Your perfect Installation And Maintenance job is here! Find that Installation And Maintenance job in Fultondale with the Livecareer Job Search Engine

Maintenance Technician - Die Casting

Job Introduction To troubleshoot systems and perform preventive and predictive maintenance on various equipment, while always keeping safety as a priority. Will also provide support for

Posted on September 25, 2017

<h5 id="JDLabel-Field2">Job Introduction</h5> To troubleshoot systems and perform preventive and predictive maintenance on various equipment, while always keeping safety as a priority. Will also provide support for production and carry out the assignments and responsibilities given to them by the casting department maintenance supervisors and team leaders. <h5 id="JDLabel-Field3">Major Responsibilities</h5> Responsible for supporting safety, quality, and productivity while adhering to plant standards . <br /> Also, maintain, troubleshoot, and provide continuous improvement suggestions resulting in minimal downtime of manufacturing equipment in the casting area. Support installation and modification of equipment to ensure quality control requirements are met and process enhancements are realized. <br /> 1)Follow and enforce all plant safety rules and policies. <br /> 2)Understand and promote companies philosophies . <br /> 3)Follow and comply with all plant safety standards including LOTO <br /> 4)Troubleshooting, diagnosis and repair of various manufacturing equipment, including PLC, HMI’s, Mechanical, Electrical, Controls, Robots, etc. <br /> 5)Support continuous improvement and lean manufacturing processes <br /> 6)Effective communication with team members and other departments <br /> 7)Maintain integrity of safety devices including light curtains, safety gates, barriers, e-stops, guarding & fencing, etc. <br /> 8)Assist in design and installation of new/improved manufacturing equipment, components, and processes <br /> 9)Make modifications to existing equipment as required <br /> 10)Assist in determining spare parts requirements <br /> 11)Maintain accurate documentation <br /> 12)Train operators and new team members on fixtures, control panels, etc. <br /> 13)Assist employees with running lines <br /> 14)Provide support for machine improvements <br /> 15)Ensure equipment meets NEC, OSHA, RIA, regulations <br /> 16)Perform PM inspections as required, complete with all repairs <br /> 17)Disassemble defective equipment as well as replaces defective parts, electrical, mechanical, hydraulic, pneumatic, etc. <br /> 18)May specialize in repairing specific manufacturing equipment, and equipment that is not specific to the manufacturing process. <br /> 19)Use computerized or manual maintenance information systems to document the details of equipment related issues, repairs made, preventative and predictive maintenance measures taken, etc. <br /> 20)Use computerize or manual systems to facilitate root cause analysis for failures resulting in major downtime (as defined by management). Once the root cause has been identified, put measurements in place that will prevent reoccurrence within the affected business unit, as well as across the facility. <br /> 21)Interface with all necessary production associates, production supervision, etc., to ensure issues are identified and resolved. In general, communicate with the production team. <br /> 22)Minimize downtime by effective use of resources including response time, technical expertise, tools, spare parts and external contacts <br /> 23)Promote, monitor and maintain good housekeeping (5S) <br /> 24)Perform other duties as required. <h5 id="JDLabel-Field4">Knowledge and Education</h5> EDUCATION: <br /> High School Diploma or GED required; 2-year degree from a technical college or minimum of three years on-the-job training with heavy industrial manufacturing facility in skilled trade capacity. <br /> <br /> TECHNICAL TRAINING: General knowledge of industrial maintenance with an emphasis on electrical, mechanical, robotics, or controls application <br /> <br /> OTHER: Journeyman Certification preferred <br /> <h5 id="JDLabel-Field5">Work Experience</h5> Minimum of 4 years Maintenance experience in a manufacturing environment preferred <h5 id="JDLabel-Field6">Skills and Competencies</h5> -Must have good mathematical and communication skills <br /> -Ability to read and understand schematics <br /> -Ability to use testing and troubleshooting equipment <br /> -Must have a good understanding of rigging, cranes, etc. <br /> -Must have a general knowledge of hydraulics and pneumatics <br /> -Must be able to pay good attention to detail <br /> -Must have a basic knowledge of drafting (blueprint reading, dimension drawings, etc.) <br /> -Basic knowledge of AUTOCAD <br /> -Must be able to work extended hours as needed to meet customer requirements <br /> -Must have basic knowledge or Microsoft Office (Word, Excel, Outlook) <br /> -Must have general knowledge on electrical theory and troubleshooting <br /> -Must have general mechanical knowledge

