General Labor Pool Assembler

Johnson Controls INC Marinette , WI 54143

Posted 2 months ago

JOB REQUIREMENTS: General Labor (162142) Accumulation System 1.
Monitors the flow of parts from the Paint System discharge to the Fill System in feed.
2.
Makes system adjustments to transfer shells directly or to accumulate shells as required.
Fill Equipment 1.
Monitors equipment and controls of Fill and Material Handling System; regulates inputs (air dryer, compressor, chemical flow, vacuum pressure, etc.) and assists with the appropriate system adjustments.
2.
Inspects product and records results per First Article Instructions and/or Work Instructions if required; assists with the appropriate system adjustments as a result of the inspection process.
3.
Maintains equipment (vacuums equipment and area, cleans fill heads, etc.
performs required Preventative Maintenance, etc.) per Work Instructions.
4.
Assists with equipment change-overs for various model shells (units) and chemicals.
5.
Reworks rejected units and returns them to the system.
Pre-Test Equipment 1.
Manually loads/unloads units to the conveyors in the event of a Material Handling equipment breakdown.
2.
Occasionally performs material handling duties (restocking parts, removing pallets, etc.). 3.
Manually inserts head assembly and engages threads.
4.
Monitors equipment and controls of the auto Torqueing station (cycle times, torque parameters, etc.); manually verifies the torque of the head assembly per Work Instructions.
5.
Monitors the Torque "Gaping" station and assists with the necessary system adjustment to system.
6.
Monitors equipment and controls of the automatic Gassing station.
7.
Monitors gas mixture equipment and changes gas cylinder (banks) when required.
8.
Manually inserts Ring Pins into units.
9.
Manually assembles the Safety Tie.
10.
Verifies the pull force of the Safety Seal per Work Instructions.
11.
Monitors material handling system.
12.
Inspects product and records results per First Article Instructions and/or Work Instructions if required; assists with appropriate system adjustments as a result of the inspection process.
13.
Maintains equipment per Work Instructions and assists with appropriate system adjustments.
14.
Assists with equipment change-overs for various model shells (units). 15.
Restocks product component parts (Head Assemblies, Ring Pins, etc.) when required.
16.
Reworks rejected units and returns them to the system.
17.
Manually loads/unloads units onto/off the conveyor in the event of a Material Handling equipment breakdown.
18.
Occasionally performs material handling duties (restocking parts, removing pallets, etc.). Johnson Controls is a global multi-industrial company with core businesses in the automotive, building and energy storage industries.
Our 170,000 employees create quality products and services to optimize energy and operational efficiencies of buildings, energy storage and interior systems for automobiles.
Through our growth strategies and by increasing market share we are committed to delivering value to shareholders and making our customers successful.Johnson Controls, Inc.
is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability or any other characteristic protected by law.
If you are an individual with a disability and need assistance or accommodation during the application process please call and press option #0 or email . OTHER EXPERIENCE AND QUALIFICATIONS:
Must be willing to learn team skills and work in a team environment.
Daily routine requires being on your feet nearly 100% of the time, walking, standing, stooping or bending.
Must be able to lift, push and pull to remove extinguishers along the assembly line and pack extinguishers where average to heavy weight is involved.
Must be able to read, write, nd understand simple math and work from blueprints.
APPLICATION INSTRUCTIONS: Apply Online: ipc.us/t/777F8689E233499D Qualified females, minorities, and special disabled veterans and other veterans are encouraged to apply.


See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Assembler IiiSentry Final Assembly 2Nd Shift

Johnson Controls, Inc.

