Insulator Journey 2

Mcdermott Corporation Arden , DE 19810

Posted 1 week ago

Job Overview:

Apply, remove, and repair insulation on equipment, pipes, ductwork, or other mechanical systems such as heat exchangers, hot and cold pipes, storage tanks and vessels, to help control noise and maintain temperatures.

Key Responsibilities/Accountabilities:

  • Reads and interprets blue prints, instructions, and other documentation or plan work activities.

  • Determines the amounts and selects required insulation material (in sheet, tubular, or roll form), such as fiberglass, foam rubber, Styrofoam, cork, or urethane, based on material's ability to retain heat, location, surface, shape, and equipment use.

  • Moves materials and equipment to work locations and sets up work site.

  • Cover, seal, or finish insulated surfaces or access holes with plastic covers, canvas strips, sealants, tape, cement or asphalt mastic.

  • Fit insulation around obstructions, and shape insulating materials and protective coverings as required.

  • Install sheet metal around insulated pipes with screws in order to protect the insulation from weather conditions or physical damage.

  • Measure and cut insulation for covering surfaces, using tape measures, handsaws, knives, and scissors.

  • Prepare surfaces for insulation application by brushing or spreading on adhesives, cement, or asphalt, or by attaching metal pins to surfaces.

  • Covers or seals insulation with preformed plastic covers, canvas strips, sealant, or tape to secure insulation to structure, according to type of insulation used and structure covered, using staple gun, trowel, paintbrush, or caulking gun.

  • Follows all hazardous waste handling guidelines.

  • May remove or seal off old asbestos insulation, following safety procedures.

  • Completes records, maintains tools and equipment, and performs various clean-up and housekeeping activities.

  • Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment.

  • Performs other duties as required.

Basic Qualifications:

  • NCCER certified.

  • Ability to read and interpret instructions and document, plan and perform work activities independently.

  • The degree of job responsibilities and requirements may vary depending on months of experience.

Desired/Preferred Qualifications:

  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.

  • Relies on instructions and pre-established guidelines to perform the functions of the job.

  • Works under immediate Supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.

  • Work within precise limits or standards of accuracy.

  • Apply shop mathematics to solve problems.

  • Plan work and select proper tools.

  • Compare and see differences in the size, shape and form of lines, figures and objects.

  • Visualize objects in three dimensions from plans and drawings.

  • Make decisions based on measurable criteria.

  • Work at heights without fear.

Other Details:

(If any) Paragraph format, single spacing

Physical Requirements:

NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)

Standing
70%

Walking
20%

Sitting
10%

Pushing
70ft-lb

Pulling
70ft-lb

Climbing

O

Balancing

F

Bending

Stooping

F

Kneeling

O

Crouching

F

Crawling

O

Reaching

C

Handling

C

Fingering

F

Feeling

Vision

Hearing

Lifting (lbs)

Carrying (lbs)
0-10
0-10
10-25
10-25
25-50
50lb
25-50
50lb

McDermott is apremier, fully-integrated provider of technology, engineering and constructionsolutions to the energy industry. For more than a century, customers havetrusted McDermott to design and build end-to-end infrastructure and technologysolutionsfrom the wellhead to the storage tankto transport and transform oiland gas into the products the world needs today