Multi-Craft Maintenance Technician - Casting

Cosma International Birmingham ,AL

##### Company Introduction Kamtek is a Tier 1, automotive manufacturing supplier that specializes in Metal Stamping and Assembly for Mercedes, Volkswagon, Kia and Hyundai. As a local distributor and supplier, Kamtek’s market

Posted on September 24, 2017

##### Company Introduction Kamtek is a Tier 1, automotive manufacturing supplier that specializes in Metal Stamping and Assembly for Mercedes, Volkswagon, Kia and Hyundai. As a local distributor and supplier, Kamtek’s market segmentation to Cosma International, (a division of MAGNA INTERNATIONAL) provides a “state-of-the-art” product that utilizes the most technologically advanced Pressing processes in order to maintain a competitive advantage to other OEM’s within the market. Our company’s culture of team spirit & mutual respect with a focus on fair treatment helps us to embrace our multi-cultural affiliation with Magna International, and supports our mission through process efficiency and competitive product pricing. Furthermore, the culture at Kamtek focuses on Job Security, with employees being given the opportunity for continuous training, advancement within the skill/trade, and potential for growth within our safe work environment. We offer Employee Equity and Profit Participation programs which increase our employees’ ownership within the company. Kamtek, part of Cosma International and a division of Magna International, represents the the most diversified automotive supplier in the world. We design, develop and manufacture automotive systems, assemblies, modules and components, and engineer and assemble complete vehicles, primarily for sale to original equipment manufacturers (OEMs) of cars and light trucks in our three geographic segments - North America, Europe, and Rest of World (primarily Asia, South America and Africa). Our capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; metal body & chassis systems; mirror systems; exterior systems; roof systems; electronic systems; powertrain systems as well as complete vehicle engineering and assembly. We have a global presence in order to support our customers on a worldwide basis, consisting of 136,000 employees in 319 manufacturing operations and 85 product development, engineering and sales centers in 29 countries on four continents as of Q2 2015. ##### Job Introduction To troubleshoot systems and perform preventive and predictive maintenance on various equipment, while always keeping safety as a priority. Will also provide support for production and carry out the assignments and responsibilities given to them by the casting department maintenance supervisors and team leaders. ##### Major Responsibilities Responsible for supporting safety, quality, and productivity while adhering to KAMTEK’s plant standards and upholding the Magna Employee’s Charter. Also, maintain, troubleshoot, and provide continuous improvement suggestions resulting in minimal downtime of manufacturing equipment in the casting area. Support installation and modification of equipment to ensure quality control requirements are met and process enhancements are realized. 1)Follow and enforce all plant safety rules and policies. 2)Understand and promote Magna’s philosophies (Magna Operational Principles, Corporate Constitution and Employee’s Charter). 3)Follow and comply with all plant safety standards including LOTO 4)Troubleshooting, diagnosis and repair of various manufacturing equipment, including PLC, HMI’s, Mechanical, Electrical, Controls, Robots, etc. 5)Support continuous improvement and lean manufacturing processes 6)Effective communication with team members and other departments 7)Maintain integrity of safety devices including light curtains, safety gates, barriers, e-stops, guarding & fencing, etc. 8)Assist in design and installation of new/improved manufacturing equipment, components, and processes 9)Make modifications to existing equipment as required 10)Assist in determining spare parts requirements 11)Maintain accurate documentation 12)Train operators and new team members on fixtures, control panels, etc. 13)Assist employees with running lines 14)Provide support for machine improvements 15)Ensure equipment meets NEC, OSHA, RIA, and Magna regulations 16)Perform PM inspections as required, complete with all repairs 17)Disassemble defective equipment as well as replaces defective parts, electrical, mechanical, hydraulic, pneumatic, etc. 18)May specialize in repairing specific manufacturing equipment, and equipment that is not specific to the manufacturing process. 19)Use computerized or manual maintenance information systems to document the details of equipment related issues, repairs made, preventative and predictive maintenance measures taken, etc. 20)Use computerize or manual systems to facilitate root cause analysis for failures resulting in major downtime (as defined by management). Once the root cause has been identified, put measurements in place that will prevent reoccurrence within the affected business unit, as well as across the facility. 21)Interface with all necessary production associates, production supervision, etc., to ensure issues are identified and resolved. In general, communicate with the production team. 22)Minimize downtime by effective use of resources including response time, technical expertise, tools, spare parts and external contacts 23)Promote, monitor and maintain good housekeeping (5S) 24)Perform other duties as required. ##### Knowledge and Education EDUCATION: High School Diploma or GED required; 2-year degree from a technical college or minimum of three years on-the-job training with heavy industrial manufacturing facility in skilled trade capacity. TECHNICAL TRAINING: General knowledge of industrial maintenance with an emphasis on electrical, mechanical, robotics, or controls application OTHER: Journeyman Certification preferred ##### Work Experience Minimum of 4 years Maintenance experience in a manufacturing environment preferred ##### Skills and Competencies * Must have good mathematical and communication skills * Ability to read and understand schematics * Ability to use testing and troubleshooting equipment * Must have a good understanding of rigging, cranes, etc. * Must have a general knowledge of hydraulics and pneumatics * Must be able to pay good attention to detail * Must have a basic knowledge of drafting (blueprint reading, dimension drawings, etc.) * Basic knowledge of AUTOCAD * Must be able to work extended hours as needed to meet customer requirements * Must have basic knowledge or Microsoft Office (Word, Excel, Outlook) * Must have general knowledge on electrical theory and troubleshooting * Must have general mechanical knowledge ##### Work Environment Some of the physical demands for the position include being able to lift a weight of 40 pounds; frequent bending, stooping and stretching; being able to stand for prolonged periods of time; and ability to walk for prolonged periods of time. *Group:* Cosma International *Division:* Kamtek *State/Province/County:* Alabama *City:* Birmingham *Job Type:* Regular