Posted 2 weeks ago

VIEW JOBS 11/7/2018 12:00:00 AM 2019-02-05T00:00 Johnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries. Our 117,000 employees create intelligent buildings, efficient energy solutions, integrated infrastructure and next generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities. Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat. We are committed to helping our customers win and creating greater value for all of our stakeholders through strategic focus on our buildings and energy growth platforms. For additional information, please visit www.johnsoncontrols.com or follow us @johnsoncontrols on Twitter. STATEMENT OF JOB "Final Assembly" operators set up, operate, monitor and maintain the equipment as well as the product processed through the Final Assembly area. ENVIRONMENTAL, HEALTH, AND SAFETY OBLIGATIONS Comply with the following Environmental, Health and Safety duties as a condition of employment: * Comply with safety rules * Attend and Participate in Safety Training * Participate actively in the safety process * Ask questions if something isn't known * Report all accidents and injuries immediately * Submit suggestions to improve safety * Know responsibilities in the event of an emergency (i.e. what to do in the event of an alarm for fire, chemical spills, tornados, etc.) * Be a coach to others who are acting unsafely * Must have Lock-out tags after 6 months * Attend and participate in all hazardous and non-hazardous waste trainings. * Ability to recognize chemical hazardous labels. * Spill management and clean-up. * Air shutoff locations. * Capability to follow satellite accumulation rules and requirements. * Proficiency to recognize hazardous wastes in your area and manage properly. QUALIFICATIONS Must be 18 years of age and have a HS Diploma or equivalent. Must be willing to learn team skills and work in a team environment. Daily routine requires being on your feet nearly 100% of the time, walking, standing, stooping or bending. Must be able to lift, push and pull to remove extinguishers along the assembly line and pack extinguishers where average to heavy weight is involved. Must be able to read, write, and understand simple math and work from blueprints. DUTIES Accumulation System 1. Monitors the flow of parts from the Paint System discharge to the Fill System in feed. 2. Makes system adjustments to transfer shells directly or to accumulate shells as required. Fill Equipment 1. Monitors equipment and controls of Fill and Material Handling System; regulates inputs (air dryer, compressor, chemical flow, vacuum pressure, etc.) and makes the appropriate system adjustments. 2. Inspects product and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process. 3. Maintains equipment (vacuums equipment and area, cleans fill heads, etc. performs required Preventative Maintenance, etc.) per Work Instructions. 4. Changes over equipment for various model shells (units) and chemicals. 5. Reworks rejected units and returns them to the system. Pre-Test Equipment 1. Manually loads/unloads units to the conveyors in the event of a Material Handling equipment breakdown. 2. Occasionally performs material handling duties (restocking parts, removing pallets, etc.). 3. Manually inserts head assembly and engages threads. 4. Monitors equipment and controls of the auto Torqueing station (cycle times, torque parameters, etc.); manually verifies the torque of the head assembly per Work Instructions. 5. Monitors the Torque "Gaping" station and makes the necessary system adjustment to system. 6. Monitors equipment and controls of the automatic Gassing station. 7. Monitors gas mixture equipment and changes gas cylinder (banks) when required. 8. Manually inserts Ring Pins into units. 9. Manually assembles the Safety Tie. 10. Verifies the pull force of the Safety Seal per Work Instructions. 11. Monitors material handling system. 12. Inspects product and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process. 13. Maintains equipment per Work Instructions and makes appropriate system adjustments. 14. Changes over equipment for various model shells (units). 15. Restocks product component parts (Head Assemblies, Ring Pins, etc.) when required. 16. Reworks rejected units and returns them to the system. 17. Manually loads/unloads units onto/off the conveyor in the event of a Material Handling equipment breakdown. Mass Spectrometer 1. Monitors equipment and controls of the Mass Spectrometer and handles rejected shells accordingly. 2. Monitors the Labeler equipment. 3. Maintains equipment and tools per Work Instructions. 4. Changes over equipment for various models. 5. Inspects shells (critical dimensions, visual checks) and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process. 6. Manually loads/unloads units onto/off of the conveyor in the event of a Material Handling equipment breakdown. 7. Occasionally performs material handling duties (restocking parts, removing pallets, etc.). Packaging System 1. Monitors equipment and controls of Packaging Machine, Print and Apply Labeler, Palletizing Machine, and Stretch Wrap Machine. 2. Manually places literature and hanger hook into cartons. 3. Maintains equipment performs required Preventative Maintenance per Work Instructions. 4. Changes over equipment for various models. 5. Inspects uncartoned and packaged units and records results per First Article Instructions and/or Work Instructions if required; makes appropriate system adjustments as a result of the inspection process. 6. Manually loads/unloads units onto/off of the conveyor in the event of a Material Handling equipment breakdown. 7. Occasionally performs material handling duties (restocking parts, removing pallets, etc.). Shell Wrangler (as needed) 1. Manually loads and unloads welded and painted shells from the conveyor in the Sentry Cell. 2. Assists the Sentry Cell painter by changing the paint posts as needed. 3. Performs housekeeping duties in area which includes cleaning shot from floor by paint line blaster. 4. Performs miscellaneous related duties as assigned by the Supervisor. Johnson Controls, Inc. Marinette WI

General Labor Pool Assembler

Johnson Controls INC