Field Service Technician III

Enerflex Williston , ND 58802

Posted 2 months ago

Position Summary

This position is responsible for performing basic to advanced maintenance functions, procedures, activities and responsibilities associated with working on gas compression packages with limited guidance. Duties include learning from and assisting other senior level technicians with servicing, troubleshooting, installation, and commissioning of both gas fired and electric driven compressor packages. The purpose of the Service Technician III level is to acquire proficiency in performing advanced maintenance, new equipment installation, and overhaul actions with limited supervision that will allow for progression to the Sr. Service Technical level.

Principle Responsibilities and Duties

  • Represents the company in a professional manner at all times while providing outstanding customer service that aligns with Enerflex visions and values.

  • Responsible for submitting accurate field service reports, expense reports, timesheets and other necessary paperwork daily.

  • Responsible for performance of the job activities in a manner consistent with the project goals and objectives.

  • Responsible for providing leadership and training to new, level I and level II Field Service Technicians.

  • Possess knowledge and ability to diagnose engine/compressor failures accurately and efficiently with limited guidance.

  • Independently diagnose engine/compressor failures accurately and efficiently.

  • All duties and responsibilities could include a large amount of (multi state) travel at short notice including nights, weekends, and holidays.

  • Ability to complete, accurate, and timely rebuilds/overhauls of compressors, engines and controls on gas compressor packages in the field in adverse conditions without supervision.

  • Responsible for accurate troubleshooting of electrical systems, basic controls, and unit control panels such as Murphy, and Altronic, and Allen Bradley.

  • Responsible for accurately competing basic engine tuning functions to adjust engine performance and emissions on multiple major OEM's. (CAT/Waukesha)

  • Possess knowledge and ability to respond and repair recurring problems and emergency services as needed independently.

  • Ability to independently assist installation of new units including commissioning and start-up inspections without supervision accurately.

  • Knowledge and ability to perform mechanical inspection using micrometers, pressure gauges, electronic diagnostic equipment and other specialty tools with little to no guidance.

  • Must be able to be on a call-out rotation and effectively make emergency repairs.

  • Must recognize and comply with Health, Safety and Environmental rules and policies that are applicable to each location.

  • Other Duties assigned by supervisor.

Qualifications

  • High school diploma or general education degree (GED) and some vocational/technical related experience preferred

  • Must have 10-15 years' applicable experience

  • Must have proof of certification from CAT/ Waukesha (or equivalent) to:

  • CAT Gas I

  • CAT Gas II

  • CAT Electrical

  • Ariel Basic

  • Ariel Mechanical

  • CAT 3500 ADEM III

  • CAT 3500 ULB

  • Waukesha VHP

  • CAT 3600 ADEM III

  • CAT 3600 Master Mechanic

  • CAT Failure Analysis

  • Waukesha 93990

  • Must also stay current on all updated OEM model specific training.

Working Conditions

While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and adverse outside weather conditions. The employee is occasionally exposed to high, precarious places and fumes or airborne particles. The noise level in the work environment is usually loud.

Physical Demand

While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly/frequently lift and/or move up to 25 pounds and Infrequently/occasionally lift and/or move up to 50 pounds using proper lifting techniques.

Enerflex is an Equal Opportunity Employer

Enerflex grants equal employment opportunity to all qualified persons without regard to race, color, sex, age, national origin, religion, genetic information, mental or physical disability, or any other characteristic protected by applicable federal, state, or local law. Equal employment opportunities are provided in recruitment, hiring, promotions, wages, benefits, and other terms, conditions, and privileges of employment.

Disclaimer

The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, tasks, duties, knowledge, skills, and abilities required.

