Sorry, this job is no longer accepting applications. See below for more jobs that match what you’re looking for!

Critical Systems Building Engineer - Mechanical (Day Shift)

Expired Job

CB Richard Ellis Alpharetta , GA 30023

Posted 5 days ago

RESPONSIBILITIES

Utilizes advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

SUPERVISORY RESPONSIBILITIES

No formal supervisory responsibilities in this position. May provide informal assistance such as technical guidance and/or training to coworkers. May coordinate work and assign tasks.

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and EXPERIENCE

High school diploma or general education degree (GED) and a minimum of four years of related experience and/or trade school training.

CERTIFICATES and/or LICENSES

Universal CFC certification preferred. Additional certification in one or more of the following: electrical, mechanical, HVAC and refrigeration systems, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair. Certifications/licenses as may be required by local or state jurisdictions.

COMMUNICATION SKILLS

Ability to comprehend and interpret instructions, short correspondence, and memos and ask clarifying questions to ensure understanding. Ability to write routine reports and correspondence.

Ability to respond to common inquiries or complaints from clients, co-workers, and/or supervisor. Ability to effectively present information to an internal department and/or large groups of employees.

FINANCIAL KNOWLEDGE

Requires basic knowledge of financial terms and principles. Ability to calculate simple figures such as percentages.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situation where only limited standardization exists. Requires intermediate analytical skills.

OTHER SKILLS and ABILITIES

Uses personal computer and / or PDA for work order system, email, ESS and training. Basic skills with Microsoft Office Outlook. Physical requirements include stooping, standing, walking, climbing stairs / ladders and ability to lift / carry heavy loads of 50 lbs. or more.

SCOPE OF RESPONSIBILITY

Decisions made with general understanding of procedures and company policies to achieve set results and deadlines. Errors in judgment may cause short-term impact to co-workers and supervisor.

SAFETY

Responsible for personal safety and the safety of those who are affected by your work. This includes but is not limited to:

Complete all required and assigned HSE training at a satisfactory level

Follow all activity policies and procedures, including all HSE-related requirements at all times

Participate in all HSE-related programs & activities as required, including incident investigations, interviews, auditing and assessment, etc.

Report any conditions which you feel could result in an accident or injury and / or stop work if required



See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Mechanical Engineer

Geneva Aerospace

Posted 1 week ago

VIEW JOBS 11/11/2018 12:00:00 AM 2019-02-09T00:00 Mechanical Engineer We are a company of innovators, game changers, and entrepreneurs. As a prime contractor, we provide a broad range of communication, electronic and sensor systems used on military and commercial platforms across the globe. We embrace innovative and progressive ideas to advance our products for military and commercial customers. The Electronic Systems Segment (ESS) provides a broad range of aerospace systems, security and detection systems, and pilot training. L3 Aviation Products Division (L3 APD), is a leading provider of commercial and military avionics with unsurpassed performance, quality and customer support. L3 APD manufactures a diverse line of safety- and efficiency-enhancing products that set the standard for next-generation requirements, including configurable voice and data recorders, collision avoidance systems, navigation products, display systems and processors. Performs various mechanical engineering tasks in support of a wide variety of aviation/avionics products. Responsibilities include design for manufacturability/environmental requirements, analysis/simulation, prototyping/development, documentation, and testing. * Supports various design activities for mechanical assemblies and/or sub-assemblies of new/existing products predominantly involving machined/piece parts at the lowest assembly level. Design for manufacturing is considered through all phases of the development process. * Supports design modifications for existing products, frequently driven by vendor/ manufacturing requested changes or component obsolescence situations. The design modification is usually of low complexity and typically requires piece part research on drop-in replacement options. * Applies basic mechanical engineering principles and techniques to support design, development, documentation, verification, and manufacturing integration activities under the direction of his/her mentor. Begins to acquire product domain knowledge. * Conducts basic tolerance, thermal, structural, and design analysis of components, sub-systems, and systems primarily through mathematical calculations. * Provides relevant supporting data for the lead engineer/mentor to use during cross-disciplinary coordination with members of the product development team to produce high quality/dependable products. Members impacted by mechanical design include Electrical Engineering, Test Engineering, Reliability Engineering, Systems Engineering, Safety Engineering, Software Engineering, Verification Engineering, other Engineering, PCB Design, and Management teams. * Provides relevant supporting data for the lead engineer/mentor to use during communications with Component Engineering, Purchasing, and Finance teams to formulate effective obsolescence/cost/lead time mitigation solutions. * Assists/supports Production and Service Station teams with troubleshooting methods of pre-delivery and field return products. Aids in generating root cause corrective actions when failure analysis requires mechanical engineering support. * Begins to understand/utilize internal L3 processes and tools for mechanical design/documentation. * Responsible for performing job duties in a manner consistent with established L3 Ethics Standards. * Responsible for working in a manner consistent with established safety rules and regulations and the use and maintenance of required personal protective equipment (example: safety glasses). * Mentored in performing job duties in accordance with approved procedures established in support of Sarbanes-Oxley regulations. * Work is closely supervised. Tasks are weighted such that impact to the overall project is monitored. * Develops solutions to routine technical problems of limited scope. Our Values are an integral part of who we are. We seek candidates who share our values: * Integrity * Excellence * Accountability * Respect * Bachelor of Science in Mechanical Engineering from an ABET accredited university (0-1 years of experience). * Familiarity with standard mechanical equipment such as calibers, micrometers, etc. * Familiarity with ASME Y14 drawing and CAD standards. * Familiarity with CAE tools such as Pro/ENGINEER and/or SOLIDWORKS (preferred) 3D CAD. * Proficient in Microsoft office products such as PowerPoint, Excel, and Word. * Demonstrates willingness to engage in continuous learning to advance in career. * Engages with other team members in a respectful/positive manner SAVING LIVES AND MAKING THE WORLD A SAFER PLACE TO LIVE L3 Technologies, Inc. is proud to be an Affirmative Action/Equal Opportunity Employer. L3 provides equal employment opportunity for all persons, in all facets of employment. L3 maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks. We encourage all qualified applicants to apply for any open position for which they feel they are qualified and all will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected characteristic. Geneva Aerospace Alpharetta GA

Critical Systems Building Engineer - Mechanical (Day Shift)

Expired Job

CB Richard Ellis