Aircraft Mechanic II - Uh-60

Tyonek Native Corporation Huntsville , AL 35801

Posted 2 weeks ago

GENERAL DESCRIPTION:

  • The Aircraft Mechanic will perform Field and Sustainment level maintenance, and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with the Field and Sustainment level maintenance, fixed base operations, as well as perform troubleshooting and maintenance repairs on the flight line in support of customer requirements.

DUTIES:

  • Performs scheduled inspections and assists in performing special inspections. Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components

  • Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required

  • Perform preflight, thru-flight, and post-flight maintenance

  • Must be able to jack and tow aircraft

  • Must be capable of qualifying to perform Hazardous Flight duties as Crewmembers/Non-Crewmembers and meet the qualifications established in AR 95-20.

  • Other duties as assigned

EDUCATION/EXPERIENCE REQUIREMENTS:

  • High School Diploma or equivalent

  • Army experience in rotary wing flight line and organizational/intermediate level maintenance

  • Army MOS 15T graduate and or equivalent training required

  • Must have 4 years direct experience in aircraft maintenance

  • Reset or Depot experience preferred

  • Must be a US Citizen

  • Must have or be able to obtain and maintain a Secret Clearance.

  • We maintain a drug-free workplace and perform post offer, pre-employment substance abuse testing.

PHYSICAL REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

  • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.

  • Must be able to climb stairs, ramps, ladders, and work stands.

  • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.

  • May be required to lift up to 50 pounds.

  • May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.

  • Must be able to see imperfections, micrometer readings and other small scales.

  • Must be able to communicate by voice and detect sound by ear.

  • Must be able to distinguish color and judge three-dimensional depth.

  • May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.

EQUAL OPPORTUNITY EMPLOYER / VEVRAA / ADA

TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law.

icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Mechanical Engineer II

Mantech International Corporation

Posted Yesterday

VIEW JOBS 4/9/2021 12:00:00 AM 2021-07-08T00:00 Secure our Nation, Ignite your Future Become an integral part of a diverse team while working at an Industry Leading Organization, where our employees come first. At ManTech International Corporation, you'll help protect our national security while working on innovative projects that offer opportunities for advancement. Currently, ManTech is seeking a motivated, career and customer-oriented Mechanical Engineer to join our team in the Crane, Indiana location. Responsibilities include, but are not limited to: * Contribute to an engineering team responsible for the design, development, integration, and test of complex DoD systems with emphasis on radar and electronic warfare systems * Interact with stakeholders to development system requirements and architecture * Oversee planning and execution of integration and test activities * Develop and apply disciplined methods and processes that implement engineering concepts in accordance with the following standards * ISO/IEC/IEEE 15288 System and Software Engineering -System Life Cycle Processes * ISO/IC/IEEE 29148 System and Software Engineering Requirements Engineering * IEEE 15288.1 Systems Engineering on Defense Programs Basic Qualifications: * BS in mechanical engineering * 5-12 years' experience with DoD engineering and acquisition as defined in DoDD 5000.01 The Defense Acquisition Systems, DoDI 5000.02 Operation of the Adaptive Acquisition Framework, and further defined in the Defense Acquisition Guidebook * Prior assignments as a mechanical engineer * Knowledge and implementation of the US Navy Naval Air Systems Instruction 4355.19 (NAVAIRINST 4355.19) Systems Engineering Technical Review (SETR) process * Knowledge and practical implementation of systems engineering process with focus on model-based systems engineering methods * Knowledge of and practical experience with technical drawings in accordance with the following standards and related standards * ASME Y14.24 Types and Applications of Engineering Drawings * ASME Y14.100 Engineering Drawing Practices * ASME Y14.3 Multiview and Sectional View Drawings * MIL-D-23140D Installation Control Drawings for Electronic Equipment * Knowledge of and experience execution of environmental testing in accordance with MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests * Practical experience with computer aided design applications and functions Preferred Qualifications: * Experience with Solid Edge and SolidWorks CAD application tools * Experience with MagicDraw Cameo systems design tool * Experience with DOORS requirements management tool * Experience with Microsoft Project schedule tool * Experience with systems engineering planning and work breakdown in accordance with MIL-STD-881 Security Clearance Requirements: * Minimum eligibility for DoD Secret Clearance. Preference is current approved clearance. Physical Requirements: * Must be able to sit at desk 50% of time For all positions requiring access to technology/software source code that is subject to export control laws, employment with the company is contingent on either verifying U.S.-person status or obtaining any necessary license. The applicant will be required to answer certain questions for export control purposes, and that information will be reviewed by compliance personnel to ensure compliance with federal law. ManTech may choose not to apply for a license for such individuals whose access to export-controlled technology or software source code may require authorization and may decline to proceed with an applicant on that basis alone. ManTech International Corporation, as well as its subsidiaries proactively fulfills its role as an equal opportunity employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, religion, age, sexual orientation, gender identity and expression, national origin, marital status, physical or mental disability, status as a Disabled Veteran, Recently Separated Veteran, Active Duty Wartime or Campaign Badge Veteran, Armed Forces Services Medal, or any other characteristic protected by law. If you require a reasonable accommodation to apply for a position with ManTech through its online applicant system, please contact ManTech's Corporate EEO Department at (703) 218-6000. ManTech is an affirmative action/equal opportunity employer - minorities, females, disabled and protected veterans are urged to apply. ManTech's utilization of any external recruitment or job placement agency is predicated upon its full compliance with our equal opportunity/affirmative action policies. ManTech does not accept resumes from unsolicited recruiting firms. We pay no fees for unsolicited services. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access http://www.mantech.com/careers/Pages/careers.aspx as a result of your disability. To request an accommodation please click careers@mantech.com and provide your name and contact information. Mantech International Corporation Huntsville AL

Aircraft Mechanic II - Uh-60

Tyonek Native Corporation