Maintenance Engineer

Sinclair Broadcast Group Birmingham ,AL

Maintenance Engineer Tracking Code 7704 Job Description Make your mark in Broadcasting and Digital Media. Sinclair Broadcast Group and Sinclair Digital Solutions are dedicated to making Sinclair a communications powerhouse!

Posted on September 24, 2017

Maintenance Engineer Tracking Code 7704 Job Description Make your mark in Broadcasting and Digital Media. Sinclair Broadcast Group and Sinclair Digital Solutions are dedicated to making Sinclair a communications powerhouse! We are the largest and most diversified television broadcasting company in the country. Sinclair owns and operates, programs or provides services to more television stations than anyone and has affiliations with all major networks. Sinclair Digital group is focused on bringing the most engaging content to web, mobile and over-the-top broadcasting to audiences all over the country! Our success is the result of extraordinary employees and an exemplary management team who believe in a vision and are dedicated ensuring a great future for our employees. Whether you are an industry veteran or a just starting out, you can find it at Sinclair! We are advancing the world of Broadcasting and we want YOU to join our winning team! WBMA/WABM/WTTO, in Birmingham, AL, is seeking a Maintenance Engineer! This individual will be responsible for installing and maintaining video, audio, and other equipment associated with television broadcasting. This includes server-based record and play-out systems, non-linear editors, production switchers, routing switchers, MPEG encoders, decoders, automation, news room computer systems, data networks, and broadcast transmission equipment. Responsibilities include: + Provide the engineering design and assist with the building and installation of electronic systems/equipment as assigned + Maintain and repair transmitters (AM, FM, TV, Microwave, Fiber, satellite, etc.), receivers, cameras, switchers, graphic systems, audio equipment, routers, automation/editing systems, intercoms, two-way radios, monitors and display systems + Provide technical support to operational users + Consult and communicate with engineering management and other engineers on technical issues as required + Provide specific engineering signal flow diagrams for CAD documentation on all work performed on technical systems + Perform all technical work to engineering standards and practices + Other duties may be assigned Other Qualifications and Requirements: + Self-starter, able to work efficiently without direct supervision + Be able to work effectively with other departments receiving and communicating instructions via telephone or in person + Be able to read and understand technical materials + Able to set priorities under pressure of deadlines + Able to concentrate for long periods of time + Hold a valid driver's license + Must be flexible to accommodate shift changes including extended hours, weekends, holidays and evenings + Associate’s degree (AA) in electronics preferred + Minimum of two years broadcast experience + Working knowledge of broadcast station operations Sinclair Broadcast Group, Inc. is proud to be an Equal Opportunity Employer and Drug Free Workplace! Job Location Birmingham, Alabama, United States Company Location HR.WBMA/WJSU/WCFT.Birmingham.Birmingham.AL Position Type Full-Time/Regular

