenance and facilities development projects; 2) Reviewing engineering/architectural drawings or specifications for construction, demolition, energy, maintenance, facilities development projects to identify inconsistencies; 3) Using planning systems and automated databases to capture spatial or geographic data to support facility planning.

Additional qualification information can be found from the following Office of Personnel Management website:

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0000/community-planning-series-0020/

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/civil-engineering-series-0810/

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/industrial-engineering-series-0896/

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Must be able to obtain an interim and/or final secret security clearance prior to entrance on duty AND must be able to maintain the required level of clearance while employed in the subject position. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.

This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA) and requires additional education, training and experience. This position has been identified as a Career Field

  • Facilities Engineering - at Level III. If you possess DAWIA Certification, please indicate your Certification Level and Career Field information in your resume. Applicants not certified may still apply and be selected, but must achieve certification within 24 months of appointment. Certification requirements may be viewed at http://icatalog.dau.mil/onlinecatalog/CareerLvl.aspx

This position is 100% TDY and requires travel, up to 75% of the time from normal duty station to CONUS and OCONUS and may include remote or isolated sites. Must be willing and able to travel on military and commercial aircraft for extended periods of time.

Selectee will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.

Selectee must obtain and maintain a current valid United States driver's license.

This position is covered by the Department of Defense Priority Placement Program.

Additional vacancies may be filled by this announcement.

Referral Lists will be issued on an as needed basis as vacancies occur.

All eligibility, qualifications, and time-in-grade requirements must be met by the referral cut-off date.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center.

Physical Demands: The position is mostly office-related and sedentary; however, site and tenant visits may include working around and drinking water treatment plants and industrialized facilities where there are high noise levels, open tanks, controlled production processes, the work may require some physical exertion, such as walking over rough, uneven, sandy, or rocky surfaces during site visits and inspections of outdoor facilities and at construction locations. During the course of site visits, audits, and inspections at locations, such as wastewater treatment plants, the incumbent could happen upon areas with the presence of infectious bacteria, or emission of hydrogen sulfide or other noxious odors or toxic gases. Furthermore, work may require climbing heights, such as climbing to tops of storage tanks. Use of personal protective equipment (PPE) including, but not limited to, safety glasses and boots, hard hats, gloves and ear defenders may be required when performing site inspections or field work.

Work Environment: Camp Lemonnier, Djibouti, Africa is located in a harsh environmental setting with adverse weather conditions for many months of the year (excessive heat, humidity, and rain) and working in areas populated by poisonous snakes, plants, and/or insects, and contagious diseases and poor air quality, chemical handling areas, and damp and unheated spaces. The work may require extensive work shifts of 12-16 hours a day and more than a 5 day workweek. Generally, indoor work location has power, water, heating and air conditioning, although outages should be expected. The incumbent will be required to live on the camp, where living quarters are a container living unit (CLU), which may be very cramped with the requirement to share bathroom facilities. Initial living quarters may be a tent. Fatigue may occur from long work hours and uncomfortable living conditions.

The position may be required to provide immediate contingency support requiring a physical and immunizations deemed necessary for the environment in which this support is provided.

Incumbent is entitled to 30% Post Differential pay.

Potential benefits for working in Djibouti:

  • Ability to gain international work experience

  • Professional development by working in an area at the forefront of construction and community growth

  • High potential for overtime pay

  • Local Market Supplement (based on parent command location)

  • Imminent Danger Pay - $225/month (first 42 days)

  • Post Differential Allowance - currently 30% of base pay (beginning day 43+)

  • Free quarters and messing

  • Per Diem

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Eng Sr Prin SW

BAE Systems

Posted 2 months ago

VIEW JOBS 10/11/2019 12:00:00 AM 2020-01-09T00:00 Work as a member of a Radar System Software development team to develop Command and Control Interfaces, Real-time system control code, Radar Subsystem development, Range Control System and Graphics Package development. Candidate will develop code and unit tests to a documented design. In addition to the above activities the candidate will assist in other basic Software Engineering activities such as code reviews, and Software configuration management. PRIMARY DUTIES AND RESPONSIBILITIES: 1. Assists in development and evaluation of moderately complex software designs to reduce/identify design flaws that would cause defects. 2. Assists in preparing design documentation for moderately complex software designs in accordance with established software development processes and procedures. 3. Codes and unit tests moderately complex software units to a documented design. 4. Assist in the preparation of software engineering change orders, change proposals and corrective action reports. 5. Assist in evaluations/trade studies for software development tools. 6. Will follow the direction of Lead Software Engineer to Develop Radar System and Range Control System software components. BAE Systems Fort Walton Beach FL

Interdisciplinary Community Planner/ General Eng/ Architect/ Civil Eng/ Industrial Eng

Department Of The Navy