Erj-170 Ground/Simulator Instructor

Flightsafety International Inc. Berkeley , MO 63134

Posted 4 months ago

Date: Mar 6, 2018

Location: St. Louis, MO, US, 63134

Company: FlightSafety International

Requisition 12029

Location: St. Louis LC (0019) St. Louis , Missouri 63134 , United States (US)

ESSENTIAL DUTIES AND RESPONSIBILITIES: The following duties are essential to the successful and satisfactory performance of this job. Teammates based at Learning Centers in the U.S. may be required to perform duties as contract instructors or check airmen which are considered "safety-sensitive" under 14 CFR Parts 121 and/or 135. Those hired into or transferred to safety-sensitive duties will be required to undergo a U.S. Department of Transportation-compliant Pre-employment Drug Screening; and be subject to random drug and alcohol testing as long as they are assigned safety-sensitive duties. FlightSafety Learning Centers provide training and support to Customer and Clients 24 hours a day, 7 days a week, 365 days a year. Learning Center instructors may be scheduled at varying times and days to support the Customer needs.

NOTE: The term "Program" can refer to the training program in its development, implementation, or evaluation stages.

Training Standards Program Activities: (Includes Compliance with regulations and guidelines, and Quality Management System (QMS) policies and procedures; plus Lesson Planning, Current Material and Set-up):

  • Maintain Instructor qualification in accordance with NOTE on the last page of this Job Description.

  • Maintain Instructor qualification in accordance with FlightSafety International's Quality Maintenance Systems (QMS) processes and procedures. (Refer to QWI-62-02-01)

  • Deliver training to FlightSafety International clients in accordance with FlightSafety International Instructor Performance Standards.

  • Develop, utilize, maintain and revise ground school lesson plans and Pilot Training publications in accordance with FlightSafety International Instructor Performance Standards.

  • Assist in completing and revising ground school syllabi and Expanded Instructor Action Guides (EIAGs)

  • Keep current all certificates, ratings and designations required to perform duties as a Simulator Instructor.

  • Deliver training to FlightSafety International clients in accordance with FlightSafety International Instructor Performance Standards.

Training Standards Instructor Activities: (Includes Compliance with regulations and guidelines, and QMS policies and procedures)

  • Maintain all training material (various media forms) in a current state at all times.

  • Prepare classroom and set up training materials no later than 15 minutes prior to scheduled class start time.

  • Ensure classroom equipment, flight training devices (FTDs) and scheduled simulators are ready for client training events.

  • Integrate Crew Resource Management (CRM)/Human Factors training with technical (procedural) training.

  • Utilize Customer's Standard Operating Procedures (SOPs), Checklists, and Minimum Equipment List (MEL) during training, when requested or required.

  • Attend scheduled Instructor meetings.

  • Provide pre-briefings and post-briefings before and after each Simulator lesson in accordance with FlightSafety International Instructor Performance Standards.

  • Prepare the Flight Simulator and/or briefing room no later than 15 minutes prior to the scheduled start of the Simulator lesson and/or pre-briefing session.

  • Assist in keeping all publications used in Simulator training current.

NOTE: Act as Second-in-Command for clients training in multi-crew aircraft who have come to training without a flying partner. In that capacity, will serve as a competent Second-in-Command and will not be performing instructional duties.

Documentation/Reports Activities:

  • Perform administrative duties relative to training such as preparing for the delivery of training, record keeping, monitoring customer progress, training development and maintenance of training programs.

  • Report to the Director of Training (DOT) any Customer training problems (poor

performance, Customer/Instructor conflicts, excessive tardiness, etc.)

  • Interact with Simulator Mx technicians concerning all Simulator functions and malfunctions as well as ensure all malfunctions are documented properly using appropriate forms.

Daily Responsibilities:

  • Maintain FlightSafety International's commitment to Customer satisfaction while performing job duties.

  • Interact within a cooperative environment through beneficial behavior, commitment to common goals, contribution to problem solving, communication of ideas and suggestions, and encouragement to other employees and departments.

  • Accountable for the security of FlightSafety International's materials, projects and business information regarding the methods and techniques used in the production and usage of FlightSafety International's products.

  • Accountable for the accuracy and completeness of assigned tasks.

  • Adhere to a required work schedule, including prompt and regular attendance.

  • Report, on a timely basis, any safety hazards observed in work area, equipment, and/or building to appropriate person(s) for correction.

  • Participate in the Quality Management System (QMS) activities at assigned site and adhere to the processes related to accomplishing the site's QMS goals.

  • Participate in Learning Center Safety Management Systems (SMS) activities including: supporting and promoting the safety culture, reporting all aviation safety-related via the feedback system, and adhering to the processes related to accomplishing SMS goals.

  • Support FlightSafety International's, and its subsidiaries', commitment to ethical behavior by basing our priorities on lawful and ethical conduct as we deal with co-workers, Customers, vendors and others in all of our operations.

QUALIFICATION REQUIREMENTS: The requirements listed below are representative of the knowledge, skill, and/or ability required.