Maintenance Mechanic

Medxcel Facilities Management Birmingham ,AL

Medxcel Facilities Management is here to lead the transformation of healthcare facilities management by incorporating a new approach to providing services. Created by healthcare, for healthcare, we have a dedicated focus on

Posted on September 24, 2017

Medxcel Facilities Management is here to lead the transformation of healthcare facilities management by incorporating a new approach to providing services. Created by healthcare, for healthcare, we have a dedicated focus on our people and customers, as well as providing tools, processes, support resources, data analytics and insource strategies that drive results. The Maintenance Mechanic will perform preventive maintenance duties for Medxcel Facilities Management throughout the assigned working location of St. Vincent's East Hospital - Birmingham, AL. This position troubleshoots, diagnoses, and repairs mechanical systems and equipment for the facilities. Specialized knowledge and expertise in HVAC, motors, plumbing, electrical and mechanical systems are required to perform a variety of duties including: repairing heating, lighting, cooling, plumbing, ventilation systems and equipment; installation and maintenance of motors; and the installation and maintenance of specialized equipment. Mechanical System Maintenance and Repair + Installs, maintains, and repairs equipment such as steam valves, steam traps, steam or water coils, radiators, water softeners, unit heaters, water heaters, condensate and circulating pumps. + Installs, services, and repairs electric motors, heaters, coolers, refrigerators, and other related equipment using various hand and power tools of the maintenance trades. + Installs, maintains, and repairs air compressors and other air conditioning equipment using various machine tools. + Services and repairs appliances such as fans, toasters, washing machines, and gasoline pumps using machine and hand tools; may also maintain, operate, and repair motor vehicles (tune-ups, brakes, hydraulics). + Maintains central steam and chemical water treatment systems, as well as other systems, using gauges and other test instruments to diagnose malfunctions and mechanic hand and power tools to disassemble, repair, and reassemble system components. + Fabricates, assembles, and tests parts as needed, such as various pumps, valves, laboratory equipment, heaters, compressors, experimental fire equipment, and other mechanical system parts using metal fabricating tools, common hand tools, power tools, and welding torches + Safely operates electrical and air powered tools, pipe fitting, welding, hydraulic, pneumatic, and other mechanical tools, snow removal and salt spreader equipment and/or other heavy equipment assigned to the department. + Installs new/replacement equipment and materials in facilities by performing electrical, plumbing, carpentry, welding, masonry, glazing, boiler, hydraulic, pneumatic, irrigation, heating, refrigeration, ventilating, air conditioning and other maintenance work + Trouble shoots, diagnoses and repairs malfunctions in boilers, electrical, hydraulic, pneumatic, heating, refrigeration, ventilating and air conditioning, irrigation and other RTD systems, structures and equipment Special Projects + Participates in meetings, workshops, training, and seminars, as assigned for the purpose of conveying and/or gathering information required to perform job functions. + Assist and participate in special projects as assigned + Other duties as assigned Job Requirements + High School Diploma or equivalent required. + 5 years mechanical experience preferred. + At least 2 years journey level experience in a related trade preferred. + Experience in healthcare facility preferred. + Completion of a recognized program in vocational training for a relevant trade preferred. Knowledge + Ability to understand and interpret building system documents, prints, and layouts + In-depth knowledge of electronic, electrical and mechanical systems and digital and pneumatic controls. + The ability to operate tools and equipment with a skill level that is typically acquired through trade and/or vocational schools. + Must have the ability to: + Calibrate systems. + Perform preventive maintenance and routine servicing of equipment. + Operate specialized machinery, equipment and tools utilized in the repair, installation and maintenance of heating, ventilation, air-conditioning and refrigeration systems. + Communicate and follow up effectively both orally and in writing. + Knowledge of the accepted practices, processes, materials, and tools of the maintenance trades. + Knowledge of electric motors, generators, pumps, pressure systems, water systems and other equipment and systems found in state buildings and facilities. + Knowledge of the servicing and maintenance of simple power, heating, and cooling units. + Knowledge of the occupational hazards and safety precautions of the building maintenance trades. + Ability to perform routine mechanical or electrical maintenance + Ability to maintain proper care of tools and equipment used in general maintenance activities ID: 2017-7792

