CNC Equipment Operator A

Precision Castparts Corporation Jenkintown , PA 19046

Posted 2 months ago

ESSENTIAL FUNCTIONS:

  • Set-up and operate any of the above machines, but normally specialize on one type.

  • Perform work of limited complexity.

  • Set-up and run most of the work, but not the most difficult or complex.

  • Work from bar stock, forgings, blanks or second operations.

  • Obtain assistance with some errors and corrections as required.

  • Perform hand finishing and deburring work as directed.

  • Make all necessary control and offset changes.

  • Grind and dress special tooling for own setup or others.

  • Use a wide variety of gages and measuring instruments to assure blueprint requirements.

  • Occasionally set-up for or assist others.

  • Carry out first piece inspection procedures, quality audits and repair work.

  • Update pan tags and complete production reporting forms.

  • Perform lubrication and preventive maintenance.

ADDITIONAL DUTIES:

  • Maintain work areas in a clean, safe and orderly condition.

  • Adhere to established safety regulations within the department assigned.

  • Perform other duties as necessary or appropriate to the position.

PRE-REQUISITES:

  • The incumbent must have the ability to perform all essential functions of the position with or without reasonable accommodations.

  • Must have demonstrated proficiencies in skills and essential functions required for a N/C Equipment Operator B position and presently operate or have ability to operate listed machines and equipment with routine training and follow written and verbal instructions.

SKILLS REQUIRED:

  • Demonstrate general communication skills such as reading pan tags, reporting production data and receiving job instructions and procedures.

  • Knowledge of arithmetic such as addition, subtraction, multiplication and division, including decimals and fractions, simple use of formulas, charts, tables, drawings, specifications and schedules.

  • Ability to use fixed gages and direct reading instruments and devices in which interpretation is not required (e.g. borescope, gage blocks, go/no go gages, plug gages, ring gages, scale (6" or 12'), scale (weight), snap gages)

  • Must remain alert through diversified operations.

  • Must follow general instructions and standard methods and procedures.

ADDITIONAL INFORMATION:

MACHINE & EQUIPMENT: Cincinnati Milacron CIMX720, Cinturn8, Hardinge, Hitachi-Seki, Hitachi 20SII Lathe, Lynx, Mazak, Puma, Wasino LG 7

TOOLS: Carbide and high speed steel turning, boring, facing, threading, drilling, reaming, tapping and milling tools and cutters. Variety of personal hand tools, wrenches, micrometers, vernier calipers, 6" and 12" scale, etc.

MATERIALS: Any machinable material including high temperature alloys, titanium and multiphase.

WORK GUIDES & INSTRUCTIONS: Method sheets, work drawings, customer blueprints, tool layouts, N/C program print outs, and general instructions.

TOLERANCES & FINISHES: Machine to tolerances of .001 and surface finish of 20 M.I.

ITAR REQUIREMENTS:

Our organization has a responsibility to comply with all applicable requirements set forth by International Traffic Arms Regulations ("ITAR", 22 CFR 120-130). As such, this position may have access to ITAR controlled information and must meet eligibility requirements to work in the United States.

Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.


icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
CNC Operator

Precision Castparts Corporation

Posted 2 months ago

VIEW JOBS 11/3/2019 12:00:00 AM 2020-02-01T00:00 SPS Technologies LLC is a manufacturer of high performance, high-strength fasteners for the aerospace market. SPS Technologies has been an industry leader in this area for over 115 years, creating new materials, designs, and manufacturing practices to satisfy the ever-changing needs of our customers. Our mission is to meet or exceed our customers' expectations by focusing our people and our processes on continuous improvement. We will continually seek to blend technical innovation with cost-effective manufacturing and outstanding service to contribute to the success of our customers and SPS Technologies LLC. Job Summary: The ideal candidate can perform machining to tolerances of .001 and surface finish of 20 M.I. on computer memory and operate computer numerical controlled turning machines, including but not limited to the following: Cincinnati Milacron CIMX720, Cinturn8, Hardinge, Hitachi-Seki, Hitachi 20SII Lathe, Lynx, Mazak, Puma, Wasino LG 7. The candidate may also be required to operate other machine shop equipment as needed. Essential Functions: * Obtain job assignments consists of process sheet and program manuscript from supervisor, production planner or programmer * Set tools as instructed in program. Set jaws and jacks as instructed * Set-up work in machine, using hoist or hand-controlled overhead crane * Monitor tool life/wear and perform tool changes with proper adjustments and offsets to continue running conforming product * Set controls to operate at proper feed, speed and use coolants as required * Use precision measuring instruments and tools, such as micrometers, level protractors, squares, verniers, gauge blocks, die bore gauges, depth gauges, profilometers and numeri-probe vidi-gauges in setting-up and machining work to required tolerances * Check dimensions against process sheets, blueprints or sketches * Perform hand finishing and deburring work as necessary * Stamp and record part #, serial numbers or other required numbers that have been removed in the machining process * Maintain machines and work area in clean and orderly condition * Notify supervisor of any improper operations of machine * May operate worksaver, fork truck, sweeper or other material handling equipment to move pallets, boxes and other items around department * Edit computer memory as required to change machining process * Perform duties of CNC Machine Operator and/or General Machine Operator as required * Perform other related duties in the department as directed by supervision * Adhere to all company and location safety regulations * Carry out first piece inspection procedures, quality audits and repair work * Update pan tags and complete production reporting forms Pre-Requisites The incumbent must have the ability to perform all essential functions of the position with or without reasonable accommodations. The incumbent must have proficiencies in skills and essential functions to operate listed machines and equipment with routine training and follow written and verbal instructions. Skills Required * Demonstrate general communication skills such as reading pan tags, reporting production data and receiving job instructions and procedures * Knowledge of arithmetic such as addition, subtraction, multiplication and division, including decimals and fractions, simple use of formulas, charts, tables, drawings, specifications and schedules * Ability to use fixed gages and direct reading instruments and devices in which interpretation is not required (e.g. borescope, gage blocks, go/no go gages, plug gages, ring gages, scale (6" or 12'), scale (weight), snap gages) * Must remain alert through diversified operations * Must follow general instructions and standard methods and procedures ITAR Requirements: Our organization has a responsibility to comply with all applicable requirements set forth by International Traffic Arms Regulations ("ITAR", 22 CFR 120-130). As such, this position may have access to ITAR controlled information and must meet eligibility requirements to work in the United States. Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law. Precision Castparts Corporation Jenkintown PA

CNC Equipment Operator A

Precision Castparts Corporation