EDUCATION AND/OR EXPERIENCE: (Minimum Requirements)

Associate's degree (A.A.) from a two-year college or technical school preferred, or three (3) years related experience and/or training; or equivalent combination of education and experience; equivalency years experience substitution must be in related field.

Minimum of six (6) months experience in a teaching/training environment, especially where the material is designed for adult (over 18 years old) participants, preferred.

Prior to hiring, the applicant for Ground Instructor must possess one of the following qualifications:

  • FAA Flight Instructor Certificate (CFI Certified Flight Instructor) (currency, not required); or

  • Ground Instructor Certificate with an instrument rating and an advanced rating (AGII); or

  • A rating equivalent to either of the above, issued by another country's aviation authority; or

  • Documented military Flight Instructor training and experience; or Documented experience as a pilot instructor in a Part 142, and/or 135/ 121 Air Carrier operations, or another country's aviation authority; or at least one (1) year's experience as a FlightSafety Maintenance Instructor (This qualification is valid only for teaching Aircraft Systems modules, and requires a waiver from the Regional Director Training Operations.) Other modules may also be approved, on a case-by-case basis.

Prior to hiring, the applicant for Flight Instructor (Simulator)/Synthetic Device Instructor must have the following certificates in his/her possession prior to the start of a simulator assignment.

If instructing in a simulator that represents an aircraft requiring a Type Rating, or if instructing in a course of training leading to the issuance of an Airline Transport Pilot (ATP) Certificate or an added rating to an ATP Certificate, the person must possess the following:

  • Airline Transport Pilot Certificate (ATP or Part 61.159/61.161, or 61.163 experience, as applicable) with appropriate category, class and type ratings, and

  • FAA Flight Instructor Certificate (CFI Certified Flight Instructor) (currency, not required); or

  • Ground Instructor Certificate with an instrument rating and an advanced rating (AGII); or

  • A rating equivalent to either of the above, issued by another country's aviation authority; or

  • Documented military Flight Instructor training and experience; or

  • Documented experience as a pilot instructor in a Part 142, and/or 135/ 121 Air Carrier operations, or another country's aviation authority; or If instructing in a simulator representing an aircraft not requiring a type rating or, instructing in a course of training not leading to the issuance of an Airline Transport Pilot Certificate (ATP), the person must possess the following:

  • Commercial Pilot Certificate with appropriate category, class, and instrument ratings and

  • FAA Flight Instructor Certificate (CFI Certified Flight Instructor) with appropriate category, and class (currency, not required); or

  • Ground Instructor Certificate with an instrument rating and an advanced rating (AGII); or

  • A rating equivalent to either of the above, issued by another country's aviation authority; or

  • Documented military Flight Instructor training and experience; or

  • Documented experience as a pilot instructor in a Part 142, 135 or 121 Air Carrier operations, or another country's aviation authority.

After hiring, the Simulator Instructor must complete the following:

  • In-Processing and Orientation, as documented in the Instructor Training File (ITF)

  • General and Administrative Training

  • Aircraft-Specific Ground and Simulator Training

  • Instructional Devices Training

  • Professional Instructor Course (PIC) (see QWI 62-02-01;02)

  • Simulator Observation Training

  • Practice instruction

  • Supervised Instruction

  • Instructor Certification/Designation

  • Flight/Simulator Instructor Evaluation

CERTIFICATES, LICENSES OR REGISTRATIONS:

See above for Certifications required.

Valid Driver's License, where applicable.

OTHER SKILLS AND ABILITIES:

Fluency in English, through both verbal and written communications; able to speak, understand, read and write

Excellent verbal, written communication skills

Excellent organizational skills

Ability to interact with various levels of management in a professional manner

Ability to adapt to changing schedules and high-pressure situations

A second language may be required in some Learning Centers to meet particular needs.

EQUIPMENT KNOWLEDGE AND SKILLS:

PC and/or compatible computer with printer

Various office equipment: FAX, Copier, and Multi-line Telephone

SOFTWARE KNOWLEDGE AND SKILLS:

General knowledge of the following software: MS Office; MS Access, preferred

Other software programs may be required, as needed.

PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands and work environment described here are representative of those that must be met and/or encountered by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee may be required to stand; walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell.

Must possess physical range of body motion to perform the following:
1.Reach, exert pressure and manipulate the rudder controls and/or anti-torque with both feet.
2.Reach and manipulate numerous controls within the Simulator device from the Instructor's chair.
3.Enter and exit from the Simulator device via the provided ramp.
4.With relative ease and quickness move between the Instructor station, projector screen and podium while instructing in the classroom.
5.Exit from malfunctioned Simulator while the device is in a severely pitched attitude.

Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

The employee must regularly lift and/or move up to 10 pounds, and frequently lift and/or move up to 25 pounds.

While performing the duties of this job, the employee frequently works near moving mechanical parts. The employee occasionally works in high, precarious places and in outside weather conditions and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, extreme cold, extreme heat, risk of electrical shock, risk of radiation, and vibration.

The noise level in the work environment is usually moderate.

FlightSafety is an Equal Opportunity Employer/Vet/Disabled.


Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove

Erj-170 Ground/Simulator Instructor

Flightsafety International Inc.