Heat Stress Technician Journey (Nights)

Mcdermott Corporation Hackberry , LA 70645

Posted 3 weeks ago

Job Overview:

Performs duties necessary to maintain appropriate temperatures

Key Responsibilities/Accountabilities:

  • Prepare heat bands and thermocouple placement for the pre-heat of piping welds.

  • Setup all leads to heat stress equipment.

  • Monitor preheat chart during welding operations and adjust equipment as needed.

  • Prepare heat bands and thermocouple placement for Post Weld Heat Treatment of welds and adjust equipment as needed.

  • Provide documentation (heat treatment temperature charts) to Quality personnel for inclusion into weld package.

Basic Qualifications:

  • Reads and interprets instructions and documentation and plans work activities.

  • Completes and maintains manual or computerized records, maintains tools and equipment, and performs various clean-up and housekeeping activities.

  • Responsible for observing and complying with all safety and project rules. Performs other duties as required

  • Work within precise limits or standards of accuracy.

  • Apply shop mathematics to solve problems.

  • Plan work and select proper tools.

  • Compare and see differences in the size, shape and form of lines, figures and objects.

  • Visualize objects in three dimensions from plans and drawings.

  • Make decisions based on measurable criteria.

Desired/Preferred Qualifications:

  • May require a high school diploma or its equivalent with previous years of experience in the field or in a related area.

  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.

  • Relies on instructions and pre-established guidelines to perform the functions of the job.

  • Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager.

Physical Requirements:

NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)

Standing

F

Walking

O

Sitting

O

Pushing

F

Pulling

O

Climbing

O

Balancing

F

Bending

O

Stooping

F

Kneeling

F

Crouching

O

Crawling

O

Reaching

O

Handling

C

Fingering

O

Feeling

C

Vision

C

Hearing

F

Lifting (lbs)

Carrying (lbs)
25-50
25-50

Company Overview:

McDermott is a premier, fully-integrated provider of technology, engineering and construction solutions to the energy industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and technology solutionsfrom the wellhead to the storage tankto transport and transform oil and gas into the products the world needs today.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Painter / Blaster Journey 1 3

Mcdermott Corporation

Posted 2 weeks ago

VIEW JOBS 4/10/2019 12:00:00 AM 2019-07-09T00:00 Job Overview: Paint walls, equipment, buildings, bridges, and other structural surfaces, using brushes, rollers, and spray guns. May remove old paint to prepare surface prior to painting. May mix colors or oils to obtain desired color or consistency. Key Responsibilities/Accountabilities: * Cover surfaces with drop cloths or masking tape and paper to protect surfaces during painting. * Selects and mixes coating additives to thin or promote drying and adhesion. * Fill cracks, holes, and joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives. * Uses high air-pressure sandblasting equipment, chemical application, chipping hammer, power tools and other abrasives to remove rust, grease, dirt, concrete, and old paint prior to paint application. * Apply primers or sealers to prepare surfaces, such as bare wood, metal, piping, fixtures, structures and equipment for finish coats. * Selects paint according to company color scheme and specifications. * Apply paint, stain, varnish, enamel, and other finishes to heavy equipment, buildings, bridges, and/or other structures, using brushes, spray guns, sandblasting equipment, or rollers. May use epoxy, latex or enamel coatings. * Calculate amounts of required materials and estimate costs, based on surface measurements and/or work orders. * Read work orders or receive instructions from supervisors or homeowners in order to determine work requirements. * Disassemble paint and sandblasting equipment and cleans equipment, using solvent, wire brushes, and dry cloth. * Erect scaffolding and swing gates, or set up ladders, to work above ground level. * Remove fixtures such as pictures, door knobs, lamps, and electric switch covers prior to painting. * Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly. * Mix and match colors of paint, stain, or varnish with oil and thinning and drying additives in order to obtain desired colors and consistencies. Respiratory protection is common and required in many applications. * Responsible for observing and complying with all safety and project rules. * Performs other duties as required. Basic Qualifications: * Craft certification or relevant certification with experience * Minimum of 6 months documented field experience at Helper 3 level in chosen craft discipline. * Ability to read and interpret instructions and document, plan and perform work activities independently. * The degree of job responsibilities and requirements may vary depending on months of experience. Desired/Preferred Qualifications: * Has knowledge of commonly-used concepts, practices, and procedures within a particular field. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Works under immediate supervision. * Primary job functions do not typically require exercising independent judgment. * Typically reports to a supervisor or manager. * Has knowledge of application techniques. * Work within precise limits or standards of accuracy. * Apply shop mathematics to solve problems. * Plan work and select proper tools. * Compare and see differences in the size, shape and form of lines, figures and objects. * Visualize objects in three dimensions from plans and drawings. * Make decisions based on measurable criteria. * Work at heights without fear. Other Details: If applicable to the project, etc. Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing F Walking F Sitting O Pushing NP Pulling NP Climbing F Balancing F Bending F Stooping F Kneeling O Crouching F Crawling O Reaching C Handling C Fingering C Feeling Vision Hearing Lifting (lbs) Carrying (lbs) 0-10 F 0-10 F 10-25 F 10-25 F 25-50 F 25-50 F Mcdermott Corporation Hackberry LA

Heat Stress Technician Journey (Nights)

Mcdermott Corporation