Abrasive Clean Technician I - 1St Shift

Hawker Pacific Aerospace Sun Valley , CA 91352

Posted 3 weeks ago

Hawker Pacific Aerospace, Sun Valley, CA is seeking an Abrasive Clean Technician I to support its Small Parts Cell department. Selected applicant will be responsible for inspecting, cleaning, and preparing (through steam cleaning and abrasive blasting) parts for nital etch, chrome, nickel and cadmium plating. Responsibilities also include plastic media blasting and shot-peening.

An Abrasive Cleaning Technician may be assigned to one or more departments depending upon the company needs at the time.

Essential Duties:

This individual has the responsibility and authority to carry out assigned task. May be assigned some or all duties indicated below depending on job progression level.

  • Prepare all abrasive cleaning work to be performed.

  • Prepare, clean, set up, blast or shot-peen all assigned work.

  • Primary duty consists of preparing parts through masking, blasting and shot-peening. Must also assist in the cadmium plating of both large and small parts.

  • Operate manual and automated Shot-Peen Machine. Prepare aircraft parts for shot-peening.

    Calculate and graph saturation curves. Perform part equivalency testing prior to shot-peening aircraft part. Maintain preventative maintenance of the Shot-Penn Machine.

  • Maintain all consumables for blasting (i.e. media, nozzles, etc.). Routinely order those needed supplies through the Supervisor.

  • Regularly empty and clean the large walk-in blast booth and all blasters used in plating.

  • Assist in training junior personnel.

  • Responsibility to work with LEAN Manufacturing principles.

  • Performs other duties as required by business needs.

Education: High School Diploma or equivalent.

Certification/Licensure: Shot-Peen

Experience: One (1) year prior work experience in a manufacturing/ shop environment preferred.

This position may require use of information which is subject to the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), or both. U.S.

Person preferred. Under U.S. law, a U.S.

Person is: a U.S.

Citizen, a U.S.

Permanent Resident (i.e. 'Green Card status'), a Political Asylee or Refugee. Foreign Nationals applying for this position are subject to U.S. export licensing requirements in order to lawfully have access to technical data, including approval(s) from the U.S.

Department of State, Directorate of Defense Trade Controls or the U.S.

Department of Commerce, Bureau of Industry and Security. Prior written authorization from the U.S.

Department of State-DDTC or the U.S.

Department of Commerce-BIS, or both, must be granted, or the inapplicability of such requirements must be certified by the Empowered Official, BEFORE the applicant can work at Hawker Pacific Aerospace.

We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing.



icon no score

See how you match
to the job

Find your dream job anywhere
with the LiveCareer app.
Mobile App Icon
Download the
LiveCareer app and find
your dream job anywhere
App Store Icon Google Play Icon
lc_ad

Boost your job search productivity with our
free Chrome Extension!

lc_apply_tool GET EXTENSION

Similar Jobs

Want to see jobs matched to your resume? Upload One Now! Remove
Aviation Maintenance Inspector II 1St Shift

Hawker Pacific Aerospace

Posted 3 weeks ago

VIEW JOBS 4/23/2021 12:00:00 AM 2021-07-22T00:00 Hawker Pacific Aerospace, Sun Valley, CA is seeking an Aviation Maintenance Inspector II to support its Quality Control - Final Inspection department. Selected applicant will perform detailed and complex inspections of piece parts and complete assemblies and perform Return To Service functions on both: Applies Lean Process principles in the continuous improvement process, maintains surveillance over receiving functions, Assembly and Test functions in order to ensure product conformance to applicable specifications. Performs receiving and final inspection of components, piece parts and materials from outside sources, secures the necessary documentation for traceability, and issues non-conformity reports and requests for corrective actions. Interfaces with source inspectors and customers during audits and visits. An Aviation Maintenance Inspector may be assigned to one or more departments depending upon the company needs at the time. Essential Duties: This individual has the responsibility and authority to carry out assigned task. May be assigned some or all duties indicated below depending on job progression level. 1. Perform inspection of components and assemblies; verify that all necessary documentation accompanies the work package and is properly filed. 2. Confirm adherence to assembly and test procedures. Apply established overhaul standards and practices. 3. Provide technical assistance to all departments. 4. Contribute to cost reduction efforts. Actively participate to improve quality and efficiency. 5. Assist in the training and development of other personnel. 6. Inspect planning per customer OEM and contractual requirements. Maintain inspection records and material traceability documentation. 7. Initiate rework orders and corrective action requests. Recommend process improvements and methods of cost savings. Support the analysis of warranty and field returns. 8. Provide technical assistance to other inspection and manufacturing personnel. 9. Interface with source inspectors and auditors. Provide assistance for source evaluation and product acceptance. 10. Occasionally perform audits and surveys to assure in-house as well as supplier conformance. 11. Coordinate the various jobs that are required for building. 12. Track parts for smooth coordination between departments in relation to relevant jobs, resolving any complications or problems, if they arise. 13. Ensure high availability of piece parts at built date. 14. Coordinate between the Purchasing and Shipping/Receiving department. 15. Continuous efforts to improve the marshalling area. 16. Assist in determination of root causes for defects, and in formulation of corrective actions to prevent defect recurrence. 17. Understanding of customer specifications, drawing, inspection instructions and checklists. 18. Be able to identify structural flaws, internal defects. 19. Uses various measuring devices. 20. Solid understanding of blueprints. 21. Uses predetermined methods, operations, setups prescribed to perform inspection. 22. Inspect visually in-process and completed products. 23. Good understanding of diagrams, dial indicators, preset micrometers, scales and fixtures. 24. May monitor and verify quality in accordance with statistical process or other control procedures. 25. Responsibility to work with LEAN Manufacturing principles. 26. Performs other duties as required by business needs. Education: High School Diploma or equivalent. Bachelor's degree preferred. Certification/Licensure: A & P License preferred. Experience: 2 - 4 years of Landing Gear and MRO experience This position may require use of information which is subject to the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR), or both. U.S. Person preferred. Under U.S. law, a U.S. Person is: a U.S. Citizen, a U.S. Permanent Resident (i.e. 'Green Card status'), a Political Asylee or Refugee. Foreign Nationals applying for this position are subject to U.S. export licensing requirements in order to lawfully have access to technical data, including approval(s) from the U.S. Department of State, Directorate of Defense Trade Controls or the U.S. Department of Commerce, Bureau of Industry and Security. Prior written authorization from the U.S. Department of State-DDTC or the U.S. Department of Commerce-BIS, or both, must be granted, or the inapplicability of such requirements must be certified by the Empowered Official, BEFORE the applicant can work at Hawker Pacific Aerospace. We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Hawker Pacific Aerospace Sun Valley CA

Abrasive Clean Technician I - 1St Shift

Hawker Pacific Aerospace