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Insulator General Foreman

Mcdermott Corporation

Posted 2 weeks ago

VIEW JOBS 3/7/2019 12:00:00 AM 2019-06-05T00:00 JobOverview: Apply,remove, and repair insulation on equipment, pipes, ductwork, or othermechanical systems such as heat exchangers, hot and cold pipes, storage tanksand vessels, to help control noise and maintain temperatures. Therole of a General Foreman is to assist the Superintendent in providingleadership, direction and supervision of craft workers; to provide coordinationin order that crafts work in a safe and productive manner. Theyplan, forecast and coordinate deliverables in line with quality, cost,specifications and industry standards. Thisperson is to have a full working knowledge of their craft sector, to be awareof industry/legislative changes, safety protocols, relevant certifications (forpersonnel or equipment). KeyResponsibilities/Accountabilities: * Reads and interprets blue prints,instructions, and other documentation or plan work activities. * Determines the amounts and selectsrequired insulation material (in sheet, tubular, or roll form), such as fiberglass,foam rubber, Styrofoam, cork, or urethane, based on material's ability toretain heat, location, surface, shape, and equipment use. * Moves materials and equipment to worklocations and sets up work site. * Cover, seal, or finish insulated surfacesor access holes with plastic covers, canvas strips, sealants, tape, cement orasphalt mastic. * Fit insulation around obstructions, andshape insulating materials and protective coverings as required. * Install sheet metal around insulatedpipes with screws in order to protect the insulation from weather conditions orphysical damage. * Measure and cut insulation for coveringsurfaces, using tape measures, handsaws, knives, and scissors. * Prepare surfaces for insulationapplication by brushing or spreading on adhesives, cement, or asphalt, or byattaching metal pins to surfaces. * Covers or seals insulation withpreformed plastic covers, canvas strips, sealant, or tape to secure insulationto structure, according to type of insulation used and structure covered, usingstaple gun, trowel, paintbrush, or caulking gun. * Follows all hazardous waste handlingguidelines. * May remove or seal off old asbestosinsulation, following safety procedures. * Completes records, maintains tools andequipment, and performs various clean-up and housekeeping activities. * Responsible for observing and complyingwith all safety and project rules, including wearing required personal safetyequipment. * Performs other duties as required. * Planand coordinate labor requirements. * Evaluatingperformance against schedule. * Closingout Punch list items as allocated. * AdvisingSuperintendent of any issues, impacts, risks or potential costs (financial ortime). * Creating,maintaining and updating short range look ahead. * Maintainand monitor company and project specific HSE plans, ensuring awareness andcompliance is asserted. * Liaise,coordinate and supervise subcontractors, ensuring they conform to siteoperations, safety specifics and project requirements. * Analyze and make independent recommendations regarding solutions toproblems with varying complexity in accordance with organization and/or projectobjectives and guidelines. * Monitorsand reports on cost and man-hour budgets. BasicQualifications: * NCCERor equivalent certification with relevant experience. * Minimumof 48 months documented field experience in chosen craft discipline, withminimum of 12 months experience at Foreman level. * Musthave the ability to read and interpret instructions and documentation. * Experiencein forecasting and planning of project requirements: equipment, materials, etc. * Experiencein creating short range look ahead for Foreman to execute. * Experience in monitoring cost and man-hour budgets. * Experience in executing the requirements and monitoring of theproject deliverables. Desired/PreferredQualifications: * Has knowledge of commonly-used concepts,practices, and procedures within a particular field. * Relies on instructions andpre-established guidelines to perform the functions of the job. * Works under immediate supervision. Primaryjob functions do not typically require exercising independent judgment. Typicallyreports to a supervisor or manager. * Work within precise limits or standardsof accuracy. * Apply shop mathematics to solveproblems. * Plan work and select proper tools. * Compare and see differences in the size,shape and form of lines, figures and objects. * Visualize objects in three dimensionsfrom plans and drawings. * Make decisions based on measurablecriteria. * Work at heights without fear. * Degreequalified in Construction or related topic beneficial but not required. * Basicunderstanding of IT systems, including: Email, MS Office (Excel), etc. * Communicationskills, both verbal and written. * Experience in executing, monitoring and updating of constructionschedules. * Experience in adhering to, monitoring and implementing project HSEpolicies. * Must supply own tools appropriate forbasic tasks. OtherDetails: Ifapplicable to the project, etc. PhysicalRequirements: NP=NotPresent, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking O Sitting O Pushing F Pulling F Climbing F Balancing F Bending O Stooping F Kneeling O Crouching F Crawling O Reaching C Handling C Fingering F Feeling F Vision F Hearing F Lifting (lbs) Carrying (lbs) 0-10 F 0-10 F 10-25 F 10-25 F 25-50 F 25-50 F McDermott is apremier, fully-integrated provider of technology, engineering and constructionsolutions to the energy industry. For more than a century, customers havetrusted McDermott to design and build end-to-end infrastructure and technologysolutions—from the wellhead to the storage tank—to transport and transform oiland gas into the products the world needs today Mcdermott Corporation Arden DE

Insulator Journey 2

Mcdermott Corporation