Sorry, this job is no longer accepting applications. See below for more jobs that match what you’re looking for!

Electronics Mechanic

Expired Job

Department Of Defense Kankakee , IL 60901

Posted 2 months ago

  • Videos

  • Duties

HelpDuties Summary


This National Guard position is for a ELECTRONICS MECHANIC, Position Description Number D0876000 and is part of the IL AASF 2, National Guard.

Learn more about this agency


As an ELECTRONICS MECHANIC, WG-2604-5/8/11, you will perform repair, maintenance, modification, overhaul and installation of complex electronic systems and/or a portion of a complete electronic integrated system involving work on a number of subsystems but not requiring the integration of all operable subsystems into a functional integrated system.

Major Duties

  • This is NOT an all-inclusive list:
  • Troubleshoots, inspects, installs, maintains, overhauls, repairs, and modifies complete operational systems consisting of numerous complex integral components.

  • Completes operational checks, inspections, tests and troubleshooting of line replaceable unit (LRU).

  • Accomplishes technical manual compliance and modification of components and systems.

  • Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE).

  • Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units.

  • Uses a variety of test equipment such as automated test equipment (ATE), oscilloscopes, multimeters, powermeters, combined Boresight Harmonization Kits, and special purpose bench test sets.

  • Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories,programmable read-only memories and various integrated circuits.

  • Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates materiel deficiency reports both on equipment and in technical data, and assists in design changes as necessary.

  • Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys.

Travel Required

Occasional travel

  • You may be expected to travel for this position.

Supervisory status


Promotion Potential

  • Job family (Series)
    2604 Electronics Mechanic

  • Requirements

HelpRequirements Conditions of Employment

  • NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

  • This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.

  • Selectee will be required to wear the military uniform.

  • Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.

  • Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.

  • Males born after 31 December 1959 must be registered for Selective Service.

  • Federal employment suitability as determined by a background investigation.

  • May be required to successfully complete a probationary period.

  • Participation in direct deposit is mandatory.

  • Indefinite position/ Temporary promotion.


Military Grades: Enlisted Only

  • May not exceed the rank of SFC

Compatible Military Assignments: 94, 15, 14G, 14H, 14T, 14Z, 25B, 25C, 25L, 25N, 25P, 25Q, 25R, 25S, 25T, 25W, 25X, 25Z, 91A, 91F, 91G, 91X, 91Z

Assignment to a compatible military position is not required for application but will be required if selected for appointment.

GENERAL EXPERIENCE: Experience or training which demonstrates the applicants knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.


  • Must have at least 18 months of experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. WG-08 Level

  • Musat have at least 12 months of Experience or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in using hand tools, power tools and gauges to make intricate repairs. Experience in using diagnostic and testing equipment. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications. WG-05 Level

  • Must have at least 6 months of Experience or training in performing simple mechanical installations and adjustments. Experience which demonstrates the applicant's ability to recognize obvious malfunctions. Experience using common hand tools. Experience that demonstrates the ability to follow written instructions.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.


This job does not have an education qualification requirement.

See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove

Mcdermott Corporation

Posted 2 months ago

VIEW JOBS 10/16/2018 12:00:00 AM 2019-01-14T00:00 Job Overview: Perform tasks involving physical labor at Kankakee warehouse.Under direct supervision of Site Manager, performs support to warehouse efforts ongeneral shop labor and maintenance tasks. Must have diesel engineexperience. Key Responsibilities/Accountabilities: * Troubleshoot, perform maintenance, and repairs to diesel, gas and electrically driven equipment.(mobile cranes, forklifts, generators, diesel welders, diesel air compressors, hydraulic hoists, electric air compressors, etc) * Knowledgeable in the procedures and safety measures in area(s) of specialty. * Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties and activities as required. * Keeps equipment available for use by completing preventive maintenance schedules; installing component and part upgrades; controlling corrosion; completing winterization procedures. * Complies with federal and state requirements by testing engine, safety, and combustion control standards * Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. * Corrects deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, fuel, emission, hydraulics; making adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units. * Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. * Disassembles and repairs defective equipment or systems. * Load, transport and unload material, tools, equipment and supplies. * Maintains tools and equipment. * Be able to distinguish colors. * Complete work orders to document repairs to equipment * Knowledge of certain procedures such as LOTO, etc. Responsible for observing and complying with all safety and project rules. Performs other duties as required. Basic Qualifications: * High School diploma or equivalent, valid driver's license with driving record within company established parameters 18 years of age or older * Ability to lift up to 50 pounds, ability to pass pre-employment physical and drug screen * Ability to work in an outdoor environment * Minimum 2- 5 years of experience Physical Requirements: NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%),C=Constantly (67-100%) Standing 70% Walking 20% Sitting 10% Pushing NP Pulling NP Climbing O Balancing F Bending F Stooping O Kneeling O Crouching O Crawling NP Reaching C Handling C Fingering F Feeling F Vision C Hearing F Lifting (lbs) Carrying (lbs) 0-10 F 0-10 F 10-25 F 10-25 F 25-50 O 25-50 O Company Overview: McDermott is apremier, fully-integrated provider of technology, engineering and constructionsolutions to the energy industry. For more than a century, customers havetrusted McDermott to design and build end-to-end infrastructure and technologysolutions—from the wellhead to the storage tank—to transport and transform oiland gas into the products the world needs today. Mcdermott Corporation Kankakee IL

Electronics Mechanic

Expired Job

Department Of Defense