Please visit our website at www.enerflex.com for more information.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Field Service Technician I

Enerflex

Posted 7 days ago

VIEW JOBS 10/9/2019 12:00:00 AM 2020-01-07T00:00 Position Summary This position is responsible for performing basic maintenance functions, procedures, activities and responsibilities associated with working on gas compression packages under direct supervision. Duties include learning from and assisting other senior level technicians with servicing, troubleshooting, installation, and commissioning of both gas fired and electric driven compressor packages. The purpose of the Service Technician I level is to acquire proficiency in performing all maintenance actions with direct supervision that will allow for progression to the Service Technician II level. Principle Responsibilities and Duties * Represents the company in a professional manner at all times while providing outstanding customer service that aligns with Enerflex visions and values. * Responsible for submitting accurate field service reports, expense reports, timesheets and other necessary paperwork daily. * Assists in diagnosing engine/compressor failures accurately and efficiently. * Assists in timely rebuilds/overhauls of compressors, engines and controls on gas compressor packages in the field in adverse conditions. * Assists with response to recurring problems and emergency services as needed. * Assists with installation of new units including commissioning and start-up inspections. * Assists with mechanical inspection using micrometers, pressure gauges, electronic diagnostic equipment and other specialty tools. * All duties and responsibilities could include a large amount of (multi state) travel at short notice including nights, weekends, and holidays. * Must be able to be on a call-out rotation and effectively make emergency repairs. * Provides input to Supervisor on personnel and materials needs to provide optimal job planning. * Must recognize and comply with Health, Safety and Environmental rules and policies that are applicable to each location. * Other Duties assigned by manager. Qualifications * High school diploma or general education degree (GED) and some minimal vocational/technical training preferred * Must have 3-5+ years applicable experience * Must have proof of certification from CAT/Waukesha (or equivalent) to: * CAT Gas I * CAT Gas II * CAT Electrical * Ariel Basic * Ariel Mechanical * Waukesha GE * Ability to pass a pre-employment drug screen, background check and post offer physical testing. * Valid motor vehicle driver's license * Possess strong mechanical and electrical abilities with knowledge and experience to perform complex multiple service and maintenance tasks. * Have his/her own tools of the trade. (With exceptions of specialty or OEM specific diagnostic equipment) * Capability to use CAT ET or equivalent for other OEM's. * Ability to interpret Compressor Performance and calculate engine horsepower. * Knowledge and understanding of how to use CAT Gas Engine Rating Pro (GERP) * Capability of performing monthly preventive maintenance and minor repairs independently. * Ability to provide preventative and corrective field mechanical service on gas compression, and/or production equipment on site at end user locations. * Demonstrate knowledge of proper purging and loading practices/procedures. * Identify and stop activities that are unsafe for personnel or the environment when they occur or about to occur. * Exhibit an ability to learn in both hands on and classroom setting. * Proficient with a personal computer and common applicable functions/programs (Word, Excel, and Outlook). * Basic understanding of Gas & Oil properties, conditions, and theories. * Basic understanding of Compressor and Production Equipment types, models, and theory of operation. * Possess Basic understanding of Installation, Assembly, Commissioning, Trouble Shooting and Repair procedures related to gas compressors and production equipment. * Thorough understanding of tooling utilized to install, maintain, and operate Gas Compressors and Production Equipment. (Dial indicators, laser alignment tools, feeler gauges, Digital volts Ohm meter, and, Hydraulic torqueing equipment). * Ability to decipher P&ID's, Blue Prints, Installation Instructions, and Technical Manuals. * Motivated self-starter capable of working independently with proper direction. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to write legible, routine correspondence and to speak effectively as well as coherently with management and other employees * Knowledge of materials, methods, and the tools involved in the construction or repair of basic engines. * Ability to understand and follow instructions furnished in written, oral, or diagram form. Working Conditions While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and adverse outside weather conditions. The employee is occasionally exposed to high, precarious places and fumes or airborne particles. The noise level in the work environment is usually loud. Physical Demand While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly/frequently lift and/or move up to 25 pounds and Infrequently/occasionally lift and/or move up to 50 pounds using proper lifting techniques. Enerflex is an Equal Opportunity Employer Enerflex grants equal employment opportunity to all qualified persons without regard to race, color, sex, age, national origin, religion, genetic information, mental or physical disability, or any other characteristic protected by applicable federal, state, or local law. Equal employment opportunities are provided in recruitment, hiring, promotions, wages, benefits, and other terms, conditions, and privileges of employment. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, tasks, duties, knowledge, skills, and abilities required. Please visit our website at www.enerflex.com for more information. Enerflex Williston ND

Field Service Technician III

Enerflex