Copper/Fiber Technician And Lead

Xeriom Technology Services Baton Rouge , LA 70806

Posted 7 months ago

Job Description


Labeling, pulling cabling and termination of Category cable, fiber optics and various other wiring disciplines. This position includes the testing and troubleshooting of wiring problems. Server room build outs and smart hands work. Often works individually with little supervision as well as in team environments. Communicates effectively and appropriately when dealing with customers, other departments, and/or personnel at all levels up to President.

Minimum Requirements

  • Telecommunications industry with installation experience a plus.
  • Understanding in BICSI Industry Standards
  • High school diploma or G.E.D.
  • Ability to drive company vehicles (valid drivers license and clean driving record)
  • Capability of manual labor (up to 100lbs of force)


  • Knowledgeable in structured cabling and other advanced technologies

  • Understanding in BICSI Industry Standards

  • Dressing and terminating cables inside distribution frames

  • Knowledgeable in Fiber Optic color codes/standards

  • Computer literate, experience using MS Office, CMD, etc.

  • Knowledgeable in Access Control and Intrusion systems

  • Aptitude with customer service

Essential Functions for all Cabling Technicians

  • Read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and blueprints
  • Procure daily and weekly reports of job progress for project managers
  • Speak effectively before groups of customers or employees
  • Add, subtract, multiply, and divide in all units, using whole numbers, common fractions, and decimals
  • Compute rate, ratio, and percent
  • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions
  • Deal with problems involving a few concrete variables in standardized situations
  • Physical Activity: Climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, repetitive motions.
  • Able to exert up 100lbs of force occasionally, up to 50lbs more regularly
  • Visual acuity within arm's reach (glasses and other visual aids are acceptable if always brought with individual to work)
  • Ability to wear a respirator if necessary

Work Environment

  • Inside and outside conditions

  • Extreme cold/heat

  • High levels of noise / Vibrations

  • Hazards such as moving mechanical parts, moving vehicles, electrical currents, working on scaffolding and high places, and exposure to chemicals

  • Air quality issues such as fumes, odors, dust, mist, gases, and poor ventilation

  • Close quarters such as crawl spaces, shafts, small enclosed rooms, small sewage and water pipes, and other areas which could trigger claustrophobia

  • Narrow aisles and passageways



  • Knowledgeable of cable support systems

  • Installing various cabinets/IT racks to Xeriom specs

  • Routing and dressing cable inside distribution frames

  • Testing and labeling to Xeriom specs

  • Terminating category data cable and coax efficiently

  • Knowledgeable of telephone color code up to 25 pair

  • Ability to troubleshoot POTS lines with a linemans test set

  • Ability to cross connect phone lines on a 66 block

  • Ability to terminate both TIA568A/B wiring schemes


  • Knowledge of fiber color codes

    • Jacket color + strand color + connector

  • Ability to clean fiber optic connectors correctly

  • Test fiber with VFL, OPM, and or Scope

  • Basic fiber optic troubleshooting

  • Ability to terminate Unicam pre-polished connectors

  • Ability to terminate 250um fiber using a fan out kit

Access Control

  • Ability to troubleshoot access control systems

  • Able to install Honeywell access control systems start to finish with configurations

  • Knowledge of badge types and facility codes

  • Ability to troubleshoot using a multimeter on relays and power supplys

  • Ability to determine life safety doors and when to tie access control to the FACP


  • Ability to install Security intrusion hardware to manufacturer specs

  • Ability to terminate and test connections

  • Program a new or existing system

  • Ability to train customers on how to use their new security system

Work tools required:


  • Steel toe boots

  • Tool pouch/belt

Power tools

  • 18v cordless drill

Hand tools

  • Screwdriver Phillips and flat head

  • Precision Screwdriver Phillips and flat head

  • Channel locks

  • Electricians scissors

  • 110/66 punch down tool

  • Diagonal cutters

  • Drywall saw

  • Torpedo level

  • 16 tape measure

  • Flashlight

Other Duties

  • Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Company Description

Xeriom is a innovative company that can design and wire your new or existing facility with Cat5e, Cat6 or fiber and install routers, APs, switches, computers, projectors, security cameras, servers etc. and configure everything to work together. We can install and configure your DAS. Additionally, We also maintains numerous schools and businesses with experienced certified technicians who are on call 24/7 to keep networks and equipment running flawlessly. Our company also has skilled personnel specialists capable of finding people to staff your facility and operate your equipment or help desk.
See if you are a match!

See how well your resume matches up to this job - upload your resume now.

