1St Class Field (Manual) Machinist - Steel America (Job ID: 619)

1st Class Field Manual Machinist- Steel America

Purpose:

Steel America On-Site Machining, a division of Colonna's Shipyard, is seeking 1st Class Manual Field Machinists to work multiple on & off-site projects in and around Norfolk, VA.

Job Description:

• Routine blueprint reading and technical writing to accomplish work tasks.

• Daily use of tools such as micrometers, height gauges, Vernier calipers, and dividing heads to support tasking.

• Operate machine tools in varying tolerances according to need (from ½ thousands upwards).

• Non routine maintenance and repair the portable machines tools.

• Routine use of hoisting and rigging equipment for heavy pieces such as forklifts and chain falls

• Responsible for system tolerance determination and application.

• Daily tasking will involve work on the following:

• Rudders and Steering systems to include blue checking and fitting, piano wire alignment method, stock straightness determination, hydraulic and pneumatic controls.

• Bearings and Bushings to include lubrication types and methods, piano wire fit and alignment method, dial indicator alignment.

• Engines, Motors, and Generators: diesel engines, gas or steam turbines, generators, motors, reduction gears, clutches, PTO's, mount arrangements, systems flushing, heat exchanger (shell/tube and plate/frame), heat exchanger and systems leak testing.

• Propulsion Shafting to include: CPP shafting, hydraulic couplings, clearance (water bearings), wear downs (oil bearings), Piano wire alignment method, dial indicator alignment, FRP spark test, bearing contact determination, shaft straightness (run out) determination.

• Seals to include gaskets, packing, and "O"-rings, lips & labyrinth, mechanical, tightness testing.

• Valve work: leak testing, seat types, packing/gasketing/lubrication, lapping, seat types (materials and types).

• Propellers to include Keyed, Tapered, Flanged & Key fits- Solid and Built, CPP Systems, Polishing.

• K. Pumps to include Valving (internal & external), Bearing & Sealing arrangements, Alignment (dial indicator & laser).

• Deck machinery: gear boxes, bearings/seal arrangements, alignments, drivers (electric, mechanical, or hydraulic), sheaves, cables, turrets, booms

• Instruct lower classes of machinists, manage work/personnel assignments and the requisition of job materials.

• Upholding a safe work environment is key daily tasks require safe handling/use/storage of gasses; safe work practices; PPE; tank safe opening practices; lock-out/tag-out; confined space practices; respirator/harness fit; oil spill response.

Qualifications:

• Must have a high school diploma or equivalent and at least seven (7) years of experience as a Machinist.
• Must have experience with manual lathes and mills.
• Must be able to read and comprehend blueprints, drawings and other technical trade related documents
• Must have adept mechanical ability, manual dexterity, and hand/eye coordination required to perform various projects, per drawings, sketches, and verbal or written instructions.
• Must have clean driving record.

Desired Qualifications:

• Technical training preferred.

Security Requirements:

• Position requires you to gain and maintain access to government and military installations, often requiring completion of stringent background checks and screenings.
• May require the ability to obtain and maintain appropriate level of security clearance depending on the contract.
• Must be able to provide proper documentation as needed to process access/clearance (e.g. birth certificate, identification card, etc.).

Travel Requirements:

• Frequent Travel; 50% or less.
• International travel required on a nonstandard routine.

Physical Requirements:

• Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs.
• Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes.
• May ride ships at sea for extended periods
• Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels.
• Frequent exposure to noise due to machinery and equipment.
• Employee is required to operate trucks, forklifts & man-lifts.
• While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl.
• Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation
• Frequent use of respirator.
• Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.

Respect, Pride, Truth, Family- These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry.

Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).