Electrician, Maintenance (Full-Time) - Monday Through Friday Job

Compass Group, North America HOMEWOOD ,AL

[http://go.compass-usa.com/sectorlogos/CrothallLogo.jpg] We have an opening for a full-time Electrician, Maintenance position. Location : Brookwood Medical Center - 2010 Brookwood Medical Center Dr., Homewood, AL

Posted on September 24, 2017

[http://go.compass-usa.com/sectorlogos/CrothallLogo.jpg] * We have an opening for a full-time *Electrician, Maintenance *position. * *Location*: Brookwood Medical Center - 2010 Brookwood Medical Center Dr., Homewood, AL 35209. /Note: online applications accepted _only_./ * *Schedule*: F/T schedule; primarily Monday through Friday, 7:30am - 4:00pm. * *Requirement*: Must have a valid electrical license. If you have a positive attitude and a love for learning, you may be interested in joining our team. Crothall Healthcare, a division of Compass Group North America, provides customer focused support services. As specialists, we perform services including healthcare housekeeping, management in laundry processing, patient transportation, business facilities management and clinical engineering. Crothall is a compilation of the most committed and talented individuals working in the industry today. Our dedication to quality, exceptional customer service, and unequivocal results allow us to provide the best outcomes to our clients. *Full time associates at Crothall are offered many fantastic benefits such as:* * Medical * Dental * Vision * Flexible Spending Accounts (FSAs) * Commuter Benefits * Wellness Program * Employee Assistance Program * Life Insurance for Associates and Eligible Dependents * Short Term Disability (STD) and Long Term Disability (LTD) * Accidental Death & Dismemberment (AD&D) Insurance * Discount Marketplace * 401(k) * And other voluntary benefits *Summary:* Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. * Essential Duties and Responsibilities:* * Provides quality customer service by providing one-on-one attention to detail. * Responds to dispatch calls for machine repairs using company vehicle. * Calls on existing customers to determine adequacy of service; listens to and resolves service complaints. * Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area. * Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities. * Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair. * Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability. * Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment. * Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational. * Recommends appropriate sources of electrical power for new installations or renovation projects. * Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc. * Performs corrective maintenance in accordance with the work order system. * Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner. * Maintains clean and safe work environment; performs job safely. * Exhibits professionalism with customers, fellow employees and others. * Performs other duties as assigned. *Qualifications:* * Valid Non-CDL Class C driver's license. * Valid current state/local electrical license. * Two years of trade school or related experience. * Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation. * Working knowledge of local, state and the National Electric Code (NEC). *About Compass Group: Achieving leadership in the foodservice industry* Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. /*Los Angeles applicants: Compass Group will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box ordinance)./ Req ID: 123427

JOB INDUSTRIES

JOB INDUSTRIES

JOB INDUSTRIES

Featured Resume Tips

Resume Tips

More Tips

COVER LETTER BUILER

COVER LETTER TIPS

Cover Letter Job Industries

Letter Sample Categories

Interview Game Plan

Free Video

Interview Videos

Interview Categories

Industries

Job Interview Tips

Featured Interview Questions:

Job Search Top Cities

Job Search Top Industries

Job Search Top Companies

Job Tips

Top Industries

Quintessential by livecareer

I Am A Student

I Am A Career Changer

I Am A Job Seeker

Top Job Descriptions

207 jobs matching Installation And Maintenance

Maintenance Technician - Die Casting

Multi-Craft Maintenance Technician - Casting

Maintenance Engineer

Maintenance Mechanic

Electrician, Maintenance (Full-Time) - Monday Through Friday Job

785 resumes matching Installation And Maintenance

100 %

Facilities, Maintenance and Cleaning

100 %

Automotive and Motor Vehicles

100 %

Management

Build your resume today for FREE

Create a job alert for Installation And Maintenance at Fultondale, Alabama.

Great! You'll now receive job alerts for Installation And Maintenance at Fultondale, Alabama.

POST A JOB

Resume Tools Resume Tools

Cover Letter Cover Letter

Mighty Recruiter Mighty Recruiter

Company Company

Resources Resources

About About

Help & Support Help & Support