Find your dream job anywhere
with the LiveCareer app.
Download the
LiveCareer app and find
your dream job anywhere

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Engineering Technician 14

State Of Louisiana

Posted 4 days ago

VIEW JOBS 10/14/2018 12:00:00 AM 2019-01-12T00:00 Supplemental Information DISTRICT 61 GANG 266 JOB NUMBER: ET1-4-10/27/18-134650-61/266 No Civil Service test score is required in order to be considered for this vacancy. As part of a Career Progression Group, vacancies may be filled from this recruitment as an Engineering Technician 1, 2, 3, or 4 depending on the level of experience of the selected applicant(s). Please refer to the 'Job Specifications' tab located at the top of the LA Careers 'Current Job Opportunities' page of the Civil Service website for specific information on salary ranges, minimum qualifications and job concepts for each level. Engineering Technician 1 - The starting salary is $937.60 bi-weekly, with an additional $1.00 optional pay for every hour worked. Engineering Technician 2 - Starting salary is $1,073.60 bi-weekly, with an additional $1.00 optional pay for every hour worked. Engineering Technician 3 - Starting salary is $1,229.60 bi-weekly Engineering Technician 4 - Starting salary is $1,408.00 bi-weekly To apply for this vacancy, click on the "Apply" link above and complete an electronic application which can be used for this vacancy as well as future job opportunities. Applicants are responsible for checking the status of their application to determine where they are in the recruitment process by selecting the 'Applications' link after logging into their account. Below are the most common status messages and their meanings. Application received - Your application has been submitted successfully. Evaluating experience - Your application is being reviewed to ensure you meet the minimum qualifications for the position. Minimum Qualification Review – See History – Click the History link for the results of your application review. Passing candidates will designate as "Pass". Failing candidates will designate as "Fail". Eligible for consideration - You are among a group of applicants who MAY be selected for the position. Eligible Pending Supplemental Qualification Review - Only candidates meeting the supplemental qualification will be eligible for referral. Referred to hiring manager for review - Your application has been delivered to the hiring manager. You may or may not be called for an interview. Position filled - Someone has been selected for the position. Position canceled - The agency has decided not to fill the position. The State of Louisiana only accepts online applications. Paper applications will not be accepted. Computer access is available at your local library, at local Louisiana Workforce Commission Business Career Solutions Centers, and at the State Civil Service Testing and Recruiting Center at 5825 Florida Boulevard, Room 1070, Baton Rouge, LA 70806. If you require an ADA accommodation, please contact our office at (225) 925-1911 or Toll Free: (866) 783-5462 during business hours for additional assistance. (Please note: Libraries and LWC centers cannot provide in-depth assistance to applicants with limited computer skills; therefore, we suggest that such applicants have someone with computer proficiency accompany them to these facilities to assist with the computer application process. Also, no State Civil Service employees are housed at the libraries or LWC centers to answer specific questions about the hiring process. Such questions should be directed to the State Civil Service Testing and Recruiting Center at the phone numbers above or by visiting the office on Florida Blvd. where assistance is available. Information is also provided on our job seeker website at For further information about this vacancy contact: Blake Guidry Project Engineer (225) 231-4306 Qualifications MINIMUM QUALIFICATIONS: Possession of a high school diploma or GED. SUBSTITUTIONS: Six months of experience in sub-professional engineering, heavy mobile equipment operation, or mobile equipment maintenance will substitute for the high school diploma or GED. Job Concepts Function of Work: To participate in on-the-job training to learn basic, routine sub professional engineering tasks, as defined in the Examples Of Work Section. Level of Work: Entry. Supervision Received: Close from an Engineering Technician 5, 6, 7, a professional engineer or manager of the agency served. Supervision Exercised: None. Location of Work: May be used by all state agencies. Job Distinctions: Differs from higher level engineering technicians by the focus on learning basic methods, techniques and procedures and by the presence of detailed instructions and close supervision. Examples of Work BRIDGE DESIGN: Learns basic procedures of utilizing Computer Aided Design and Drafting (CADD) to develop simple details required in plan preparation. Learns basic drafting skills and techniques. Performs basic math computations and measurements. Becomes familiar with procedures, rules and regulations. CONTRACT SERVICES: Scans completed bid/contract documents into Visual Info. Performs final quantity checks on all bid items prior to each letting. Assists in the distribution of construction proposals and plans to prospective bidders by entering pertinent data into the computerized bid system. Learns to verify license numbers and check for disqualified contractors. Assists with the maintenance of TOPS (Tracking of Projects System). Performs final quantity