CMM Operator

TTM Technologies, Inc. Stafford Springs , CT 06076

Posted 2 months ago

Job Summary:

This position is responsible to operate a Coordinate Measuring Machine (CMM) using required standards and documentation, and is familiar with all operations necessary in producing a quality product in an efficient manner. Must be able to work independently and handle a fast-paced environmental with a high volume workload. Cross train in other areas.

Responsibilities:

  • Monitors and produces quality product.

  • Run existing CMM programs to monitor and required product characteristics

  • Documents inspection findings; verifies CMM results.

  • Provides immediate feedback on product characteristics that require adjustment

  • Measures using micrometers and calipers.

  • Troubleshoots any problems that may occur during process and consults with supervisor and machinists.

  • Maintains equipment using a PM schedule.

  • Works with other departments on job improvements.

  • Cross train to help in all areas of the department.

  • Works effectively and responsibly with others.

  • All other assigned duties as required within the organization.

Export/ITAR Requirements:

Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to:

  • Being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents.

  • Recognition of Foreign Person visitors by badge differentiation.

EHS Requirements:

  • Accomplish all job related paperwork in the most accurate, timely and ethical manner.

  • Communicates regularly to supervisors/managers, suggests procedural changes, maintains a clean, safe work environment and communicates to supervisors/managers safety hazards and issues.

  • Properly handle and dispose all waste, including hazardous wastes that are generated in daily operations as directed by the EHS department.

  • Responsible to report all accidents, near misses, unsafe acts and unsafe conditions. Perform job duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow directions identified in the Job Safety Analysis (JSA) , PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts.

Job Qualifications:

  • High School Diploma or equivalent. Prior technical training a plus, but not required. Some experience, familiarity and/or background operating machines and in machining desired.

  • Understands complex detail and assembly drawings, GD&T experience, CMM software/operation experience.

  • An understanding of basic CNC machining cause and effect. IE: Understands how to communicate to CNC machinists/operators regarding necessary changes to improve product characteristics.

  • Ability to work required shifts & overtime.

  • Ability to lift up to 25 pounds and sit, stand, or bend for up to 10 hours a day.

  • Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required annually.

  • Requires the ability to work safely with or come into contact with chemical, physical (radiation, noise, etc) or biological agents which may pose health or safety hazards if improperly handled.

  • Ability to communicate in English language clearly both written and verbal. Ability to comprehend and follow instructions.

  • Good computer skills, working knowledge of Windows, Word, Outlook.

  • Ability to work in a small team environment, assist other departments when workloads demand it, and effectively work with all levels of the organization.

  • Good interpersonal skills; ability to show leadership.

  • The following characteristics are needed: approachable, detail oriented, trustworthy, willing to learn, punctual, self disciplined, takes direction well, dependable, flexible, team player, professional, self motivated, manual dexterity, takes pride in work.

  • Ability to follow directions and procedures accurately; to organize facts and figures; apply basic arithmetic.

  • Ability to pass eye exam with minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required regularly.

  • Regular attendance is an essential function for this position.

  • Due to ITAR requirements, applicants must be a US Citizen or Permanent Resident.

Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level.

icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Machine Operator (Smt) 1St

TTM Technologies, Inc.

Posted 1 week ago

VIEW JOBS 5/6/2021 12:00:00 AM 2021-08-04T00:00 SCOPE: This position is responsible to operate automated surface mount equipment to solder electronic components on printed circuit boards. Responsible for the overall operation of machinery including actions such as feeding materials for processing, adjusting settings, performing minor repairs and pulling finished product from the line. Checks and inspects operation results against predetermined tolerances. Must be able to handle a fast paced environment with a high volume workload DUTIES AND RESPONSIBILITIES: (include but are not limited to) * Responsible for surface mount processes utilizing automated equipment and hand assembly. * Performs routine SMT equipment setup, operation and adjustment. * Ensures processes and equipment remain acceptable within company manufacturing standards. * Solder electronic components to the highest industry standards (IPC-A-610 Class III, J-STD-001 Class III). * Visually check work in process for solder defects and makes adjustments as required. * Clean printed circuit boards and equipment as necessary. * Comprehend and follow instructions, read and understand blueprints. * Communicate regularly to supervisor/managers. Work effectively and responsibly with others. * Maintain cleanliness of the work area. * Accomplish all job related processes and paperwork in the most accurate and ethical manner. * Attends meetings, communicates regularly with managers and supervisors, attends special training, maintains a clean, safe work environment and communicates to supervisors safety hazards and issues. * Follow all Company Safety and ESD Program requirements. Responsible to report all accidents, near misses, unsafe acts and unsafe conditions. Perform duties utilizing the required and appropriate personal protective equipment (PPE). Full participation in safety training and the ability to understand and follow directions identified in the Job Safety Analysis (JSA), PPE Assessment, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts. * Properly handle and dispose all waste, including hazardous wastes that are generated in daily operations as directed by the EHS department * All other assigned duties as required within the production organization. * Regular attendance is an essential function of this position. ESSENTIAL KNOWLEDGE AND SKILLS: * Good English skills, able to read, write and speak clearly. * Ability to understand printed circuit board construction including reading assembly drawings, bill of materials and written work instructions. * Must know how electronic components are oriented and distinguish the part numbers. * Understand rules & requirements for proper handling of electronic components: Electrostatic Static Discharge (ESD). * The candidate needs to be familiar with Institute for Printed Circuit (IPC) standards for correct soldering and rework methods, including soldering fine pitch surface mount technology (SMT) and through hole components. * Ability to work up to 10 hours a day, 5 days a week and is flexible to work weekends. The availability to work extra hours at the company's request is mandatory. * Good reading vision: ability to sit/stand for up to 10 hours daily. Ability to lift up to 25lbs. * Ability to pass eye exam with a minimum 20/20 vision that may be corrected via eyeglasses or contact lenses as required. Eye exam is required annually. * Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident. EDUCATION AND EXPERIENCE: * High School Diploma or equivalent. Minimum 1 year soldering experience in equivalent industry; plus 1 year experience running Mydata pick and place equipment preferred. EXPORT STATEMENT: * Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition ofForeign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level. Note: This job description does not state or imply that these are the only duties/responsibilities to be performed by this Associate. The Associate may be required to perform additional duties within the capability of their skill level. TTM Technologies, Inc. Stafford Springs CT

CMM Operator

TTM Technologies, Inc.