checks on all bid items prior to each letting. Distributes various documents within and outside of the Department. Archives completed construction bid proposals and contract documents into Visual Info. DATA COLLECTION & ANALYSIS: Assists higher level technicians in collecting and extracting short session traffic volume and vehicle classification field data. Assists in the development of a daily work plan to install and remove the recorders from assigned monitoring sites. Learns to digitize and create transportation-related features using field collected data, aerial and satellite imagery and other GIS data sets. Learns to perform accuracy checks and quality control of data and edits data to produce various maps and graphic products. DISTRICTS: Performs routine inspection tasks such as writing haul tickets, weighing asphaltic materials, assisting in asphalt plant inspections. Collects and totals quantities from haul tickets for materials delivered by truck to construction projects. Becomes familiar with Department procedures, policies, standards and specifications as relate to the processing of construction-related documents such as partial and final estimates, test reports, and materials audits (2059); assists higher-level technicians in a Project or District Laboratory Engineer's office engaged in these tasks. Assists the District Laboratory field crew in handling augers, taking routine samples, and maintaining equipment. Assists more senior inspectors with measurements or field tests. Assists more senior inspectors in conducting bridge inspections. Makes concrete cylinders. Plots and drafts engineering/surveying drawings using personal computer and drafting software. Serves as rod-person/prism person in land survey crew. Loads/unloads, cleans and maintains survey equipment. Conducts traffic counts, speed studies and general data collection. LOCATION AND SURVEY: Trains on basic photo-interpretation instruments. Assists with indexing photography. Becomes familiar with and begins to utilize Computer Assisted Design and Drafting (CADD) software to create drawings. Becomes familiar with surveying equipment, field terminology and Department/Section procedures. MAINTENANCE: Learns basic computer skills to be used in the processing of bridge reports from District Headquarters. Learns basic procedures of the inventory and inspection database system for the in-service bridges on and off the state system. MANAGEMENT SYSTEMS: Trains in the use of existing data collection and data review equipment so as to contribute to the verification of the completeness and quality of pavement and bridge condition data. Acquires specialized skills in PCs and other pavement/bridge management technical equipment through course work and on-the-job training. MATERIALS TESTING: Learns basic testing procedures and operation of testing equipment for quality assurance testing of construction and maintenance materials such as soils, aggregate, asphalt binders, geo-textiles, cement, metals, soil additives, etc. Learns basic testing equipment repair procedures and techniques. Performs data entry of test data into the statewide automated testing system. Performs basic mathematical calculations to determine material properties. Learns basic sampling procedures and operation of drilling equipment for obtaining deep soil boring samples. Performs a limited range of assignments such as loading and unloading vehicles for travel to and from job sites, handling drilling stems, preparing bentonite slurries and basic maintenance of equipment. PUBLIC WORKS AND WATER RESOURCES: Assists in preparing Advisory Permit responses to government agencies that grant permits. Prepares correspondence from the Water Resources Permit Advisory Unit for mailing. Assists in maintaining Permit Records by means of manual filing and Automated Document Management. Assists with water dam safety inspections, well registration, licensing forms, and data collection/input. Assists in the review of requests for right-of-way submitted by the U.S. Army Corps of Engineers. RESEARCH: Conducts basic engineering research tests in area of expertise under direct supervision of lead worker/engineer supervisor team to support specific research tasks and studies. Learns basic field and laboratory techniques and procedures to enhance safety and knowledge. ROAD DESIGN: Serves in a training capacity, learning basic procedures of utilizing Computer Aided Design and Drafting (CADD) to develop simple details required in plan preparation. Learns basic drafting skills, techniques and basic math computations. Obtains training in computer-aided drafting, basic road design detailing and related computer applications. TRAFFIC ENGINEERING AND SERVICES: Becomes familiar with and begins to utilize CADD software to create drawings; obtains training in CADD, basic road design detailing and related computer applications. Learns basic drafting skills, techniques and basic math computations. Conducts traffic counts, speed studies and general data collection. Learns basic testing procedures and operation of testing equipment for quality assurance testing of construction and maintenance. Learns basic sampling procedures for testing traffic marking and sign sheeting materials. TRANSPORTATION PLANNING AND SAFETY: Learns to prepare computerized Crash History Data reports. Learns to review Police Crash reports sent to DOTD and mark the reports for the location of the crash. State Of Louisiana Baton Rouge LA

Copper/Fiber Technician And Lead

Xeriom Technology Services